Hey guys, what's up. My name is Serge, and if you're
new here, welcome to my channel. I'm a firm believer that everyone
has an interesting story to tell, and I'm here to help you
with the visual aspect of it, by helping you make better videos. Today, we're going to learn how to
add the animated split-screen effect, seen at the start of this video. If you subscribe to my channel, there's a good chance you know that
I did a similar video last summer. People really seemed to enjoy it, but I only showed how to
add the split-screen effect. I got a ton of comments
asking for a follow-up video to show you how I animated
my clips onto the screen. So, this time around, besides showing you how to
add the split-screen effect, I'll show you how you can
animate it at the same time. Let's jump into Final Cut Pro and get started. Select your first clip, and
drop it down into your timeline. The way we achieve this split-screen
effect, is by using the crop tool. You could just crop the clip itself, but I strongly recommend
using an adjustment layer. I'll show you why in a bit. For now, if you don't have an adjustment layer, click the link in the video description to
go to my website and download one for free. Once the adjustment layer is installed, select it in your titles browser, and add it above your clip. Ripple trim it to the same length as your clip. Move your playhead to where you
want your second clip to come in, and with the adjustment layer clip selected, select the crop tool, and add a keyframe. Move your playhead about 20 frames ahead, and use the crop controls in the inspector
to crop off the right half of your clip. My project is HD, so 1920 pixels wide. To crop off half of that, click on the number beside the right slider, and enter half of 1920, which is 960. Click done. Using the crop tool on the adjustment layer, instead of the clip itself, allows us to re-frame the clip inside
this half of the split-screen window. First, with the adjustment layer still selected, press Control V to bring
up the video animation menu to see where your keyframes are. Place your playhead on the first set of keyframes, select the video clip, switch to the transform tool, and add a keyframe. Move to the second set of keyframes, and use the on-screen controls
to re-frame your clip. Right-click on each control point in the viewer, and switch the movement
type from Smooth to Linear. Here's what we have so far. Before adding the second clip, move your playhead to the first set of keyframes, command-click both clips to select them both, and combine them into a compound clip with the keyboard shortcut Option G. With your playhead still in the same spot, select your second clip, and add it to your timeline. Add an adjustment layer above this clip and ripple trim it to the same length as the clip. Move your playhead to the
start of this set of clips, select the adjustment layer,
and bring up the crop tool. This clip will come in from
the right, so to start, we want to crop off the entire clip. If your project is HD, type in
1920 for the left crop value. Add a keyframe here. Move your playhead 20 frames ahead, and set the left crop value to
half that again, which is 960. Select your video clip, and use the transform tool to re-frame it. We don't have to worry about any keyframes here. Click done, and combine these two into a compound
clip to reveal the clip underneath. Move your playhead to where you
want your following clip to come in, add your clip to your timeline, and add an adjustment layer above it. This one here, we'll have come in from the top, so select your adjustment layer, and crop off the entire clip from the bottom. Add a keyframe. Move your playhead 20 frames ahead, and set your bottom crop value to
half of your vertical resolution, so in our case, 540. Combine these two into a compound clip. To compensate for our top clip, we now need to adjust the crop amount and the framing of our bottom clips. Set your playhead at the start of your top clip, and double click on the bottom
compound clip to go into it. Without moving the playhead, select the adjustment layer and add a keyframe to all your crop parameters. Select your video clip, and add keyframes to all the transform parameters. Hold down the Shift key, and press the right arrow key twice to move your playhead forward 20 frames. With the adjustment layer selected, crop off the top half of your clip. Select your video clip, and use the transform tool to
resize and re-frame your video clip. Right-click on each control point in the viewer, and once again, switch the motion type to Linear. Click done, and press the back arrow under the viewer
window to go back to your timeline. Move your playhead back to
the start of your top clip, and repeat the same steps for your middle clip. Here's what we have so far. Next, we're going to add some borders
between our clips to separate them, but before we do, I'd like to take a minute to talk
about the sponsor of this video, Envato Elements. Envato Elements is a
must-have subscription service for any type of creator. For a low monthly fee, you get unlimited downloads of stock footage, royalty-free music & sound effects, graphic templates, video
templates, and so much more. Whether you're making YouTube videos, podcasts, designing websites,
or any type of creative work, Envato Elements is guaranteed to have
something to improve your next project. For example, in this video, all these beautiful demo clips, the background music, and all the sound effects were all
downloaded from Envato Elements. All for one low monthly fee. And if you get an annual subscription, you can have everything
Envato Elements has to offer for half price! Trust me, it's worth it! Now, back to Final Cut Pro. To add a bit of separation between
the clips in our split-screen effect, we can use the crop tool to
add dividers between our clips, and a border around the entire image. First, let's animate in a border around our image. Double click the bottom clip
to go into the compound clip. Select the adjustment layer, and press Control V to show
where your keyframes are. Move your playhead to the first keyframe, hold down the shift key, and press the left arrow key to go back 10 frames. Select the crop tool, and add a keyframe here. Move your playhead ahead 10 frames, and crop each side of your image by 30 pixels to add a border all the way around your frame. Move your playhead to the next keyframe, and change the left, top, and
bottom crop value to 30 again. The right crop parameter, the one we used for our plot screen effect, is slightly different. Since this divider is between two clips, we only need half the width
of our border, which is 15. Take the number you have here, and add another 15 pixels to it. Repeat these steps for the rest of your keyframes, croping the outside edges
of your clip by 30 pixels, and the edges between clips by 15. Click done, and go back to your timeline. Double click your next clip
to go into the compound clip, and repeat the same steps. Select the adjustment layer, Control V to show your video animation keyframes, and change the right, top,
and bottom crop values to 30. Move to the next keyframe, change the outside edge crop values to 30, and add 15 to the edges between clips. Repeat this for all your keyframes, and do the same to your top clip. And last, since these borders
and dividers are transparent, if you want a different color, all you need to do is go
to your generators browser, select the Solids category, and add a custom generator under your timeline. Ripple trim it so it's the
same length as your clips, and change the color of it
in the Generators inspector. Here's our finished result. I only used three clips for this demo, but you can keep going and
add as many clips as you need using the same steps. Just have to do a bit of
math for your crop values. Thanks for watching, and I'll see you back here next week.
