7.4.1.2 Packet Tracer - Skills Integration Challenge

- so welcome to all in this video we are going to see the packet tracer activity skills integration challenge first before coming to her this packet race or activity if you like to get my future uploading video info into our Gmail you can subscribe this channel right now well coming back to our packet tracer activity here we can see the scenario of this activity in this a challenge activity you will finish at the addressing scheme configure routing and implement named access control list coming to our addressing table here we can see some of the IP actress is missing so we have to complete this a crossing table now we will go through the requirements here a divided one seven 2.16 door to one twenty eight dot zero slash nineteen into two equal subnets of for use on branch as same the last usable actress of the second subnet to the gigabit eternal 0/0 interface i say in the last use of lectures of the fastest subnet to the gigabit ethernet 0/1 interface then document actress in that row singh table also configure branch with the appropriate addressing so this is what we are going to do first coming towards projector here we can see the IP address given one seven 2.16 door to one twenty eight dot zero slash nineteen so we have to divide these network actress into two equal subnets for our branch here i given the broadcast actress also for this network of trust that is one seven 2.16 door two one five 9.25 five so here we can see the changes in the third actor to 128 and 159 that means here we get the total 32 actress i mean in the third octet here we can see two equal subnet so for this actress to 1 1 7 2.16 door to one twenty eight dot zero slash twenty till sixteen or two one four 3.25 5/20 coming to submit two we can c-17 2.16 door to the next actress after a 1 4 3 that is 1 4 4.0 stars 20 til 1 7 2 . 16.2 one five and nine thirty two five five is last 20 now we are going to assign the last usable address of the second subnet to the gigabit the third 0/0 interface' for this device branch here we can see the broadcast address of subnet 2 that is 1 7 2 . 16.1 59.2 5 5 so here the last usable actress obviously will be 2 5 4 so we will copy this broadcast address and we will update in a road crossing table it's 2 5 4 also we have to update the SATA mask here we can see the prefix a lengthy says last 20 so obviously the subnet mask will be 255.255.255.0 no we are going to assign the last useable actress of the first to submit to the gigabit ethernet 0/1 interface for this device branch here we can see the broadcast actress for these submit to 1 so obviously the last useable actress in this circuit 1 will be 1 for 3.25 for copy disatrous and coming to gigabit authority 0 / 1 in the device branch 2 5 4 also the submit to mask now we are going to configure the device branch coming to see I enable configure terminal before that we will check the running config and here we can see the interface of serials Eurostar's heroes now Roy is configured here we can see that these interfaces that is gigabit eternal 0 / 0 and the Gigabit Ethernet 0 / 1 is not configured also coming to a topology we can see those interfaces here we can see a serial 0/0 star zero Giga with the turn of 0/1 and the gigabit authority of 0/0 and we can see these interfaces are up first of all we will configure the interface a Gigabit Ethernet 0 / 0 we will copy these address of this interface here is that coming to branch CLI configure terminal we have to go to that interface Gigabit Ethernet 0 star 0 and here we are going to set the IP address here is the address and the subnet mask 255.255.255.0 / 1 here we can see the IP address we will copy this address you will go to that interface a Gigabit Ethernet 0 / 1 and we will set the IP address and the subnet mask 255.255.255.0 details for the interface the Gigabit Ethernet 0 / 0 also for the interface the gigabit authority 0 / 1 now we will come to be configured even with appropriate accessing using the first available address of the network to which it is attached document the a crossing in that receipt table coming to the topology here we can see the device b1 so here we are going to assign the first available address for this device b1 also here we can see this device is connected to the interface a Gigabit Ethernet 0/0 in this a device branch coming to our spreadsheet here we can see the interface gigabit eternal 0/0 in this device branch here we can see the actress so this actress will be that default gateway for this device a B 1 so we mean the copy this actress and coming to the device B 1 here we can see here is the default gateway also here we can see we given the IP actual so for this interface from this subnet to here we are going to assign the first available address of the network to which it is attached here we can see that the network address is a 1 4 4.0 so the first available a trust is obviously one for 4.1 so we mean the copy DS actress one for 4.1 and these submit to mask here is that now we will configure this device a be one here we can see that IP address will copy this coming