New Wifi Dev Board Feature makes Flipper Zero a beast!!! // Pinoy Hacker is really excited!

my personal opinion this is not a Wi-Fi testing tool yet 6 months ago I said on the record that the official Dev Wi-Fi board is not yet readed but fast forward to today and a new feature has been introduced that motivated me to use the Wi-Fi de board once again as you can see I have my flipper zero with the attached Wi-Fi de board okay and if you want to do some wi-fi hacking what we're going to do is go to gpio esp32 Marauder and let's scan for some access point after scanning everything let's go to list make sure we know the number of the access point that we want to haveck and let's go to select and let's select that one so let's go to zero click save and most of the tutorials out there what they want to do is you do a de attack now so what it does is that it disconnects all of the device from the access point or from the Wi-Fi and when it tries to reconnect that is where you capture the handshake that contains the password that you have to the cryp but for this what we're going to do is let's go to sniff and click raw and we'll start sniffing now okay and this is a phone as you can see it is connected to the Wi-Fi and I'm going to use a separate device while this sniffing is happening and let's do it by using High [Music] Checker okay is checking for updates unfortunately it's taking long time okay now all of the access point are there and let's just go to the access point that we want to attack let's click attack and let's click disconnect okay by disconnecting as you can notice the Wi-Fi is um disconnected and let's just stop the attack so that the Wi-Fi will reconnect again oops let's click this and this one should connect okay now that it is connected we should have capture captur certain hand hand shake and all we have to do is to stop the scan and it is now save on the SD card of the Wi-Fi or of The Flipper zero and now we have q flipper here and let's go to the file manager file manager under SD card all of the captures that we have before it will be under apps data maroder and under the folder pups as you can see I have several pups here what I'm going to do is this is the one that we captured earlier and I'm going to right click now download it okay let's just wait and after that we after we have downloaded it let's go to Cali net or Cali Linux this is my Cali Linux box and I am just going to copy and paste it here okay so I already have the EA pole which is the filter that we need to have if we want to check the four part handshake that we are trying to capture and that is the one that we will be using for decoding the password so let's do that and just drag it here by the way this is wire shark this um warning message is very um common so don't worry about it and as you can see we have captured a lot of partial messages now let's check if we get all four and unfortunately on this one we only get one of four and three of4 and this is very common if you trying to attack access point or Wi-Fi with very few devices connecting to it this thing changed the way I see the Wi-Fi Dev board and I got really excited when even Order a case for it now and I have also considered bringing in whenever I just try to observe stuff like the last video that I did when I was doing some grocery shopping and I wouldn't be surprised by the same time next year flipper Z would have implemented most of the functionality of the WiFi Pineapple and you know if you like this video please make sure to check out my other videos here on H Kista TV till next time my fellow h Stu

Channel: Hakista TV (Pinoy Hacker)

Views: 7,858

Keywords: hacking, hacker, pinoy, philippines

Id: Ly4Bxle2CHc

Length: 6min 1sec (361 seconds)

Published: Tue Oct 31 2023