Clean Outro Animation - DaVinci Resolve Tutorial

[Music] [Music] in this video i am going to show you how to create a clean and simple modern text animation inside of davinci resolve so that you can use this animation as an outro for your youtube videos hey guys i am vikash for a skyline motions and without any further ado let's take a new project and get started all right so here we are in davinci resolve 16 so let's go on this edit page and here we have to do some basic setting before i start this work so click on this setting button and here say the size of this uh project 1920 by 1080 and let's select a frame rate so in this case i'm using this 60 frame per second and i'm gonna set this playback frame rate equal to this timeline frame rate so set this value 60 and click on save and now i'm going to create this motion graphics inside of this fusion page so we have to take a new fusion composition first so just go to this media pool right click on that click on this new fusion composition and let's call it anything it doesn't really matter and set the duration of this composition something around three seconds long which is good enough for one text click on create and just drag this fusion comp on this timeline and then go to your fusion page and here we get media out node so just drag this media out to the site for now and let's take a background and start creating our motion design so just click on this background button and drag this background to the viewer and as you can see it's a black background so we have to pick a nice color so i'm going to pick this green color maybe like this and hit f2 on the keyboard call it stroke and now we have to attach a rectangular mask with this so select this stroke add a rectangle mask and hit f2 on the keyboard call it mask hit ok and by using this mask i'm going to create a thin line set this width value something around 0.01 and make it a thin line like this here we have height and as you can see it's revealing from the center of this line but i want to reveal this line from bottom to top so what we have to do we have to take one more rectangle mask so click on this button add one more rectangle this is going to be our subtract rectangle so call it subtract and select the subtract and go to this inspector window and here we don't have any paint mode so what we have to do just create a gap over here and hold shift on the keyboard and attach this subtract mask right over here like this and now we have paint mode over here so change this paint mode to subtract all right and after that let's increase the size of this and hit ctrl and scroll up to zoom in and for better output we have to turn on the guide so right click on this preview window go to guide and turn on this guide and now just select the subtract rectangle and just set it like this and let's increase the size of this and i'm going to cut this part of this line from the center like this and now select this mask and now we can animate the line from bottom to top as you can see all right and after that i'm gonna animate the position of this line so we have to take a transform node so click on this transform button to add a transform node hit f2 on the keyboard and call it stroke animation and connect the output of this stroke with this stroke animation and just drag this stroke animation to the viewer and after that hit ctrl and scroll up to zoom in select this transform and just drag it over here and set the line in the center of this frame all right and now we have to take a text node so click on this t button to add a text node drag this text to the viewer and let's type anything that you want and select your favorite font style so in this case i'm using this century gothic font style and you are free to use any font style that you want and i'm gonna set the size of this font something around point one and this is gonna be our left to right animation so we have to align this text left side so what we have to do is go over here h anchor and click on this left button and let's align this text on left side like this and i'm going to animate three different line over here with different timing so we have to take three different text node over here so select this text one hit ctrl c to copy hit ctrl v to paste hit ctrl v again to paste and let's rename it properly so hit f2 on the keyboard to rename and let's call it text2 select this one hit f2 call it text3 and now select this text to drag it to the viewer and let's change the text so i'm gonna type thanks for watching set it to regular select this third one drag it to the viewer and set it to regular and i'm gonna type watching all right so as you can see we have three different text thanks for watching and now i'm gonna merge these three text and make it a single output so take a new merge node and connect this yellow point with this text one green point with this text two and drag this merge one to the viewer and now we have two text combined in a single output and now do the same thing for this one so take a new merge node and connect this yellow point with this screen point with this and drag this merge two to the viewer and now we have three text at the same place so i'm going to create a line of spacing between these lines so select this text 1 and just drag it over just like that select this text 3 just drag it like this and now i'm gonna animate the text so just go to on frame number 120 which is equal to two second according to 60 fps and just select this text and go to this layout and here we have center x value so i'm gonna set this center x value something around point five seven basically i'm going to create a gap from the center so select this text 2 and put the same value in this so just go to this layout and here we have to set this value 0.57 and do the same thing for third one go to layout and here we have to put this value 0.57 all right and now right click on center click on animate or you can also click on this diamond button to create a keyframe on center x and select this text to right click on that click on animate select this text three right click on that click on animate and then go to very first frame of this animation and just drag this text on left side right over here and set this value in round figure something around 0.1 and put