Porting predator hemi head part 5

okay so this is part 5 of porting a Hemi predator head and that's pretty much it I've got most of the main material hog doubt this is the exhaust side give you a let you really look at this and see how it's pretty much round I've got most of the gray areas cleaned up it's all try to get into focus it's all bare limb there's a little spot I don't know if you can see right here the tip it really didn't really doesn't really want to clean up but I'm starting to get a little thin right here so I really don't want to take too much more out of it I might try to work a little bit more on this side to try to get it but I mean the main bar is pert pretty good right now it's pretty open so take a look at this this is the exhaust side compare it to the intake side much much more restrictive much more material there's so much material that can be removed for air flow try to get it in the light here a little bit better for you down in here hopefully you can see better again the intake side versus the exhaust side it's pretty much night and day difference I'm gonna do a little bit more work down inside let me try to get down in here down way down in here I'm gonna try to clean up a little bit more let me get my finger in here to point there we go right there I'm gonna try to clean this up a little bit more I want to round this over a little bit more I'm trying to get the air to just no restriction when that many exhaust comes out and flows so I just wanted to have a nice chamfer to flow real smoothly down inside of here sorry my my camera's shaky I'm trying to hold everything by myself get there get some light down in here a little bit better I still got a little bit more I'm going to clean up inside of here but for the most part it's pretty much done I'll go back to it with the scotch-brite pads and really work it in kind of clean up you don't want to smooth it up as glass you want to keep it a little rough but I could still kind of clean it up a little bit more than it is right now so that's it again part of the evolution of my my porting job I hope y'all are enjoying it

Channel: Suburban Homestead Projects

Views: 5,449

Rating: 4.9215684 out of 5

Keywords:

Id: vo7fGGLQ1N0

Length: 2min 34sec (154 seconds)

Published: Wed Dec 20 2017