Flipper Zero - Cloning NFC, RFID, Key Fob, and IR Signal

today we are going to talk about the flipper zero what this guy can do with rfids NFC remote controls and things like that let's start I have a lock and as you can see for this lock I have an ID card now this is not RFID specifically 125 khz but this is 1356 MHz let me first connect the flipper zero to a computer so you can see what's going on on the screen okay The Flipper Zer right now has the extreme firmware it's a custom firmware it's not official firmware but you know modified firmware and I like this firmware I I have the additional modules for this firmware but today we are going to clone this RFID which is specifically compatible with the NFC we are going to use NFC app and for that I'm going to go into NFC and I'm going to see use the read but before that let's see if it works okay as you can see this works right so I'm going to lock this again and then I'm going to do read and as you can see this card was copied this specific card is meair classic 1K and this one is compatible with the NFC so you cannot use RFID 125 khz app from Flipper zero to clone this card now let's emulate the card and see what we can do we do more and emulate that's it that's how easy it is to clone these specific cards I also have 125 khz rfids and for this I have to use the RFID application from Super zero I cannot clone these cards using the same nft app I'm going to show you that it's not possible to use NFC app to clone I'm in NFC and I'm going to do read and as you can see nothing is happening because this specific card is not NFC compatible it's not 1356 MHz it's 125 khz so let's exit from here and use RFID app and then do read and wait wait okay it is clone now let's see if I can open with this card emulate and of course you can open it by the way you can also save these information the one I just cloned copied I should say I can write it or save it or emulate if I save it I can come back later on anytime even after rebooting The Flipper zero open this saved file for example I'll go save and I can again emulate it and this is how easy it is to clone the RFID cards as well now this car this tag is a little bit different than this one this one I think it's a master that's why it's beeping so much so if you use this one it doesn't keep that much right but what we can do is we can also copy this one and let's go to read of course and then we can clone not clone emulate this one too you see okay so we were able to clone RFID cards working on 125 khz we also were able to clone NFC compatible R ID cards and now let's clone the infrared and looks like here's the infrared receiver and let's see what we can do with the remote control if you press on it's on off it's off right and now let's see what we can do with the infrared let's go into infrared application let's try and learn the new remote so for that we go into learn new remote press the middle button the center button and we aim just like on the picture and we say on and as you can see this was recognized now I can save this and I will save this I named it led on now I can press right arrow and add additional buttons which I can learn again and and I'm going to let it learn off button now let's save this one too and now as you can see I have led on and led off right so now instead of using this remote control what I can do here is this you see it works and led off now for that to work you have to aim that so for example if I do if I turn this around and I'll aim my wall it probably won't work you see it doesn't well it it's kind of work not as good as you know for example if I do this it doesn't work right but let me show you this if I use Blaster infrared blaster which I bought recently this is handmade actually the guy who sells that he actually madees it by his own hand and he was very helpful when I had to order this one so now let's change it to the exteral so this one is very powerful I tested this and it works even through the uh through the T t-shir or for far far away and let me show you how it works I go into learn saved remotes three and I don't have to aim that you remember this infr receiver is on on the other side and I'm going to do the other side and check this out it works you don't need to aim that it's so powerful it's so it just works look look on off it's it's very very powerful it actually has seven infrared LEDs I don't know do you call it led on if I don't remember but it's very powerful it's it's so powerful I didn't test how far it can go but definitely it works on entire my home like even if I I'm going to you know I'm going to test this I'm going to put this on my I don't know car and I'll go far away and see how it works nothing this we though but again this Blaster infrared blaster is very very powerful I'm going to put the link of this module under the description now let's do next thing we already played with the infrared and RFID and NFC cards now let's do the remote control now this is the relay this is 5vt relay but the entire thing works on 12 volt so this P this cable goes into my 12 volt batteries which I have a home it's not a car battery but it's still 12vt and then connected this to the cigar lighting socket to to supply 12vt now I can click I can press the on button and you can see it acts right it it does something and turn off now what I can do is I can actually copy this button pressure by going into sub gigahertz here and I do read and then I'm going to change the frequency to you know what let's do Hing because I don't know which frequency is that okay this is on and this is off you know what it was 433 mahz so I'm just going to change that to that one so let's do let's dis hoping and do 400 33 I think that should be enough okay let's do on and let's do off H let's try again on and off okay now I can emulate this the first one is someone is pressing around there are some remote controls around me now let's emulate the first one because remember first one is for my relay and I'm going to click Send and it is on now I'm going to send the second one which is turn off okay save it and then save it too okay we cloned everything what we had now let's it's time to clone the remote control key fobs like this okay uh this is the relay that is connected to 12vt and if I press on it enables the relay and if I press off it disables it actually I don't need to aim that it just works now let's copy this remote control I'm going to go into sub gigahertz and I'm going to do read and on okay this is copied and now let's save it now let's copy the off button save it now let's try and emulate this remote control we're going to saved on off let's do on first emulate and you have to press the center button again to actually send the signal and it works now let's do off which is this one again open it go into emulate and press center button to emulate that and it works again so as you can see these remote controls can be also copied now if you have the remote control like this for example I've seen businesses they they use something similar to lock the door temporary uh at at home or at business and by just clicking this they they unlock the door don't do that please it's very easy to copy unless you use the more expensive version of the remote controls that nowadays use the rolling calls this is very easy to copy so the stores who use this or businesses just to lock the door after 6 7 8:00 p.m. and then unlock everyone has the key to unlock it and enter without the key right bad idea really bad idea because it's really easy to copy this and if you have something like this it's even easier to copy you can be very far away you don't have to be close to the key file so be mindful don't do that but uh yeah for today this is it uh I'll probably make videos about the flipper zero in the future not probably I definitely will do I'm going to start using this in my small projects and uh I'll I'll be making videos about it this is it for now if you like the video or you want to see my future videos don't forget to subscribe to my channel if you like the video click the like button that will help me because this is a brand new channel you know I need subscribers likes and things like that and again if you want to be notified on the new video click the ring bell next to the Subscribe button this is it for now for today thanks for watching have a wonderful day night or whatever time it is at your time zone right now

Channel: IT Solutions Network

Views: 21,117

Keywords: t5577, rfid, cloning rfid, clone rfid, how to clone rfid, flipper zero, flipper, hacking, hack, cloning, cards, funny, cool, security, cybersecurity, how to, tutorial, nfc card, copy rfid, rfid cloning, 5577, magic card, magic, nfcmagic, lfrfid, 125khz, 125khz rfid, tech, cool tech, hacking device, hacker, unleashed, roguemaster, xtreme, zero, top tech, how to hack, how to clone, how to copy, nfc magic, rfid magic, guide, interesting, copy, copying, extreme, ethical hacking, pentest, computer, card, memes

Id: vSKjnWK7j-E

Length: 14min 19sec (859 seconds)

Published: Fri Jan 26 2024