the same value for these text so select this text 2 but this value 0.1 basically we have to set the text on left side like this and now we have a linear animation as you can see so i'm going to make this animation smoother so just go to this spline window hit f4 on the keyboard to full screen let's minimize all the nodes check this text one two and three click on fit button just remove this unwanted keyframe over here select all the keyframes hit s to smooth see the cti at very beginning of this animation hold this handle and create a nice smooth curve just like that because i want to keep this animation faster at the beginning and slower at the end of this animation so as you can see we have something like this but all the lines is revealing at same time so i want to create a gap of 15 frame between each lines so what we have to do just leave this text 1 as it is and uncheck this text 3 and select this keyframe set the cti on frame number 15 hold this point and hold shift and just drag it like this and go to on frame number 30 uncheck this text to check this text 3 select this keyframe hold shift and just drag it on frame number 30. close this spline window go to very first frame let's play this all right so now we have a smooth animation as you can see now take a merge node and i'm going to use this stroke as a foreground and this one as a background so connect this yellow background point with this uh merge 2 output which is our text output and green foreground point with this stroke and drag this merge 3 to the viewer and now i'm going to animate this stroke so let's go to the center of this timeline on frame number 90 which is equal to one and a half second select this stroke animation and here we have center x so right click on center x click on animate and go to the end of this animation and just drag this line right over here on right hand side and set this value in round figure one and now i want to erase this text along with the line so what we have to do we have to take a new mask so click on this polygon button to add a polygon mask drag it over here hit f2 on the keyboard call it polygon hit ok and now i'm going to create a polygon mask so just go to very first frame of this animation and let's create a rectangular mask by holding shift like this and now i'm going to animate the mask so let's go to the center of this timeline on frame number 90 which is equal to one and a half second according to 60fps and here we have already an attached animation so right click on this and remove it first and then right click on that and click on animate and create a fresh new animation and go to the end of this animation select these both control points hold this control point hold shift on the keyboard and just drag it like this and as you can see this mask is moving along with the line all right and now let's create a smooth animation so just go to this spline window hit f4 on the keyboard and for this time check this polygon and a stroke animation only click on fit button just remove this unwanted keyframe over here and select this keyframe hit s to smooth and set the cti at very beginning of this animation and let's create a smooth animation one by one so uncheck this uh stroke animation and for this one just go to the end of this animation because i'm gonna keep these animations slower at the beginning of this animation and faster at the end of this animation so hold this point and let's create this type of graph and do the same thing for this stroke animation so uncheck this polygon and check this stroke animation click on fit button and create a smooth graph just like that and go to spline window go to very first frame of this animation alright so now we have a smooth animation all right and now let's cut this extra part so we have to connect this polygon with this text so connect the output of this polygon with this text like this and go to very first frame of this animation let's take a look again all right so it's looking nice and after that we have to set this text in the center so select this merge 3 final output and add a transform node just after this merge 3 drag it to the viewer and hit f2 on the keyboard call it transform hit ok and drag this transform to the viewer and here we have to set the text in the center so maybe set this center x value in round figure 0.25 and then we have to connect the media out with this transform and then go to your edit page so as you can see this is left to right animation and now we have to create a right to left animation so what we have to do select this fusion composition hit ctrl c to copy and let's create a duplicate of this by hitting ctrl v and select the cti at the second one and go to your fusion page and here we have to remove all the animation first so just go to the end of this animation and find out the animated node so as you can see here we have a keyframe icon over here that means it is an animated node so select this a stroke and let's remove the animation so just go to the end of this animation where the position of this line on right hand side and right click on center click on remove path 1 and remove this animation and do the same thing for all animated node so select this polygon for this one just go to very beginning of this animation where the polygon shape is in rectangle form and right click over here and click on this remove polygon and do the same thing for this text so select this text go to the center of this animation where the text is visible and go to layout right click on center remove this animation select this one go to layout right click on center click on remove path select this one go to layout right click on center click on remove path three and as you can see we don't have any animation so we have to reanimate this text so what we have to do just go to on frame number 120 which is equal to 2 second and let's increase the size of this and for this one we have to align all the text on right side because this is gonna be our right to left animation so select this text one and go over on this text section and here we have each anchor so click on this right edge anchor select this one go to text section click on this right edge anchor select this third one go to text and click on this right edge anchor all right and now we have to