Woodturning - Blood Veins Evil Epoxy Resin !

uh welcome back folks look at the chunk on this  i found this on tinternet ebay actually and i   thought i was scrolling through and i thought  oh this looks pretty neat and i'm thinking to   myself i reckon that would make a really cool  funkadelic piece of something i'm not too sure   what i'm gonna make with it as always but stay  tuned folks because this one is gonna get crazy   yep it's spaghetti   right so there is our mold folks hopefully  this will hold out now i've done this in clear   plastic because i want you to  experience what i'm about to do so we're going to knock up some resin and we're  gonna mix up some colors just because i want   this to be you know a cool shape and it's  not really a cool shape there's not really   a lot i can do with it as it is until i kind  of get that shape so uh let's pour some resin i made earlier now i knocked this up  earlier on because i've been leaving it to   set because we're going to need this to set  for about an hour and a half before we add   some color so it makes it nice and thick so  the colors don't mix a few minutes later oh oh man i left it too long didn't i i'm supposed  to leave it just right so i could put some color   in because it's best to let it sort of set  for a bit so it mixes well with the rest   of the resin but i've left it too long and it's  gone off it's gone off it's gone off in the pot oh look i mean it looks pretty cool though look at  that that does look quite smart we should just do   a project just based on kind of that happening but  i've left the stick in there so that's not going   to be cool enough is it really i might be able to  use it on another project but so it's gone off um   too quick can't use it  can't put any color in there rubbish i'm gonna have to go again well that's  an hour and a half of my life i won't get back   right folks so i've knocked up a couple more here  uh and this one's getting getting warmer not quite   there yet but it's getting warmer 41 well it's  basically 46 in there so i'm gonna add some color   pick these up the other day um not too sure what  colors to go with because we're not gonna see   a lot of this okay folks so i'm going to have  a lot of this wood this project it's going to   be more wood than it is resin and stuff because  i think i love this piece of wood and i want to   show off all the features in it so i think we're  going to go with maybe a little bit of black um   i think that might look quite nice maybe a bit  of red what about black and red are we concurring   are we concurring or should we go with blue now  we always dab blue didn't we we've done purple   already on a project we've done gold on a project  before uh could go pink no i think we did pink the   other day as well i think i think black and red  might look quite smart let's go black and red   i'm going to pop a little bit this hit in there  now just to get things going know what i'm saying loving that color yes now black is  a bit of a dangerous color because   it could just all go black but hopefully  that's why we're waiting for the resin to   seal up and get warmer the mold basically gave way so i had to quickly  off camera this was it was just starting to pour   out everywhere and just pop the resin because  i didn't want it to leak out all over the floor   into this bowl um and obviously now all we've got  is we've got like a big black resin mess really   which wasn't really kind of my plan although  it might be all right once we've because again   we're not going to see a lot of the resin  anyway but i wanted to sort of get a bit of a   i wanted to get some resin in it just sort  of give it some shape but that's not really   it's not really panned out so this is i think this  is too thin um and it's just started to sort of   melt through it really it's way too thin i think  for this project uh and it was just gonna pour out   all over the floor so i just quickly grabbed  it off camera stuck it in there that was it   right so i think what i'm going to do now is um  i don't know i'll come back into you in a minute   hear what the french call les encompeton what  right i've knocked up some more resin some red   um and i've already put the uh piece in  the pressure pot um and i'm gonna because   it's quite big it sort of touches the sides  almost so i'm gonna just pour it in there   like this just mix this up this is a slow  hardness so it's going to take a while   to kick in but i'm fearing that this is  just going to end up with just a black   it just just it's going to be a black uh whatever  um but um so i'm going to pour this in here i don't know yeah is that and they should be  secured down oh man right take this back out   i'm gonna secure it down with some tape put  it back again right tape is on it oh oh oh   well i'm going to put a bit more on so i  reckon that could go down a bit more than that   of course hot it's hot in here not in in the  workshop in this bowl because the resin is   is going off as we speak so it's um  i'm struggling to keep this thing down   whilst the resin's going off well i  need something to hold it down there i'll do cool it's boiling in there boiling boiling come on come on come on right tape is in secure piece is secure  oh let's