Net Wrap installation from Meade Tractor

and all it does is its lay down our cows in bars is I hang out the bottom shut up grab the rest I like to do a little twist to it makes it easier to feed in there look right here put it between us matter on this rubber roll i plate my hanger on with our gansta take this break love it tug on it make sure we'll pull out I always like to cut tail off never cut against these two rollers especially the rubber you can still scratch this one it's using AWS bad you sand it down a little bit if you cut that roll that rubber roller it's going to catch them that really but you're always going to have a sample or spot in there it's really hard to get out and then it's going to get worse over time eventually you'll have to replace that roller it a wrap up in there and they'll go to cut another one off and they'll just cut that play on pieces just be real careful when you're against that roller and that's all or is it loaded in there grab t-shirts in there you brakes back on your actuators on this side it opens and closes system that's hanging once it falls through those rollers are hanging the dirt gets right down there and get some nice here release that and send it right to the sitting right there on the belts when it releases that when it goes to tie the belt to grab it and pull it in and when that action works back at the ploy and get some nice and cooked that's what automated system very very simple you've got your biggest adjustments is going to be on your break here there's adjustment right here for pressure get this rubber break against that pulley and then you've got roll pressure on this side or adjustment over here for the roll pressure there is an X which shows up networking it operates that sway to let them know it's time and operate

Channel: Meade Tractor

Views: 3,258

Rating: 5 out of 5

Keywords:

Id: tUUlo7AQV_0

Length: 2min 24sec (144 seconds)

Published: Fri Jul 21 2017