How to Properly Load Net Wrap

to thread it up you all know about the dark green stripes on the role in that right the rightest dark green stripes always go to the right okay that way when you thread it up it's going to be coming off the Roll the right way and will work in the paper all right pull you off enough net from the role that you see it's coming on full width to the role this outside string on each it is coming with you so pull a little bit off take that drop it down between the frame and the rubber roll like that okay get a hold that tail flip the cradle up put the net in the home position give that a little tug to take any slack out of the net of the roll get your hand up here kind of close to the rubber roll and the steel roll and rope it over itself roll it over a couple times like you're making a piece of rope take your thumb push that right up in between the rubber and still roll reach over here and grab your brake handle we're going to write to that handle four strokes one two and every time I move that handle those rolls are turning just a little tiny bit three four lock it on the fourth take your pocket knife cut that tail off down about an inch away from the rubber roll down and away close the lid you're ready to bail Hey

Channel: SunSouth John Deere

Views: 25,637

Rating: 4.652174 out of 5

Keywords: SunSouth, John Deere, Tama USA, Agriculture, Hay Season, Net Wrap, B Wrap, Haylage, Hay, Baler

Id: RO6o73SsVZA

Length: 1min 21sec (81 seconds)

Published: Tue Feb 27 2018