Packet Tracer - Skills Integration Challenge - 7.4.1.2

hi friends today we are going to solve a packet tracer activity skills interrogation challenge before coming to these packets or activity first if you're watching our channel first time or if you like to get this type of technical videos in future considered subscribing also don't forget to enable that Bell icon near to the subscribe button so that you will get the notification message whenever we upload a new video coming back to our packet tracer activity here we can see our addressing table and this addressing table is incomplete some of the default gateway informations are missing here okay we will update that sure we can see the requirements complete the addressing table documentation okay then configure our one with ipv4 and ipv6 addressing invasive before coming to this away will complete our addressing table sure is our addressing table coming to the device so here we can see a manager and to default the gateway here we how to fill it commit your topology here we can see manage or a and accounting dot PKA so this network is connected to this interface on this router r1 so obviously the default gateway for this network will be the IP address or ipv6 address whatever set for this interface on this row that interface is g0 star zero but before that I think we can update all these ipv6 at default a gateway because here we are using only one or our that is r1 and here we can see that the link local address so this a link local address will be used as the default gateway so we will copy this address and we will a copy will update here for this ipv6 accounting or manager or for this right now we will find the default gateway for these devices managed or a and accounting dot PKA that is network is connected to the interface at g0 star 0 on this router r1 we already discussed so here we can see IP address up for the interface G 0/0 on this device r1 we will copy this ultras this is the default a gateway for this manage or a and accounting your PKA also we can see these two devices manager B website or PKA which is connected to the interface G 0/1 on this same router r1 and here we can see the IP address for that interface a gigabit at our 0/1 we will copy this address this is a default gateway for these devices so now our addressing table is updated so what is next configure our burn with ipv4 and ipv6 addressing we can do that too here is a retro sync table so we'll configure g0 start 0 ipv4 address so here we can see that we will copy this IP address and here we can see the subnet mask so coming to our one CLI enable configure terminal we will go to the interface gigabit the turns euros are 0 okay and here we are going to set the IP address it's here then we have to give the subnet mask a 255 255 dot 255 dot 192 now we will set ipv6 address it's your reveal a copy researchers ipv6 address ok we will give an ashram command yes also we have to set this a link-local address for these interfaces so we have to set for this circuit with the current 0/0 fe80 double : 1 okay so it's ipv6 address so here is that ultra selling the local link local ok now we will go to the next interface that is gigabit the third 0/1 and we will set the IP address we can exit we will go to the interface a gigabit eternal 0 / 1 we will let's set the IP address coming to the dressing-table here we can see IP address we will copy this address then coming to CLI here will paste it then the subnet mask 255 dot 255 dot 255 dot 192 now we will set ipv6 address here is that we will copy this address ok ipv6 address it's here ready now we will set IP v6 selling local address it's fe80 double colon one I say Lingle okay now we will give Nash run command now we will go to the next requirements configure s1 with ipv4 addressing yes 2 is already configured okay we have to configure only this switch s1 coming to your addressing table we will I get the IP address details of s1 here we can see that VLAN 1 we have it to set this IP address subnet mask and the default gateway okay coming to our s1 CLI now we will search high Pietra so for this which is 1 we will go to enable configure terminal we'll go to the info file so villain 1 and we will set the IP address we will a copy from our addressing table here is our address then this subnet mask now we will exit and we will set default a gateway its IEP default gateway here is actress now we will bring this interface up using no shut command ok we have to go to that interface again ok we come out from that interface interface vlan1 and here we will give no shutdown command yes so here we can see no VLAN change that state - up now we will let's save the configuration copy running-config startup config now we will go to the next requirements it's a configure manager a with ipv4 and ipv6 addressing the rest of the clients are already configured ok we are going to configure only this client manager a coming to manager a the scope IP configuration now we will come to our addressing table here we can see manager a here we can see our a truss will copy these archers IP address then they submit to mask then we have to give the default gateway it's here in our spreadsheet now we will set ipv6 address it's here you'll copy this ipv6 address and here is the prefixes large 64 then the default gateway it's a fe80 double colon 1 ok it's almost done and here we can see our completion status only 72 out of 80 ok we will check the next two requirements a verify connectivity all claims should be able to ping each other and access the websites own accounting dot PK a and website at PK a right so obviously we have to set the a DNS server then only we can access the website right so we will configure that we will set this at the NS server here we can see website or PKA we will get this IP address and for this DNS server here we will give this address then for ipv6 configuration ipv6 dns server so here we can see that ipv6 address so we'll copy this address and we'll paste it here yes now we can see our completion status it's 80 out of 80 now we will try to access these websites from these lines accounting dot PKA coming to manage or a desktop a browser and the here is our URL it's working also we'll try a website PKA yes it's working now we will go to manager be a browser URL website or PKA it's working also we'll try this accounting dot PKA it's working right that's all in this a packet race our activity friends if you have any doubt any suggestions please comment below so stay tuned and we will meet again with the next video thank you

Channel: Tech Acad

Views: 4,846

Keywords: Packet Tracer, CISCO, CCNA, CISCO Certification, CCNA Routing and Switching

Id: viL9tux-jJs

Length: 10min 43sec (643 seconds)

Published: Thu Jun 06 2019