[959] Swedish Anchor Lås 833-3 Padlock Picked and Gutted

this is the lock-picking lawyer and what i have for you today is an anchor loss model 833 - 3 padlock this Swedish lock was sent to me by Hans Christian in Germany and I was certainly pleased to receive it because not too many of these make their way to my side of the Atlantic it's a very well-made lock with a 60 millimeter wide hardened steel lock body and that of course is also chorim plated then we have a high shackle guard protecting an 11 millimeter hardened steel shackle the core is a disc detainer design with I believe 10 discs which is far above average and all of those discs have false gates so let's see what it takes to pick it open I'm anticipating a bit of a challenge and then of course I will take it apart to show you what's inside the first thing we're going to do is rotate all of those discs as far clockwise as they will go then I'm going to get the pic that Bosnian bill and I made and try to pick up disc number one okay I think I have disc one let's find disc number two and get to picking now the first thing I'm going to do is try to get everything into a gate not necessarily the true gate okay number two is in a gate I think threes in a gate I can't be sure it's not binding very tightly click out of four click out a five six seven eight-nine I just got a fair bit of movement on the core that probably means everything is in a gate okay ten is binding there we go that's in a true gate now let's go back to the beginning okay - feels like it's binding in that gate there we go much looser three feels loose four feels loose okay five okay that's definitely in the correct position now six now I should have left him where he was he's binding in that new gate let's take him back there we go six is where it belongs I think seven and we got this open okay let's take it apart and see what's inside now to take it apart we need to remove an Allen screw that's right down this hole normally that hole is blocked by the shackle but now that we have it open we can access it and remove the core retainer now we have a nice thick plate guarding the core and below that is a thick spinner and under that is the core so let's take out the first disk and then I should be able to remove the rest of the core okay let's get that sidebar and drop it into this channel and I also dropped a spacer let's put that up here okay let's start dropping these disks out that's number one here's two and a spacer three spacer for noticing this Halfmoon shape I'm assuming that's some sort of anti pick design but frankly it didn't seem to affect me very much I'm not entirely sure why they do that this is number six seven here's eight nine ten it looks like I was wrong looks like there are 11 disks I miss count no that's 11 okay let's take a look at one of these disks we should be able to say a false gate and at least work I'm sorry a true gate and at least one false gate and that's what we have here this is the true gate that is a false gate and as you saw it certainly makes picking a little bit more tricky all in all not a bad lock a tricky pick and probably a lot that I would consider using in any case that's all I have for you today on this anchor loss model 833 - 3 padlock if you do have any questions or comments about it please put them below if you like this video and would like to see more like it please subscribe and as always have a nice day thank you

Channel: LockPickingLawyer

Views: 852,075

Keywords:

Id: Br1HR-LUgXg

Length: 5min 41sec (341 seconds)

Published: Wed Sep 18 2019