Configuring RIP (Routing Information Protocol) Packet Tracer | BScIT MCA Practical

hello guys is in the wind ready so today we'll talk about our IP configuration using Cisco packet tracer so for this let me design our network we'll take one machine here and second machine let's place this here now to connect these two machines again this these two machines will also to two different network so this machine belongs to a network called as one ninety two dot one sixty eight dot one dot zero and this machine belongs to a network one ninety two dot one sixty eight dot 2.0 so what I need is I need to connect this to machine so let me take a switch here so that I can in future I can connect multiple machines so let me take a switch here and I will take one more switch at this point now to connect this I need to go out so let me take a generic router here and this genrika out oh yeah it's generator out here so what I have is I have this network as 1.0 this network as 2.0 so let me just mention this so this network is one ninety two dot one sixty eight dot one dot zero and this network one ninety two dot one sixty eight dot 2.0 now to connect this we need a wire so on this machine to this machine and from from this machine to this machine okay and to connect now from this machine to this switch and here we go now I need to connect these two routers also right so we have to connect these two routers now what I need is I need to configure this network for this dog for this router for this network and this router for this network right now whenever you configure this you have to configure your machines first right again we are not going for any dynamic IP we will be using some static IP only so index table go to IP configuration and here the Machine IP will be 180 mm 168 of 1.2 this is your mask and Gateway is one a two dot one sixty eight dot one dot one now close this machine give into the same configuration for this machine desktop IP configuration and 1 e 2 dot one sixty eight dot 1000 us 1.1 it's not 2.2 and gateway is 182 201 ninety two dot one sixty eight dot one no its 2.1 okay now now we have to configure this point and this point so go to this router configuration and in fast ethernet you have to provide it default gateway light so it's funny to do dot one sixty eight dot one dot one and this is your mask and on in this router you can do the same thing configuration fast ethernet your gateways money to do dot one sixty eight dot 12.1 and you have to say on now the routers are configured right again we have to configure this link also now this is one network this is second network and between two routers I have one more network and this network let me define it as oh ten door zero dot 0 dot 0 this is my network here ok so this point will give as 10.10 dot dot - this is 10.10 dollar 3 so go to this router and with your serial port because the again your when you configure come to this wire you can see this is your clock and we don't have a clock here so this is your DC e and this is your DTE so go to this router when you set your serial 2/0 you have to concentrate we have a clock there right so let me set up clock as 64,000 so you can take any number so let me give an IP as one at n dot 10.0 r2 and this is your mask and on now this port is on now you have to on this port so come here and not wash it on you see see this serial port again in this side we don't have a clock so we have just set theta as not set and then dot 10 dot 0 dot at that side we have to this side we have to the and then you have to say on now your routers are totally configured right now what we need is when I when I pick a packet from this router so from this machine to router it's working right it's because this router knows about this machine all we can say this machine knows about this router what if if I take my packet from this machine to this machine it gives me failed it's because this machine knows about this router or this router knows about this router but this router don't know anything about this machine or this network so we have to teach we have to teach this router how to get to that machine and for this we can either use static routing or we can use our IP again for static I have have already have a video on YouTube on my channel so if you want to go for static now this time we are going for our IP okay so our IP is routing information protocol in which you just have to mention you just have to mention the number of network this router knows so this router knows about this network and this network so just type here the network so it's one ninety two dot one sixty eight dot one dot zero are going to do this we have we have commands the commands are the outer our IP again you can do it using conjugation mode or GA CLI mode so with configuration mode its router our IP and in that we have to mention the network address so add and we need one movie we know one more network is 10.0.0.0 and then we have to say add ok now this is this router is we have mentioned the our IP protocol here again next thing is so you have to go to configuration and in setting you just have to save this in nvram okay so nvm is non-volatile plan in which you can save your configuration and you have to say close now I have to do the same thing for this router so you can use a config or you can use a line so this time will be will be UCLA you have to come to the global configuration mode this is your configuration mode and this the command is router our IP and now you have to mention the network address so this router knows about 180 over one sixty eight dot 2.0 and network we it knows over to network so 10.0.0.0 and that's it and to save go to configuration settings and save okay and this is also configure this is also we have done the protocol for this router also now to check if it is working or not pick up packet from this machine to this machine it comes fail you have to wait for 10 seconds against which will take some time router will take some time again we are working with our IP which updates it tables after every 25 seconds ok so till then we can check for this router this should be connected because obviously we are the IT content them what our focus is my focus is to drop a packet from this machine to this machine and it's working right again you can check the same thing using simulation so using simulation what we did do is pick a packet from this so this machine to this machine and you can run capture forward so capture forward capture forward and capture forward capture forward and all right so this is how you have to work with your our IP and I hope you learn something from it now if you have any doubts please comment also that I can solve your doubts and do subscribe for further videos

Channel: Navin Reddy

Views: 438,131

Keywords: MCA, Master Of Science In Information Technology (Degree), Bachelor Of Science In Information Technology (Organization), Packet Tracer, Rip, Practicals, Routing Information Protocol (Protocol)

Id: krM9GprN6qA

Length: 8min 48sec (528 seconds)

Published: Thu Mar 13 2014