set the text just after this line so just drag it over here and just go to this layout set this center x value in round figure something around 0.93 it's perfect and do the same thing for these text so select this text 2 go to layout and put the same value 0.93 go to layout put this value 0.93 and after that we have to animate the text so just go over on this 120 frame which is equal to 2 second and right click on center click on animate select this text 2 right click on center click on animate select this text 3 right click on center click on animate and just go to very first frame of this animation and select this text and drag it on right hand side and set this value something around 1.4 maybe and do the same thing for this one so select this text 2 set this value 1.4 select this first one set this value 1.4 and just drag this merge 3 on this viewer just go to very first frame of this animation and let's create a smooth animation so just go to spline window hit f4 on the keyboard to full screen let's minimize all the text check this text one two and three click on this fit button just remove this unwanted keyframe over here and select these keyframes hit s on the keyboard to smooth and just go to very first frame of this animation hold this point and just drag it like this and create a nice smooth curve and now i'm going to create a time gap between these texts so leave these text one as it is leave this text three select this text two only select this keyframe and go to 15 frame forwarding time and hold this keyframe and set it on frame number 15 go to frame number 30 and this time uncheck this text 1 check this text 3 select this keyframe and just drag it on frame number 30 and close this spline window go to very first frame and let's take a look alright so now we have a nice smooth animation and now let's change the text so select this text one go to text section and let's type your second line and now i'm going to create variation on the text so select this first one set it to regular select the second one set it to bold select this third one set it to bold all right and now it's looking something like this and after that let's animate the line so what we have to do select this stroke animation go to the center of this timeline on frame number 90 which is equal to one and a half second and right click on center x click on animate and go to the end of this animation and just drag this over here and set this value in around figure 0.5 and now let's animate the polygon mask so just select this polygon and go to on frame number 90 right click over here click on animate go to the end of this animation and this time select these two control points hold this point hold shift and just drag it over here and set it like this all right and now we have a linear animation so let's make this animation smoother so go to spline window hit f4 on the keyboard to full screen and this time let's minimize all the nodes and uncheck this text 3 check this polygon and stroke animation only click on fit button select these keyframes hit s to smooth and let's create a smooth graph one by one so check this stroke animation only go to the end of this animation and hold this handle and just drag it like this and create a nice smooth curve and do the same thing for this polygon so uncheck this stroke check this polygon click on fit select this handle and drag it like this and create a nice smooth curve and close this spline window go to your edit page and now we have to create multiple copy of this so select these both fusion composition hit ctrl c on the keyboard to copy and paste two times so as you can see we have six composition for six different lines so let's jump on the third one and go to your fusion page and here we have to change the text only so i'm gonna do this in fast forward and as you can see it's done and after that we have to do one more thing we have to animate the stroke at the beginning of this animation and the end of this animation so just go to your first fusion composition go to your fusion page and here select this mask just go to on frame number 60 which is equal to one second and select this mask right click on height click on animate and go to very first frame of this animation and set this height value 0 and go to spline window hit f4 on the keyboard this time uncheck all the nodes and check this mask only click on fit select these both keyframe hit s2 smooth hold this handle and just create a nice smooth curve and close this spline window go to edit tab and now we have a stroke animation as you can see and do the same thing for the end of this animation at the end of this animation we have to increase the duration of this composition so right click on this last composition click on this change clip duration and right now this is three second long so i'm gonna increase the duration of this uh fusion composition to four second click on change and then go to your fusion page and here select this mask go to frame number 180 which is equal to three second and right click on height click on animate and go to the end of this animation and set this height to 0 alright and go to spline window hit f4 and let's minimize all the nodes and check this mask only click on fit button select these keyframes hit s to smooth go to very first frame of this animation hold this handle and create a nice smooth curve just like that and close this spline window and go to your edit page and here your animation is ready for render all right so turn on the loop button go to very first frame of this animation and let's take a look all right so it's looking nice and that's all for this tutorial guys i hope you like it if you like it then hit the subscribe button click on the bell icon and also hit the like button if you like this video and i will see you in next tutorial till then bye bye

Channel: Skyline Motions

Views: 19,605

Keywords: DaVinci Resolve, Tutorial, Clean Text Animation, Youtube Outro, Step by step tutorial, Easy tutorial, Motion graphics, Text for youtube video, Outro Animation, Learn DaVinci Resolve, DaVinci Resolve Template, DaVinci Resolve Project File, Skyline Motions, Modern Text Design, Latest Title Design, 2020, How to Animate a text

Id: CxbUnTiQI_U

Length: 26min 0sec (1560 seconds)

Published: Thu Aug 20 2020