8.3.1.2 Packet Tracer - Skills Integration Challenge

hi friends welcome tour in this video we are going to see the packet tracer our activity skills integration challenge from before coming to this a packet tracer activity if you like to get my future uploading video info into our mail we can subscribe this channel right now well here we can see our a trussing table also vielen pot assignments and to dhcp information we will go to the scenario in this the culminating activity you will configure VLANs trunks DHCP server or DHCP relay agent and configure a router as a DHCP client here is our requirements we will do it one by one using the information in the tables Abel implemented the following requirements create VLANs on s2 and assign VLANs to appropriate ports names are case sensitive so here we can see our device s2 here we can see our reveal and put assignments table VLAN number and it's names VLAN 10 VLAN 20 VLAN 30 and million 40 also we can see the ports so first of all we are going to create this VLAN with its name coming to switch s2 enable configure terminal first of all we are going to create a VLAN 10 name as the sales VLAN 20 name is a production within 30 marketing wheel and 40 HR oops you have to give a name yet are correct now we are going to assign the lens to appropriate ports here we can see those ports coming to s2 will go to the interface or range of interfaces a faster toward 0 / 5 till 9 so we are going to give a such a port access level and 10 now we will go to the interface or range if master turn 0/10 till 14 switch port access VLAN 20 now we will go to interface or range of vast eternity row / 15 till 19 such a port access wheel and 30 and finally we have interface range of faster torrent 0/20 till 24 so teapot access VLAN 40 now we are going to verify the valence created and assigned we have will show VLAN brief and here we can see the details or here is a VLAN 10 and we can see the ports 20 and its ports where we can see VLAN 30 and to VLAN 40 coming to the next two requirements configure is two ports for a chunking well coming to a topology here we can see or a device s2 and here we can see the ports which are connecting to the doors who chose s1 and s3 so these ports should be trunking here we can see those ports first return 0 / 1 0 / 2 0 / 3 & 0 / 4 coming to the configuration part configure terminal we have to go to those interfaces using range master turn 0 / a one till 4 & 2 here we are going to give a support mode as a trunk we can verify this at ranking now show interface trunk & 2 here we can see the details here we can see ports and the sports are chunking native VLAN 1 coming to the next to a requirement configure all non trunk ports on s 2 as access ports here we have seen the ports that is faster current 0 / 1 0 / 2 0 / 3 & a 0 / 4 we made us at ranking so all other ports we must make make us access ports coming to the configuration configure terminal we have to go to all those interfaces range if faster third 0 / 5 till 24 and here we are going to give us which report mode as access now we will go to the next 2 requirements configure our one to route between VLANs sub-interface the name should match the VLAN number here we can see our router our run or so here we can see the interfaces have interfaces Gigabit Ethernet 0 / 0 10 0 to 20 0 30 or so 0.40 we can see those interfaces IP address and the subnet mask we are going to configure these details into our device r1 coming to the router r1 CLI enable configure terminal we have to go to the interface a Gigabit Ethernet 0 so our 0.10 and encapsulation dot1q with an ID 10 also we have to set the IP address here is the actress and it's something to moscow here we can see that something to mask its 255.255.255.0 for 255.255.255.0 what command oh this is a sub interface so no need to give this notion on command even we can give for the physical interface if you have it a third and zeros are 0 finally all right so now we will go to the next sub interface that is interface a Gigabit Ethernet co-star 0.20 encapsulation dot1q 20 and to be able to set the IP address or here it is also we have to give it a subject to mask your we can see it's 240 255.255.255.0 now we will go to the next user interface interface a Gigabit Ethernet 0 / 0 dot 30 encapsulation dot1q VLAN ID 30 also we have to set the IP address or we can change the actress that you 1.30 dot one or so the subject to Moscow here we can see it's 128 255.255.255.192 eight coming to the last sub interface interface we got with the thorns 400 / 0.40 encapsulation dot1q 40 also we had to set the IP archers it's a 40.1 on this subject to mask her we can see it's 192 255.255.255.192 now we will go to that interface so that is Gigabit Ethernet zeros now 0 and we will give a no-shit commander so that all this have interface also will be activated here we can see that yes now we will verify these sub interface configuration show running config and so here we can see the details well now we will come to the next requirement configure r1 to act