get this back in the pot right stay right it's in  there now so oh what a palava ah what kerfuffle ready she's gone off right ah so yeah color's not too bad  actually some let's unmold this wow look at that it wasn't  the color i was going with   but actually that does look pretty cool however we're not going to be using we're not going to  be seeing a lot of this because i'm intending   to well i don't want to make a bowl out of  this because that's not what i wanted to do so what i am going to do here is um  what am i going to do nick i don't know   i'm gonna put it on the lathe but i'm  gonna mount it this way and not that way now this piece is getting  smaller and smaller by the minute   it's kind of not what i had  planned but nothing ever is right so i'm just turning this to round and  there are an awful lot of cracks in this   look at those now that is not good because in a  minute we're going to have an explosion so what   i'm going to try and do i think i'm not sure why  that's happened maybe the wood was a bit wet but   damp and it's i don't know expanded but it's  looking quite cool i think we can get a really   cool looking piece out of this but not as it is at  the moment so i'm going to try and get some resin   in all these bits i might have to make a little  mold try and fill it a little bit with some resin   because that's no good at the moment right that's that done oh   right folks this has been in  here now uh for a few nights   so i've left it for a little while so  here we go let's see what we've got alright let's get this bad boy out did it leak and if it did did it cover the cracks i think it might have leaked all right i don't think it did leak but i'm not  too sure if it covered all the cracks up along   you know do i put a bit more resin in  now because that was up here before   and then leave it another night or two   ah or do you reckon that might have sealed  the cracks as the crack there though i can see oh that took me hours literally  if you need to make a mold   make sure you use mold release something   that i don't use often right let's get this  back on the lathe and see what funk we can make well i'm just chomping my way into  this piece and we still got our cracks   so that last bit of resin that we put in there  kind of well didn't really do much but there we go   i thought the resin was going to kind of get into  the cracks and seal it up didn't do that didn't   do that so this is the this is the look at this  wood this is going to look so nice polished up   this is going to look really really cool  especially with some of the resin features   in there as well a bit of chip out but we'll get  rid of that that's no worries no worries um but   um i'm just going to keep turning this around  we've got this big chunk here to get rid of so so we get rid of that and then i'm not  too sure what i'm gonna be making here   it's definitely not gonna be a bowl folks i'm not  gonna be making a bowl that is for sure uh so um   something else with a bit more interest to this  one i really like the wood in this i want to   try and keep as much of the wood in there as  possible so but let's keep on turning oh yeah so now i'm having to be very very gentle with this  piece because one i don't want it to pop off   the lathe like the last one did and see this  wood is so soft you've got to be gentle when   cutting into it otherwise just take  big chunks out of it we don't want that right now for the most exciting bit of all sanding right folks this is where we've got so far so i've  carved out a little pattern in the bottom here of   whatever we're going to be making it's not about  um and uh got a little room in there for my emblem   so we've got my emblem here which you've all  seen this is these are from von hank uh on uh   he's actually part of make central members as  well so you get discount off of these if you're   a member of make central so that pops in there  just jubbly so what i'm gonna do now i've gone in   and sanded this back now to about 240 grit so you  can see we've lost all the chip out now but we do   boom have this one crack left all the other cracks  have gone but we've got this one little crack   with a little bit of damage in here i don't know  what's happened there it wasn't chipped out it   was just i think it was like a bubble or something  like that but i don't want to go any any smaller   i could like kind of try and carve it all out  but then i don't know i'm going to lose more   of the wood and i don't really want to do that  so what i'm going to do i'm going to squidge a   little bit of milliput in there and if you haven't  seen milliput before i'm sure you have most of you but it's this stuff so a bit of black in there  will be just jubbly squeeze it in there and   that'll be dry in a couple of hours and then  we can finish that side off but for the moment   what we've all been waiting for we're going to put  a little bit of sanding sealer on this and look   this is the bit it's going to  look really funky check this out   good oh it's looking groovy yeah no i'm saying right  let's knock up a little tinkle of milli pack now what you gotta do is mix this up  real good just keep mixing it mixing it   kneading it and needing it a goose right so i've added in the