How to configure EIGRP in Cisco Packet Tracer

Video Statistics and Information

Video
Captions Word Cloud
Reddit Comments
Captions
hello and welcome to in this lesson and my name is deepak Bari I will be instructor in this video and we will configure how to configure di geography so take two routers and the series - a double one like this and take two switches domain v 0t and couple of end devices of the leg that WI c1t interferes and turn on this router switch and BA this air drag and draw sleeve it process now it's time to cabling now we already know that router to router connected with real cable so we will connect with this serial cable select the CL cable and click on the router icon and you can see that serial 0 y 0 y 0 and click on this swing and stay Mia and water to switch this will connect to straight through cable now hold on the control key and click here for multiple selection select Fast Ethernet 0 y 0 and a 0 y1 say length s respectively and Savior then after the completion of cabling now we are labeling the our network and for our advantages and to understand how the network will work and what I get this will work here so we will assign here IP addresses one piece for our advantages purposes only and this is Network 10 and slash 24 mince is a CIDR value this means which will describe how many subnets I will use in my class 10.2 foreign devices and this device will get 10.3 IP address and this network will Patti 2.0 so the default gateway routing default gateway address well big 30.1 and then it will default 24 and give the IP address here 30.2 foreign devices and 30.3 for another now the next step is assigning the IP address in all interfaces and devices so we'll start with here and click on the icon for going to the CLI mode and follow the following commands first of all you will type and now we will configure all manually and now for going to the configuration mode over configuration mode you need to give the key name enable then go to the terminal which is come on configure terminal and select the interface fastethernet 0/0 so insert a or enter phase posh with on it utilizing Co by with your means the first it's got number and second one is part number then hit the enter key or return key and get the IP address there one ninety two dot one sixty eight dot 10.1 and switched on t4 means plus C by default subnet mask is 225 dot dot 2002 5.2 25.0 and it enter and you can see the port level is down so you need to will dis come on or change the state of the port you can see here changed it work now fast it and it is up and you can see here in Gardez hongbin's we are successfully changed our Ethernet state now select the interface student left exit commandeer and interface serial 0 y 0 y 0 and assign their IP address 192 dot 168 or 20.1 and subnet mask and you can see a small flock symbol you can see and this means this is the DTE portion of the Tartar so you need to assign the here clock date I will assign one to it triple zero and get this command for changing the state of the port north down and simply is it from this mode and potting running concrete to start a conflict so we will configure another load with the same configuration with some different parameters so no I never figured pendulum and select the interface which you want to walk with and I will go to select interface fastethernet 0/0 and get their IP address one ninety two dot one sixty eight dot e dot one and subnet mask by default is 225 225 225 dot zero and by its command you already know that this will change the state of interface selected interface which way walk yeah take this from here and now select the serial interface with this command interface serial and provides thereby view and give the IP address one ninety two dot one sixty eight dot 20.2 and subnet mask default and you need to define your IP address and after the signing their cat is then change the port state with north and um c'mon and it'd be there for saving your configuration into in the body running conflict to start up country this is safe and this is the last stage when we assign the our protocol here is ERP now go to the enable global configuration mode and type here configure terminal and take a router EA e RP and the autonomous system of the ERG our decision with let us we are walking in autonomous system team and here you will assign your connected network just like 192 dot 168 or 10.0 and subnet mask to define to your IP whether the class lives are +4 so if you are using class full I here just say you need you don't need to ensure the subnet mask if you use the class which I fear face so you need to define here and some extra come out like know what assembly for stopping the node Auto summarization but go ahead and include the second one which is 192 dot one sixty eight dot 20.0 and the subnet mask ok and press the ctrl J key for completely exit to the global configuration mode right here say into your morning with this command and same we will done this here you get terminal okay then router e IG RP then the autonomous system and network 192 dot 168 a 20.0 wait a net mask and you can see the new atoms in never table is filled it up and dual interchange and five second it will be taken to the routing updates and we will include all the network which is connected to the router and we include the next one is network one ninety two dot one sixty eight dot 30.0 and the subnet mask of this network and you can see that the new identity table is now connected with this your neighbor topology table and Phillip Condor who is the control the key and save in here running memory or the end part you need to assign the IP address into the end devices so you need to oh yeah and give the default order cell list and after the you pressing the key the subnet mask will there will default to 55.0 then you do not need to add it here and you just wrote with the down and leave the default IP address is 10.1 which is the interface IP address of the router and if it here same as second in devices and period with 10.3 there then 10.1 then same here this network is 30 and the client I cleared with h2 and lead the subnet mask every default and gave a default gateway 30.1 and savior but the al different array of three anti got one now we will check whether our network is running properly or not so we will going to the command prompt and type a ping and the first time the arc is taking so request timeout then you you will see that reply messages will appear author then you will get the success message based from ping or you can use these messages this success so BP do or if you PD you you can use for this successful message chicken or error checking in this topology table
Info
Channel: Dipak Bari
Views: 181,806
Rating: 4.6638656 out of 5
Keywords: eigrp configuration in packet tracer, eigrp configuration, eigrp, eigrp routing protocol tutorial, cisco packet tracer tutorial, eigrp explained, eigrp protocol, eigrp ccna, eigrp cisco packet tracer, eigrp complete tutorial, eigrp concept, eigrp configuration on packet tracer, dynamic routing eigrp configuration in packet tracer, eigrp configuration on cisco route, ccna, how to configure eigrp in packet tracer, routing protocol, cisco, packet tracer, dynamic routing eigrp
Id: Np_VuQeLS44
Channel Id: undefined
Length: 15min 21sec (921 seconds)
Published: Sun Sep 04 2016
Related Videos
Note
Please note that this website is currently a work in progress! Lots of interesting data and statistics to come.