as a DHCP server for the VLANs attached to the - es - right create a DHCP pool for each VLAN and names are a case sensitive here we can see those at the HCP full names well I seen the appropriate addresses it to each a pool configure DHCP to provide the default gateway address configure the DNS server that is to not 9.2 160 5.2 not 1.1 for for each pool prevent the first 10 addresses from each pool from being distributed to anti devices coming to the configuration and your router r1 configure terminal first of all we will exclude the address of a certain IP address we have IP dhcp excluded actress from the first network that is a 10.2 one till the 10.2 10 yes or is that also we have to exclude from the network a 2002 one till late 2010 also we had to exclude or from 30 row to 130 network 32 10 and finally 40 networks till 40 or 10 now we are going to create pools of our each VLAN service it's a needed requirements so your IP dhcp pool so here we are going to give a VLAN and the score at 10 under here we can see the network 10.0 / 27 170 2.31 tour 10.0 also we have to given at work Moscow that is a 255.255.255.0 for also the default router that is 170 2.30 1.2 10.1 also we have to set the DNS server here is the actress now we will create the next DHCP pool IP dhcp pool VLAN underscore a 20 so we are going to give the network oh that is 172 door 31 thought 20.0 also we have a network mask a 255.255.255.0 fault router that is 170 2.31 so 22 to 1 and we have already in a server a truss your is that coming to the next to DHCP pool IP dhcp fool we have wheel and underscore or 30 network of 170 2.30 1.30 dot 0 and we have a subnet mask 255.255.255.0 98 also the default router 170 2.31 thought 30.1 also we have to set the DNS server coming to the last ur DHCP pool IP dhcp pool with an underscore or of 40 Network 172 or 31 tata 40.0 on the network mask 255.255.255.0 then the default router 170 2.31 dot 40.1 and dns server here is the uh trous coming to the next requirement verify that each UPC has and I just our same from the corrected DHCP pull coming to PC one test hope command prompt here we are going to check the IP address where we can see it's not assigned so here we are going to give IP config or renew yes here we got the IP address here we can see that 10.11 subnet mask default gateway also DNS server is so now we will go to PC to IP address is not a saint so we here we will give I P config renew yes we got the address at xx dot 11 here we can see the other all details subnet mask default gateway and DNS server coming to PC truly command prompt IP config IP address is not a saint so here we have to give a renewal here we can see IP address a 30.11.2011 ely coming to pc for no IP address assigned from the dhcp so here we are going to give an IP config renew and here we can see the details IP address for T dot 11 subnet mask default gateway also the DNS server coming to the next to requirement here they given a not DHCP address assignments may take some time click fast forward trying to speed up the process curavi given a renewal option and we got the address for each of pcs coming to the next requirement the configure Arvind as a DHCP client so that it receives an IP extras from the ISP network coming to a topology here we can see the router r1 also here we can see the is B here we are going to configure this r1 as a DHCP client so that this interface Gigabit Ethernet 0 / 1 is going to get the address from this is P coming to the configuration on r1 enable configure terminal we have to go to that interface so that is interface Gigabit Ethernet 0/1 hurry how to give IP address dhcp so that here we can see IEP actress negotiated by a DHCP server also we are going to give a no-shit command here after a while here we can see we are getting a message interface bigger with the torrent 0/1 assigned DHCP actress here we can see that actress or so the mask here we can see that hostname r1 coming to a final or requirement so verify all devices can now ping each other and wlwt's cisco dot PKA right so coming to PC one command prompt to reveal a ping to other pcs PC to PC 3 and a PC for ping 172 or 31 tour 2011 yes we are getting the replay now we will try to 30 dot 11 40 dot 11 we are getting the replay now we will try to ping from these pcs to this server www.score.org people give a pink and the server actress we are getting the replay now we will try from a PC to we are getting the replay coming to PC Troy we are getting the replay and finally PC for we are getting the replay well that's all in this packet race or activity that is a skills integration challenge here we can see completion status is 100 out of hundred runs if you have any doubt in this activity you can comment below also if you like my video give a thump and don't forget to subscribe the channel so that you will get latest uploading video info inform a thank you

Channel: Tech Acad

Views: 49,714

Keywords: Dynamic Host Configuration Protocol

Id: gyhTGWc-EMQ

Length: 20min 26sec (1226 seconds)

Published: Mon Feb 26 2018