milli putt um and that  will just set now when we just sand this down   once it's done it won't take long uh and  it'll be just doubly you won't even know   hole filled now we fill the oil it's  time for some yorkshire's finest that's just for the yorkshire grits now for the  bit that i absolutely love using misshila wax   and let's splodge this all over the place looks like marble right i've just flipped this  over to start doing something with this side   now it's always important just a little  tip for you if you're getting going in   wood turning or anything uh you're flipping  this over and you're doing up the chuck   make sure you tighten up both of these there's two  there's two for a reason they both need tightening   because if it's not secure it's gonna  come off and pop you right in the conch so sometimes it's easier to just  do it the old-fashioned way so insertion uh uh oh this shadow wax is sensational  i love using this stuff   shines up like a beauty i love  it i'm so excited right now now i used to put in back in the day when  i was wood turning i used to put in these   kind of little tops for the lid um and here's  our lid look at that that looks pretty awesome   so i'm wondering whether or not  one of these pieces would look   kind of cool in there so we've got that  one we've got this one which we could   probably try and get in there needs to  come out a bit potentially like that or a bit of this crystal look at that   i actually like that i do i like that  i think that looks quite quite fancy i'm gonna go with that oh yes   we made it there was quite a few moments  that i thought that we weren't gonna be   able to complete this one again but we  did and i think it looks pretty cool   so i opted for the little crystal in the  top there i think that looks quite cool   i know that's not going to be everybody's taste  but i had to go for one of them folks so the the   colors actually are quite nice they weren't the  colors that i was going with originally because   obviously you had a little bit of a mishap with  the mold and what happened there was the plastic   that i got was too thin very very thin and  the resin just melted it it's just gone so uh   but look at that look at the  features in there looks so cool   really really nicely finished that is it's got a  good tight fit on it at the moment i won't pull on   that too much almost only just glued it and then  we got the inside could be a little jewelry box   or something you know maybe put your sweeties  in there but i kind of i didn't want to make   a bowl i wanted to make something different  i don't know what it was going to be bars or   something but i wanted to try and keep some of  this really nice wood in there and look at that   now that is beautiful b e a beautiful we  gotta have a thumbs up on the wood at least   so if you're gonna put a thumbs  down on this video consider the wood i love the wood thumbs up if you're not  subscribed to this channel please could   you hit the subscribe button now i know that  we do some crazy different things in here   and it's not always to everybody's taste  but you know i just like to mix things up   you know doing a few things the video i put out  last week i forgot the ending bit i recorded a   little bit at the end where it's supposed to go  and that's not it folks this was just part one   for some reason that turner  just didn't end up in the video   so everyone was kind of going what did he do what  did he make did he just make a set of coasters   um kind of they were kind of coasters i suppose  but they were a beginning part of another part   project which is coming out soon so bear with  me on that one folks and again i apologize for   not kind of explaining myself properly  i did at the end put part one now on the   title so it says part one so it kind of gives  people an indication that there's two parts so what do you think of this one folks do you  like it do you like it i really love the wood   i love the resin and that that's a nice piece  come on that is a nice piece please give me that   so the most important thing is i hope that you  folks like this project if you did please hit   the subscribe button please smash me a like and  a comment below i read all the comments i might   not get to replying to all of them but i do read  pretty much all of them don't forget as well if   you could ring the bell at the top right hand  corner and it's getting a bit crazy again nick if you could ring the bell in the top  right hand corner then that will uh   let you know that i put video out again if it's  something that you don't want to see you don't   have to watch it come back next week and no  doubt there'll be something even more rubbish i mean cooler i appreciate all the  followers that have come over all   the new followers thank you very much we're  getting closer and closer to that 1 million and that is my goal i want to try and get there  before maker central for those of you that   don't know maker central has now been moved uh  unfortunately again till next year that's it now   there's no more moving 100 we're gonna be there  next year maker central we've got confirmation   from jimmy the rest of he's coming bobby duke  he's coming peter brown is coming loads of really   cool makers