to be one desktop IP configuration subject to mask its a two for 0.0 also the default gateway here we can see that you copy this address here is the default gateway coming to see configure htq and the branch with the routing information protocol version 2 routing according to the following criteria it it ties all three attachment networks do not advertise the link to the Internet configure appropriate interfaces as passive coming to the topology here we can see those routers htq and branch coming to the device hgq here we are not going to edit is that linked to this internet also we are going to set the passive interfaces here Gigabit Ethernet the 0 / 1 & 0 / 0 also in the branch Ikeda with the turrets you know star 0 and the Giga be the third 0 / 1 first of all we will configure on a branch configure terminal router IP version 2 we will let's it passive interface a Gigabit Ethernet 0/0 also we have a Gigabit Ethernet 0 / 1 before coming to the network we will give the command to do show IP route here we will get all 3 at natural network address now we will given it to work here we can see one network address I will copy this so it will be more easy for us and you will be the next network here we can see that this is for the Gigabit Ethernet 0 star 0 what we said and for the serial interface here we can see the network address whether also we hope to give here or no orto summary now we will come to the router HT q CL I enable configure terminal now we'll go to router IP version 2 and we will give a massive interfaces so here we can see those interfaces gigabit eternal 0 / 0 0 / 1 also we are going to give this interface that is serial Siro / 0 / 1 which is going to the internet and see interface a Gigabit Ethernet 0 star 0 passive interface Gigabit Ethernet 0 / 1 passive interface serial 0 / 0 / 1 before giving the network so here we are going to give a show IP route before this we have to give it do so that we can see all the directly at natural networks now we are going to give Network here we can see when I turn 1 7 2.16 dot 0 dot 0 we are going to copy this right now we will go to the next network here we can see 1 7 2.16 dot and 64.0 and if we got one more here 192.168.0.0 also we have to give a no Auto summary coming to D set a default route on heq which directs traffic to CL 0 / 0 / 1 interface here we can see which goes through the internet also redistribute the route to branch coming to hg q CL I exit to here we are going to give IP route 0.0.0.0 space 0 0 0 0 and the interface serial 0 / 0 / 1 also we have to give a default information originated for that we have to go to a router IP default in information originated coming to e design and name the access list HQ server to prevent any computers attached to the Gigabit Ethernet 0/0 interface of the branch router from accessing its EQ server dot PKA all other traffic is permitted configure the access list on the appropriate router a plate to the appropriate interface and in the appropriate direction you are going to design and name the access list named hgq server in this router hgq enable configure terminal IP access list standard hgq server and here we are going to deny this network which is connected to the interface a Gigabit Ethernet 0 star 0 here we can see that so it comes to this subnet - here we can see that network address I am going to copy this address here we are going to deny this network and the viola got a bit so that 0 dot 0 dot 15.2 5:5 and we are going to parameter other traffic permit any now we are going to assign this name the access list to the appropriate interface in this HQ here we can see that interface so that is Gigabit Ethernet 0 / 1 so we have to go to that interface interface a Gigabit Ethernet 0 / 1 & 2 here we are going to give a IP access group at EQ server out coming to yes design and name the access list a branch server to prevent any computers attached to that Gigabit Ethernet 0/0 interface of the HQ router from accessing the branch server all other traffic is permitted configure the access list on the appropriate router applied to the appropriate interface and the appropriate direction here we are going to design this access list in this router branch enable configure terminal IP access list standard branch server deny 1 7 2.16 dot 64.0 and the wildin are bits 0 dot 0 dot 60 3.25 5 so we are going to permit to any now we are going to apply this access lister to the appropriate interface here we can see Gigabit Ethernet 0 / 1 so we have it to exit we have to go to interface' Gigabit Ethernet 0/1 I P Access Group and the name is a branch server oh well that's all so in this a packet tracer on activity we have seen the skills integration challenge here we can see the completion status 60 out of 60 friends if you have any doubt in this packet tracer activity please comment below also if you liked my video give a thump and don't forget to subscribe the channel so that you will get latest uploading video info into our Gmail thank you

Channel: Tech Acad

Views: 64,811

Keywords: Access List

Id: AId9dW0wLMg

Length: 17min 38sec (1058 seconds)

Published: Sat Mar 10 2018