EXPOL DIY Garage Door Insulation Kit

[Music] the x-bowl diy garage door insulation kit is a simple and cost-effective way to improve the insulation value of your garage making it warmer in winter and cooler in summer designed for sectional garage doors one pack does a single garage door two packs required for a double door you'll need to have the following tools to complete the job a sharpie marker a steel rule stanley knife or something similar tape measure and glue cartridge gun the pack includes eight polystyrene and plastic cover panels and a tube of glue to fix any loose panels to the door the kit is available in two panel thicknesses 28 millimeters and 35 millimeters to see what size you need simply measure your panel width like this measure vertically and horizontally the first stall section to be installed make sure you measure all the panels as dimensions can change mark out the polystyrene panel and cut simply extend the knife blade and cut entering the polystyrene halfway up the blade applying a consistent pressure use the offcuts to make inserts if you have hidden vertical cavities skip this step if there are no hidden cavities in your door or they can be recycled in x-bowl polystyrene recycling cubes in selected hardware stores nationwide install the captor size polystyrene panels now mark out in plastic door liners measure vertically and horizontally the door section to be installed the vertical measurement will need to be 10 to 15 millimeters higher so that it will allow you to bend the liner down and tuck up under the top lip now mark out in plastic door liners a neat cut is required to achieve a professional finish you're now ready to install the plastic door liners repeat the steps until your door is finished and there you have it now you have a fully insulated garage door for more information check out xball.co.nz

Channel: ExpolLtd

Views: 4,213

Rating: 5 out of 5

Keywords:

Id: esDyQGIzVus

Length: 2min 8sec (128 seconds)

Published: Tue Feb 02 2021