John Deere 560m net wrap system

Video Statistics and Information

Video
Captions Word Cloud
Reddit Comments
Captions
all right so we're on the 560 M John Deere round baler right now on the net wrap system here is a same linear actuator it's not near as long as that vermeer one same same basic design though it's going to run through it just a series of linkages basically what this is going to be tied to is a bar going across we'll look at that here shortly this one is actually going to be controlling our basically dragging our net wrap down but you actually cut it this little switch though where it's actually you can see that there's a little paddle inside and when the net wrap is not actually going if it doesn't see it do that it's gonna say we're not feeding if it stays down like that we actually just heard the alarm go off that was saying that our net wrap is still engaged it still has tension there so basically that's something to be looking at as well here we got our spring tension pushing our roller down you guys we'll go through that in the operators manual as well through a test so the difference but this one is we've come to the other side while I'm she right back here so we actually have a stainless steel roller down here down below and we have a rubber coated roller up on top and this one's actually going to be driven off a belt system and literally spit the net wrap into the belts to get it to deliver the only problem with it works and it's not that great of a system they pretty much worked all the bugs out but it still has some problems when you're applying net wrap it's a timed event they're not watching the counts like the Vermeer is the Massey the the New Holland we're literally just going for certain amount of seconds that we're gonna apply net wrap when it kicks it onto the bail you'll see it it kind of balls up and then it grabs it and goes where everybody else is applying it very nicely these guys waste a little more net wrap with this system it works they've ran it for over 20 years now so they're not probably not gonna go away from it too fast on this side our main components here we got our tension for our drum or for our top roller again okay the same that linkage arm that was on the other side comes across then this shaft here so when it actually extends it's gonna prove its gonna throw this bearing up and actually tension our belt okay and at the same time it's gonna release our brakes so they're using this strap basically to brake on that drum much like inside of a transmission they're using brakes like that as well so it's going to release that and then it's going to kick that down once or once our net wrap is in and it's actually going to remove out tension our brake pad again and then keep that net wrap tight until it ties so now it will actually engage so go ahead and wrap the cycle so there we tighten up we're loose on our brake pad okay now we're tight so it's gonna be rolling so that beep that you hear is it doesn't sense that it's feeding it did not kick that little flap down so it knows something went wrong it's through an error code we'll be looking at that later so basically the one thing to check on this system a lot is this brake this is actually the new style the old ones actually had a little rubber pad that just kind of mashed down on that drum that was a lot of problems and then back in here if you look you can see where it's actually driven off that roller there's a pulley down there that belt can wear out too and caused some headaches as well so typically if you're having any kind of problem it's typically a belt or a brake issue or one of these Springs just might not be in the right adjustment so the other thing too with this rubber roll it is pretty pliable actually but if there's any cuts or nicks on that it can be a big issue and the same with our our stainless steel roller down below if there's any Mars or scratches anything that can grab that net wrap especially if we start building our net wrap up on top of there we can have a lot of problems so our net wrap literally sits right on top of here case so this stainless steel pad there's three of them that's actually gonna keep our net wrap from rubbing up against the paint our roller is gonna literally hold it there like that so it's gonna literally write right on top of that roller all the time so write wrong or different that's how they do it so it knows no extra rollers that has to go through to keep us stretched out so that is one downfall that we can see their song
Info
Channel: MSU-Northern OTLE
Views: 2,087
Rating: 4.3333335 out of 5
Keywords:
Id: rfSXGotZ0s8
Channel Id: undefined
Length: 5min 14sec (314 seconds)
Published: Wed Mar 25 2020
Related Videos
Note
Please note that this website is currently a work in progress! Lots of interesting data and statistics to come.