[916] Abloy 341 “Enforcer” Padlock Picked and Gutted

this is the lock-picking lawyer and what i have for you today is an a ploy model 3:41 enforcer padlock people often ask about locks that I would use and this is one of them it's something that I purchased pre-owned for my own use but it came without a key I do have a set of keys and some discs that I can drop in but I need to get this open first it has an a ploy classic core which is one of the trickier pure disc detainer locks it has ten discs plus a gated spinner upfront each of those discs has false gates and then there is that offset D shaped key way there should also be at least a couple of a ploys anti pick discs in there I'm going to be using this tool that I made a couple months ago just for these D shaped key ways it's essentially a copy of Matt Smith's design he's also known as Huxley peg but before I get started there's one thing that I should address I'm going to pick this in a vise I generally don't pick padlocks and vices because it's not terribly realistic however when using this rear tensioning tool it's near impossible to hold the lock and operate the tool at the same time so to salve my conscience and satisfy my need for real-world solutions we're just going to pretend that this vise is a friend holding the lock for me okay we've got that secure in there let me give you as good an angle as I can and the first thing we need to do is rotate all of those disks as far clockwise as they will go now that that's done we can insert this pic and I'm going to start picking in the back I usually start in the front but I also normally start I'm sorry I normally tension from the front it's usually a good idea to start picking where you tension okay so I'm tensioning off of ten I just got a little click out of nine eight seems loose I'm just trying to get everything into a gate right now seven feels loose nice click out of six after a fair bit of travel nothing on five four nice click on three click out of two and fair bit of movement on that core nothing on one or the spinner let's go back to the back of the lock okay number nine feels set so does eight at least they're in a gate so two seven six feels set so does five four three this is strange pretty much everything feels like it's it's a little bit loose so here's number one okay got a little click out of one let's check to make sure that spinner is not blocking us and no the spinner is doing well okay one click out of two and a fair bit of movement there three feels set four feel set five six seven eight nine not sure what's holding us up right now everything feels pretty loose oh the spinner is binding okay got a little click out of the spinner we should be pretty close now nothing on one to feel set three okay got a couple clicks out of three four okay got some turn and we opened up okay let's take this apart and I will show you what's inside of here okay we will need to hmm I think I'm going to have to take this apart with the tool in there because I would have to lock it to get the tool out and these AB boys are key retaining this is something new for me I don't think I've ever taken one of these apart with the tool now to take this apart what I did was I removed this set screw through this hole normally that hole would be blocked by the end of the shackle so that's not something you can normally do and let me see if I can pull this whole apparatus out at once okay okay now I should be able to take this tool out okay I dropped the side bar right here and then I'm gonna just start laying these disks out right in this area the first is the spinner you can see there's a gate in that spinner and we have a spacer and we have a disk with two true gates in it so this is master keyed that's interesting another spacer another disk with two true gates in it well I'm certainly glad I am I'm reek eNOS another two gates in this one looks like all of them so far have two gates and I have not seen any any of a ploys anti pick disks okay this one only has one gate and because of that we also have a false gate in it this one has two gates in it spacer here is one of ABLOY Zant I pick disks you can see that little notch out of the side there that prevents the more common Chinese tool that's used to open these D shaped key ways that will not even engage that disk okay looks like mostly the ones up front were the master key disks so we have 1 2 3 4 5 disks that are master keyed and 1 2 3 4 5 that are not master keyed and have the false gates in them so that's a little bit of a disappointment but I guess it doesn't matter because I am going to be replacing all of those in just a minute but that's all I have for you today if you do have any questions or comments about this please put them below if you like this video and would like to see more like it please subscribe and as always have a nice day thank you

Channel: LockPickingLawyer

Views: 434,465

Rating: 4.9373798 out of 5

Keywords:

Id: oxfUmcMzx08

Length: 8min 44sec (524 seconds)

Published: Fri Jul 05 2019