How to install pole barn roof metal

hey guys this is kevin with green hall buildings right now you guys are watching me punch the roof metal i go through and mark it with my tape measure two foot on center that's the way my purlins on the roof system is laid out and this way you have zero misses when everybody is screwing the rift metal on right now we are installing our three inch white vinyl back fiberglass insulation before the metal goes on this installation is heavy so it lays down really well and we'll go ahead and install it all before the metal goes on this insulation has an r10 value in my opinion it's some of the best insulation you can use on a post frame building a lot of the builders in our area like to use double bubble insulation when it's only meant for condensation control that's my opinion though when a customer asks to have their building insulated it should be insulated so this three inch fiberglass insulation is the only type i offer other than spray foam we do spray foam as well which is another good way to insulate your post frame building i'll get into that on another video now we are installing the roof metal our metal is 26 gauge steel with 40 year warranty if you remember those punch holes i made for the screws this is where we start filling them all in as i line up the edge charles is up on top screwing down the lap first then working across down the whole sheet making sure he fills all the holes in again having the metal pre-punch ensures there are zero misses and the screws are in a perfectly straight line here is both sides finished with ridge cap and rake trim installed thank you everyone for watching and i hope you enjoyed this video

Channel: Greenhaw Buildings

Views: 75,056

Keywords:

Id: kd5kuseR9vQ

Length: 3min 0sec (180 seconds)

Published: Thu Dec 03 2020