It's Happening! Things Are Getting Serious At The Shop!

foreign what's up guys so today I'm by myself Paul is gone Ben is gone so I can actually get something done see this shed right here it's gotta go bye-bye see Paul's doing work over there to build the new shop and this shed has got to go he was just gonna throw it all away but I want it I want to be able to park the Nova and the winning truck right up there it's got the trailer on that I'm gonna kick the crap out of the red square body with I gotta tear all this apart I think there's a few bolts I think they're nails or they might be screws take all that off Paul wants the tin he's gonna get another conic and he's gonna make a roof or something and build himself another shed it's warm finally actually I need to address that Glendale it is 54 degrees I'm in shorts and everything because Paul and Ben are here so I can wear what I want here we go foreign that's for all the people giving me hate that I can't back up I just looked I don't think Paul has one wood Hammer with like to pull the nails out with they are all the mechanic this is gonna take forever I have a feeling okay I had to go take Grandma Lolly's car to go to my house Paul doesn't have I he might but I couldn't find any a single wood Hammer with that to pry the nails off shows you what he does for a living like I gotta get to the nails on the other side of this so I gotta tear all I gotta pretty much tip all this over without dying so I can get to the nails on the back side there's birds living in there that's nice let's see if I can do this without dying oh from second thought I'm gonna try going from the back so I don't have to move all the wood we'll see how it goes you sure did use a lot of freaking nails there we go one of the law look at all these nails how many nails did he need to use 5 10 15 20 use 20 Nails on each board how the heck am I or we got in somewhere [Music] just drive forward all right so that kind of worked um I haven't been showing you much but I had to move all the wood and now I just saw that I'm gonna push the rest over with the tractor of course you are I don't think you're gonna get it off there Dave is that like a it's not a doubt that was a challenge look how solid those are on there though you didn't make it you didn't hit it fast enough I know what I'm doing [Music] a lot more stuff to do now all right so I didn't get too much done I feel like we always say that I am still standing under the shed which it shouldn't be here but I couldn't do much by myself I got the side beams things off I yank through there with the tractor I went up on top pulled Nails out of the top so till next time just called us said Lunch is ready and that we should all come up there so we don't skip Mills around here so we're headed right now holy wow would you look at that boys came up for someone they're having themselves some sweet chili beef and green bean bowls hello fresh takes a hassle out of meal time this spring by delivering pre-portioned ingredients and easy to prepare recipes right to your door skip the checkout lines and get outside in the warmer weather because hellofresh has dinner covered looking for more ways to save this spring hellofresh is cheaper than grocery shopping and 25 percent cheaper than takeout we have been loving hellofresh we have not had one bad meal so far and there's no worries if you're not a pro in the kitchen hellofresh's foolproof recipes arrive pre-portioned and ready to prepare in just a few steps what do you guys think that's really good it's almost more than I can eat mine's gone if you guys want to try this go to hellofresh.com and use code fabrats50 to get 50 off plus your first box ships free save time money and stress and get hellofresh [Music] thank you foreign [Music] I think it's going to come right down we'll cut this sucker right in half and then push it over and then we'll climb up on top take all the tint off we'll have her down in an hour go grab a ladder not quite which way all right this way probably don't [Music] you ready to go up I don't think I need to cut the top one really I think those will push off of it and then the top one comes down so I'll go inside and push on it [Music] foreign [Music] [Applause] [Music] we're winning here we got one piece of tin left enough to bend it they're hot got it I worked last piece of tin and then we pulled the roof off of this thing all right that worked there we go tins off we got to pull the cross Runners and then this thing is poured down and we'll have a ton more room to turn around right here tomorrow the dirt work starts over there so hopefully if any luck by the end of the week we about got a pad ready [Music] [Music] keep on going down where's the bird we evicted those birds well I know where all your chicken fellas No Doubt just living their best life in their insulation yep so pick that up turn them off pretty good they're unusable I'm gonna stack this on we'll hook it onto Hunter's truck we'll throw a strap over it and I'll drive slow 100 to 100 can drive slow we'll see okay well I'm going up to the house it's been real it's been real all right it's a new day we're working on the new shop so as you can see we've got some stuff cleaned up but we're dealing with water Plumbing issues right at the moment so I have an irrigation drain that runs down through here and I had a valve we tore it out now we're just plumbing pipe then we're gonna have to go up the driveway dig it up put this valve back in it so Sharp's coming I got guys showing up tomorrow to start dirt work so I gotta have everything ready for them so we're doing it [Music] that at least gets it outside the shop all right we got this coupled together this is just a drain line the valve is going to be Upstream so it can run underneath my shop and it won't matter because there's going to be no pressure on it ever so I'll cover this up and then we'll get to work on the rest of this foreign needs a coupler hopefully Landon can turn one up and we can finish that we're gonna move the pig pen now that's the next job I uh seem to have caught a fire out here don't worry I saved the drink it's got a little hinge on this one side I was Adam sitting on that pole and I was just cutting away and I'll let George fire was all around it safely though so I'm cutting all the weld on this big pen so I can pull it apart the custard wood too okay I don't have anything can you lift the whole thing up it doesn't seem like it's buried it's lifting it up no what other s oh it's the middle land go on the inside [Music] okay go grab it figure out how to cut the rest of it all right that seemed really easy you can play baseball with it that's their own man 's pretty beat up it was junk when I put it on this I'm gonna just scrap it let's get that feeder out of here and then I think I'll finish demolitioning this thank you got a bunch of stuff to do this big cottonwood's gonna have to get cleaned out because I'm gonna make something down there I mean that that may be a good like fire pit area and kind of cool probably all right we got us a pretty good Jag a scrap metal we're gonna halt down to the dump they'll recycle it then we'll come back load all the wood [Music] foreign we got connections so we're going to the dump for us so we can dump this stuff [Music] yeah right [Music] thank you [Music] [Applause] foreign we're out of here all right we're back now we just got to pick up all the wood stack these panels out of our way and I think we'll have this ready for some guys to do some dirt work tomorrow so look at this moved [Music] we got a bunch done we've got Woodshed is gone tore it down we got Pig Pen tore down we got a bunch of dirt work going on got her x'ed out over xed out it's not quite dry enough so we can't put it back in but shop project is going and uh things are happening it's a little hectic around here we got demolition derbies to get done we got shops to build stuff to do but we're managing we're getting it so thanks for watching

Channel: Fab Rats

Views: 334,850

Keywords: fab rats, shop, fabrication, shop build, shed, diy, tractor, work

Id: NDhu57fgEAI

Length: 17min 6sec (1026 seconds)

Published: Wed Apr 19 2023