are going to be at next year's maker  central 20 22 may well actually april the 30th   to the 1st of may check out the website  below you can grab a ticket come and meet   me and loads of other makers we've got lots  going on there we've got robot wars there   robot wars man check it out that is pretty cool um  i also wanted to say as well for those of you that   are still watching and i know some of you do but  a lot of you don't but for those of you that are   currently still watching me now um you are also  probably the people that follow my son as well   charlie the maker he hasn't put a video out for a  while because he's just left school uh he's just   got his exam results through and he's just started  his first job um and he's been very very kind of   busy he's been he was busy studying and then  he got his exam results he passed by the way he   passed his exam results so he now he can go on to  college he's got his english his mass and he's all   the other things that he wanted to get which is  really really really great really chuffed about it   but he hasn't put a lot of content out at the  moment but i want you to please if you could   bear with him he's built his channel up quite well  and he's got his little projects that he does but   he hasn't put one out for a little while so if  you could bear with him for those of you that do   follow charlie my son link is below if you don't  uh he will be putting some more projects up soon   but it might be just a bit kind of like one here  and then every few weeks might get another one but   he hasn't put one up for three or four weeks now  so apologize from him he will be back i'll be back   also folks if you wanna know where i get my music  from check out epidemic sound the link is below   um if you follow that link and you sign up uh it  doesn't cost you any more but it helps me in the   channel also if you don't follow me on instagram  i'm still trying to get to 50 000 followers and i   did say i'll be doing a giveaway when i get there  i will do a giveaway and it will be on instagram   as well so i don't really know um when that will  be but if you can follow me on there be great   i'm on tick tock as well putting a few little bits  of crazy a weird stuff on there if you don't like   weird crazy stupid things then don't follow  me on tick tock i'm also on facebook as well   and also if you didn't know maker central have  been working for about two years nearly three   years actually on a app for the maker community  so you can follow makers like you can on instagram   but the app is more directed to the diy craft kind  of community it's just for makers diys you know   creators and people like yourself that  want to follow on projects as well so we   have taken a view to make it so that you're  following projects it allows you to follow   a project from start to finish so the makers on  there will put on there kind of like a progress   of what they've done what materials they've used  what tools they've used uh and you can follow the   projects which is pretty cool um so it's coming  out really really soon i'll leave a link below as   well so you can sign up to put your email address  in and we'll notify you of when it comes out   if you are a member of maker central you will  get access to the app uh sooner you'll be added   to our beta tested and kind of like testers but  it's pretty cool it's kind of like an instagram   but it's going to be such a great little app when  that is fully out obviously i'll announce that so   you can download it i'll be on there so you can  follow me on there as well right so i will love   you and leave you folks more than likely now  when this video is out i will be in sunny spain   finally holiday after about two years we're off to  javier and it's a really great place we love it on   there down the r l beach and i'll be up and down  there if you want to find me if you're in spain   in that area i'll see you there thanks for  joining me folks please hit the subscribe button   and take care stay safe thanks for sticking  with me on my channel my weird crazy projects   and stuff but i just want to say thank  you again for supporting me and thank you   uh for my patreons as well you're all amazing  take care folks i'll see you for the next one   you

Channel: Nick Zammeti

Views: 365,282

Keywords: RESIN CRAFTING, resin art, resin art maker, how to use epoxy resin, diy, DIYathome, woodturning, Woodturner, how to woodturn, DIY Maker, nick zammeti, wood turning, blood veins, woodturning burl wood, epoxyresinart, epoxy resin, Blood Veins Epoxy Resin Phenomena, diy epoxy, evil resin

Id: MYXMOBfhf-U

Length: 36min 4sec (2164 seconds)

Published: Thu Aug 19 2021

Reddit Comments

[u/AutoModerator]

This is a reminder to those commenting on this post (not the person that posted it): Comments not related to woodworking will be removed. Violations to rule 1 including crude jokes, innuendo, sexist remarks, politics, or hate speech may result in an immediate ban

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

[u/sstephenson001]

That’s quite cool. I like the mistakes and goofy things being included in the video and the final product is stunning!

[u/Fabulous_Ambition]

Great video buddy. Love your work and sense of humor.