HOW TO MEASURE AND INSTALL MULTI RIB OR ARMOUR RIB METAL ROOFING PART 2

now we need to take the shameless out now we're going to need a panel to cut a panel that goes up boy let's talk about right here at the top we're going to measure that and cut it and we're going to get it back in behind the tube so we're going to take a five foot panel down there this pipe is also got caulking underneath it so this piece goes over the top it's sealed and that's it and then we'll paint hi we got down to the end we've got 26 inches on each side you're going to mark it over 26 inches at the bottom and at the top they're going to chop a line off cut it's going to be flush with the outside of these shingles and sit one side is taken about an hour 15 minutes or so to complete decide that still needs we still need to go back and put screws in it all the way across we've just got our set screws in it but that won't take very long with everybody no mark alarm three inches down the valley okay now this piece right here that they just cut off this piece is going to be saved we're actually that piece right there is going to end up getting used right there we're on the other side of the valley everything to get sudden from here gets flip-flop and cut from there it's a good way to do it where you don't have that much ways to please gonna pull this measurement down from the top all the way to the point which is on the other side of the rib data going to mark that hey you know already mark that to measure every three-foot measure down they've already marked that now they're going to put a chalk line from that point to the other point cut it off hey you need the view take them you

Channel: armourmetals

Views: 1,641,269

Rating: 4.1008644 out of 5

Keywords: olvin munoz, estalin munoz, edwardo sanchez, brian patty

Id: 15dfiTw9sXY

Length: 7min 3sec (423 seconds)

Published: Mon May 11 2009