How to add NETGEAR Router to your network ( Access Point mode ) | NETVN

how to connect Netgear router to another to expand a network as an access point this video teaches you how to add a Netgear router to your home or small business network connect router 1 to a computer you can also connect to the router wirelessly using the Wi-Fi name and passkey open command prompt and type IP protocol configuration to find the IP address for router 1 IP address is 192.168.0.1 tp-link router use admin as the username and password wireless network info wireless network name is Ned Ned Ned an underscore 5g wireless password is one two three four five six seven eight nine disconnect router one from the computer setting up Netgear router connect Netgear router to a computer use an ethernet cable to connect from one of Netgear LAN ports to a computer's ethernet port open command prompt and type IP protocol configuration to find the default IP address for Netgear router open a web browser enter 192.168.1.1 I agree next no I want to configure the internet connection Mitchell next you are required to create a new password for the first time you log in dot remember the password the username is admin and password you created before [Music] configure Netgear router Wi-Fi name and passkey they should be identical to router one in basic home screen displays select wireless to change the network name SSID type a new name in the name SSID field to change the Wi-Fi password in the past phrase field enter the password click the apply button dot your changes are saved they should be identical to router 1 [Music] configure access point mode in advanced home screen displays select advanced setup and select wireless access point check the enable access point mode checkbox selected check the installed information click the apply button dot your changes are saved connect the first router to the Netgear access point use an Ethernet cable to connect to a LAN port on router one then connect to the one port on Netgear access point connect other computers and devices this can be done wirelessly or by connecting ethernet cables to land ports on router thanks for watching don't forget like and subscribe this is IP address of Netgear access point [Music] you you

Channel: NETVN82

Views: 319,868

Keywords: netgear access point mode, netgear r6220 review, netvn, netgear wifi extender access point mode, netgear wireless access point, 192.168.0.1, access point, netgear wifi extender, 192.168.1.1, netgear r6220, net vn, netgear access point, adding second wireless router to network, netgear r6220 setup, netgear wifi access point, router access point, how to

Id: r1vSs0ssLNM

Length: 5min 37sec (337 seconds)

Published: Sat Nov 02 2019