How to convert a Cisco AP from Lightweight to Autonomous by Khurram Nawaz

this is forum Nellas and today I'm gonna show you how to convert Cisco likely access point to autonomous or standalone access point in order to use the access point without a wireless LAN controller the autonomous image must be installed on the access point Cisco access point have three different type of image available k9w 7 which is autonomous iris and this is what we're gonna use they k9w 8 is the factory installed on mash access point which is full lightweight access point or IRS or CV k9w it lightweight the cover image this is factory installed on lightweight access point unless a mash image is specified so the next step started unfortunately many of the commands you will want to use such as configure terminal will be unavailable our lightweight access point before username is cisco sea capital same password enable cisco configure terminal as you can see here let me show you the words you're ready click ok 9 w 8 so let's get started so first of all I'm gonna turn off my Access Point press and hold the mode button while you reconnect power to the access point hold the mode button until the status LED turns amber takes approximately of five to ten seconds get me more and release the button okay so my access point came back online let's see what we can use your sir mark our food so let's get started here dir flash so first of all I'm going to delete some files of the big flash : yes delete it that's it now I'm gonna set the IP address or one single one 6.10 of one zero zero internment a set at mass to apply to the apply to double 5.0 set D for underwater 17.1 6.1 MacBook 10.4 now TFTP should eyes user initialize that in it right so here's what I'm going to do I have already downloaded are the is image files let me show you really quick so here's the file k9 w 7 I'm just gonna copy file name I've already configured my TFTP server so ours is - extract the FTP called and 172 top-16 or 10.4 mighty FTP server IP address which is it's all on a MacBook / by name that's mentioned enter as you can see I just start downloading file from TFTP log viewer yet anyway I'm I'm gonna pause the video here because it's gonna take a while or once this file finish I will resume the video okay guys as you can see here we just finish uploading so now dir flash just make sure yep okay now we have to write that good make sure it's paid sensitive that Colin or I think to paste / or fake enter to set to see the parameters have right set as you can see here smash don't worry about this oh this is our main focus is on so now you can just write food and it's booting k9w seven after the SS plant dilute we're gonna do something like this now I'm gonna fight and it will be fourth down for Cisco BC capital this is case sensitive awesome configure for me you ain't brave awesome I got the IP address just in case if you didn't why in phase B me one IP address incentive about six of ten dot 82 22,500 5.0 shut down that's it thank you for watching TV this video

Channel: Networking with Khurram Nawaz

Views: 39,734

Keywords: Howto convert cisco AP from Lightweight to Autonomous, Cisco AP, Lightweight, Autonomous, Networking with Khurram Nawaz, Access Point, WLC, Wireless LAN Controller, Lightweight to Autonomous, Cisco, AP

Id: c70mOOpqMsg

Length: 8min 42sec (522 seconds)

Published: Tue Aug 29 2017