JTS Shotgun2

to disassemble um 12a KY is very similar to an ak-47 you have your recoil assembly in the back it has a little locking pin push down on it and push forward it has your m12 a car has a hinge dust cover with Picatinny rail to just to take out your recoil assembly push forward and pick up you okay your recoil assembly in the moves push down on your safety remove your ball all the way up and out the gun has an Aki fire control group hammer and trigger the bolt remove similar to an ak-47 rotates out and forward instead of the a K that rotates to the left this rotates to the right rotating locking bolt reassembles in the opposite direction [Music] make sure your bolt is in a horizontal position when you reassemble it into the gun fall into the gas system all the way to the rear down and forward recoil assembly in the back of the box for and locks in desk over

Channel: JTS GROUP

Views: 2,205

Rating: 5 out of 5

Keywords:

Id: K6VlQS8vgKQ

Length: 1min 58sec (118 seconds)

Published: Thu Jan 30 2020