How to add a Linksys router as an Access point

Video Statistics and Information

Video
Captions Word Cloud
Reddit Comments
Captions
how to connect links ease router to another to expand a network as an access point in addition to increasing your network capacity a second router can also be placed and Wi-Fi blackout areas where the wireless signal is weak or non-existent this video teaches you how to add a link C's router to your home or small business network setting up the first router connect router want to a computer use an Ethernet cable to connect from one of router ones LAN ports to a computer's Ethernet port for the purpose of this video we will refer to the tp-link router as router one inch you can also connect to the router wirelessly using the Wi-Fi name and passkey open command prompt and type it config to find the IP address for router 1 IP address is 192.168 0.1 open up web browser enter 192.168 dot 0.1 tp-link router use admin as the username and password find the default IP address for router one network LAN IP addresses 192.168 dot zero dot one enable DHCP on router one click DHCP on left page enable in most cases the DHCP server is turned on by default you can usually find these settings under network settings or LAN settings the admin user interface layout is different from one router make and model to and other wireless network in falled wireless network name is Ned [Music] wireless password is 1 2 3 4 5 6 7 8 9 disconnect router one from the computer removed the ethernet cable between router one and the computer setting up Linksys router for the purpose of this video we will refer to the links ease router as access point connect link sees router to a computer use an ethernet cable to connect from one of Lynx's LAN ports to a computer's ethernet port open command prompt and type it config to find the default IP address for link sees router open up web browser enter 192.168 dot 1.1 this opens the admin log in screen for link sees router continue with an open and unsecured Network I understand continue link sees router use admin as the username and password configure links ease router Wi-Fi name and passkey they should be identical to router one basic wireless settings manual they should be identical to router one [Music] wireless security settings power to personal they should be identical to router one [Music] then click save settings to save configure [Music] assign a new IP address to links ease network setup to prevent IP conflicts link sees router needs to have a different IP address than router one in this example do not use the IP address 192.168.1.1 six eight point one zero point two five zero disable DHCP on link C's since DHCP is enabled on router one it should be disabled on link C's to prevent IP conflicts [Music] then click save settings to save configure bringing your network online connect the first router to the link sees access point use an Ethernet cable to connect to a LAN port on router 1 then connect to the land port on link sees access point make sure you're not plugging it into the wine port as they look similar you you connect other computers and devices this can be done wirelessly or by connecting ethernet cables to land ports on router thanks for watching don't forget like and subscribe you
Info
Channel: NETVN82
Views: 193,651
Rating: undefined out of 5
Keywords: netvn, 192.168.0.1, 192.168.1.1, linksys router access point, add linksys to network as an access point, add linksys to your network as an access point, setup linksys router as an access point, linksys ap mode, linksys access point setup, linksys access point configuration, linksys ea2500, linksys ea series setup without cd, linksys ea series access point mode, access point, wireless access point, linksys access point, adding second wireless router to network, add linksys to network
Id: ouQzs2xBTPw
Channel Id: undefined
Length: 8min 38sec (518 seconds)
Published: Fri Oct 11 2019
Related Videos
Note
Please note that this website is currently a work in progress! Lots of interesting data and statistics to come.