Microtech UTX 85 Torture Test lets see what it will take

alright guys you're getting ready to watch the torture test of the micro tech UT x85 there's gonna be a little bit of blood there's the band-aid to prove that but I hope you guys enjoy stay tuned [Music] [Music] hey guys welcome back to is your six covered and again we're doing another torture test this one was gonna be with the micro tech the UTX 85 so this is a single edge I'll show you guys the part number and then we'll get started with some testing first thing is we need to go up to the testing so what we're gonna do is we're gonna go ahead and start the sing-off you guys if you haven't seen the videos in the past we've done some crazy stuff to these but we want to make sure that they work so that when you guys go out and buy them you're getting a nice quality knife so this is a blue UTX this is the partial serrated and right here is a serial number four one nine five eight so I'll put that up nice and close so you guys can see that and then this is uh from June 2019 so again like to thank Jason McCoy and Corey Campbell for helping these videos so that you guys can see how durable these are so I got a little lanyard hole in the back we're gonna tie some P cord to it and we're gonna drag this thing to the shop and we'll get some testing done we're gonna go through we're gonna utilize the rubber mallet and let's see if I can get a knot that's going to be worthy so we'll come in here and we're gonna try something we haven't tried in the past is we're gonna check to see how good this belt clip is and kind of just this lanyard hole this is very very extreme I don't see people needing to do this but that's why we're doing this because we're doing it so you don't have to if I can get it through here alright looks like I got it now so we'll put a couple knots in here and we will drag this thing up to the shop and then we will do some testing where the fun will begin so paper test I don't do the paper test these things come razor-sharp if you guys have ever seen one of these or looked at my other ones but they are right out of the box razor sharp alright so you're just gonna have to believe me on that so we'll confirm this not because it's not looking very good let's throw one more overhand and then I want to attach this to the bumper we're gonna drive up and we are gonna track this poor beautiful knife all right so that should hold and I'm gonna need a little bit of rope so guess what I just happen to have this beautiful Microtech knife right here we'll attach it Wow cut quick we will attach it to the hitch here and let's just do a quick knot like that and off we go so this beautiful knife will be dragged across these big old rocks here man I hate to do this to this knife but we'll do what we got to do in the name of science [Music] [Music] all right let's see how did I hope it didn't scratch it at all actually that's not bad yeah let's take this off here let's see what it looks like we'll give it to you old child napkin and got a little bit of stuff a little bit of nicks and stuff but not bad at all so right now we know that the pocket clip holds up well we know that the tungsten glass breaker is still there let's see how it does let's see the fires oh alright I got a little dirt in there yeah that's it that's all it was a little dirt so clean these you know use rim oil flush it out and do this upside down and that'll clean it out and then blow it out if you need to let's get on to the good stuff alright let's go turn this into a nail there's my favorite one these work so great the lock out of the blocking system forum we're gonna hammer through like a nail and have some fun look at that blood already no no that ain't bad alright so let's clean this a little bit before we get started with the test to make sure that everything's right normally we'll just fill this up nice big squirt flip it over you see it all dripping out kind of fire it till any grime dirt sand particles whatever the case is one more time that blood alright alright let's just wipe this thing off and we shall have some fun so micro tech says use rim oil so we'll put that next to that alright you guys so now we're off to the what I used to call the nail test so the front locking block is what basically holds us in place and it's basically the same as a non fixed or a fixed blade it's almost as strong as a fixed blade so I'm going to go ahead and sink this through and then I'm gonna have fun trying to get it out but this one's a little bit shorter so we'll see what happens this rubber mallet it's cold so it's through I'm gonna go too far through or it's gonna be a nightmare to get out but you can see that it's it definitely holds up it's strong the the locking mechanism so a lot of people on that last torture test that we did they just couldn't believe that this could hold up David they thought it would fail very easy but as you can see it did a great job so now the fun part is getting this thing out of here so stand by I should have left that clip then I guess I show this alright so another good test besides trying to get this thing out of here is the back-and-forth motion it's basically seeing what if there any type of slack so we'll just kind of see if I can get this out here all right you can see the blade sucks the blade still looks really nice clean it off a little bit and tell you what these things are great what else can we do what else can we do let's cut some let's cut some webbing see how that the sharpness is so I'm gonna fold this over once like butter let's do twice all right make sure you guys don't think I'm cheating yeah so there's doubled up blade leave that slice right do you know what we got some fire hose let's try fire hose what fireman doesn't have fire all right so I'm gonna cut it we'll just kind of we'll just kind of start off that's the one thing I do like about having half serrated is these seem to work a lot better with your different types of rope webbing and fire hose this is cotton double cotton jacket so let's do this there we go I'm just gonna how this cut it nice and simple just like butter so you can see that's pretty tough stuff this one's rubber lined inside to keep the water from seeping out through the cotton but I mean it's it's tough so what else can we do we drug it down the rocks we stuck it in like a nail let's just let's try to pretend it it is uh-oh you know we could do this again we got an I think the blades long enough to do this that was easy let's do that this is probably the hardest thing is cutting across green and this is just half a piece but this blades a lot smaller I can't I can't per say go all the way across like this so we'll cut it in half and or try and see what happens so I'm just gonna go straight what's tougher the mallet or the Microtech knife and as you can see it's it's it's working hard and you can tell it the blade because of the way it's cut wants to kind of come in at an angle there but we're gonna continue on look at that I did a good job so we'll go across let's make a nice let's make a nice little square here and now I'm not being nice to this at all guys leave that it's busting but let's try to go from a perfect square I said perfect square alright let's see how we did not too shabby so again if you get a chance these do cost more money guys we're going to do this clean the blade off and of course it works great these are a little more than your basic Walmart Big Five knifes but you're getting a lifetime warranty you're getting something that's made completely in America this steel on this because you'll have people ask me but it's the 204 piece this one comes with blood on it now but this is a great knife that's there's not much more I can say about these things except they're built like brick blank house so these things are well made in America there's the belt clip guys see that the tungsten oh it's still the same serial number tungsten glass breaker works great other than that man I'm telling you these are the things these are a little bit shorter than the ultra tech so they're a little bit smaller if you're looking for something a little bit smaller overall dimensions I'll put but in the description or I'll put it on the on the screen there but you cannot beat these things they're great so with that said hopefully you guys enjoy I had a good time I loved being able to torture test these knives unfortunately you know they do get a little banged up I know a lot of people use these is kind of a collector's knife for a safe Queen and there's no problem with that as well but these are great so I hope you guys enjoyed the video like share and subscribe seeing the guys on the next one take care you

Channel: Isyour6covered®

Views: 30,897

Rating: 4.852427 out of 5

Keywords: microtech utx 85, utx 85 torture test, microtech tortue test, ultratech torture test, UTX 85 microtech, knife test, cut test, razor sharp, best edc knife, edc, every day carry, top knife, best knifes, microtech torture test, utx85, microtech utx85, #microtech, #microtechutx85, isyour6covered, knife testing, blade testing

Id: 32JOrqtpyls

Length: 14min 17sec (857 seconds)

Published: Tue Dec 10 2019