Pole Barn part 14: Lower insulation and framing almost done

all right here's the Wednesday night update which is probably the last one for the week it's a good time to hang out with friends and play with some cars we're running out of time but it's been a struggle but we've got pretty much the lower end all insulated and see coming all the way around coming in through here and then all the way over to the panel I'm still working on how I'm gonna do cuz I'm gonna have to frame something around the panel since the wall is thicker than I had originally planned and I can't realistically move the panel so I've got that framed but I haven't insulated it yet because I haven't felt like monkey well I'm wires yet but yeah she's uh just getting kind of toasty in here actually it's kind of nice I had to open some doors to work the installations definitely cut the echoing down it is a lot nicer to be in here getting tired getting old but yeah so that's my run it at the bottom of these boards is 42 the bottom of those boards is 87 these are the n87 ones because that's the top of the window for him piss why do that twice so that's my screw surface for the tin when it goes on and then when the treated boards get here there's a 2x4 treated that goes against that 2x6 that's on the bottom you know so it screws to the face of that plate and then that's the nailing surface for the bottom trim rat run or whatever I call that one and once we get the two by tens across the top rafters especially along the edge there we can get the J and trim with the freeze up I know we can start hanging ceiling I just need Paulie and get the board's up and the boards are outside I have them I just it's a long way up there but you know our stack of 2x4 is this dwindling fast so the eight footers so I'm used about half of them already and then the 10 footers are still protected and we still got to bury that foam has been pretty low priority compared to sealing the building but yeah so that's probably it for a few days just kind of burned out so all right I'll get this posted

Channel: howpeculiar

Views: 12,803

Rating: 4.8709679 out of 5

Keywords:

Id: Pr0MxSbt3XI

Length: 2min 46sec (166 seconds)

Published: Wed Sep 20 2017