HOW TO CONNECT ONKYO RECEIVER PT1

all right this is connecting the Eno and this is the tx- nr515 audio video receiver okay and it is 3D ready and all that good stuff and it does the streaming on Pandora radio if you have the ethernet cable connected in the back all right so and supports 7.2 which is uh seven speakers in the point2 means uh two you can actually have two sub wolfers all right and it has zone two so you can hook up like you know outside speakers like Pool Patio Zone 2 hook up to your speaker switch right there in zone 2 and the arc is ARC Audio return Channel but your TV has to support that on Samsung I think it's HDMI 2 on most TVs HDMI 1 so we hooked up the front speakers we got flush mount speakers which is there there and there the two flush mount speakers in the front and uh we already hooked those up and then to find out where these other ones go here's a little trick I'm going to show you guys how to hook that up this is the FM antenna and this is if you want Internet Radio you have to plug in Ethernet from your router so anyhow to find out where the speakers go can these coming out of the wall right here and uh you put your negative right here and then you touch it with the positive on the battery and then right here basically and you hear that tapping coming out of that back left speaker so you know where to hook it up so you hook it up to the back surround left it's called okay and that's uh pretty much it so we'll hook it up round left you just twist and make sure this is no wider than your thumbnail when you splice the wire off if it's too long it might touch each other and short stuff out see see how it's coming out a little bit right there but it's not enough to touch the positive you want to make sure you don't touch the positive so anyway you put the I put it in here and then after you loosen that knob up you go ahead and it goes right there on the side and then see right there and then you tighten it down clamp it down and you just don't do overtighten it just make it snug so it doesn't and make sure the wires don't hang out on the other side of it so it's touching other stuff all right and then same thing goes for this one you want to make make sure right here you want to test it and that's how you test the speaker so thanks so go ahead and put that right there this is just a doublea battery any regular doublea battery so you know the speaker is working where it's located so we know that one's uh surround right because if you're facing the TV that's the front left that's the front right and the surround left is behind you when if you're sitting on facing the TV uh it's on the back left of you in the back right of you now that we have the front left and front right speaker connected the back left and the back right um connected this is in a 7.2 system so we uh we got these speakers flush M speakers all connected right here um you have any questions yeah what makes a good receiver oh like sh sound yeah and well it's probably it's like a combination of things it's uh basically it's only as good as its weakest slink meaning that if you have good speakers and good receiver and really like crappy speaker wire or bad audio signal going into your receiver then it's not really going to be good sound but if everything in line is uh good quality then you're going to have a good system and good quality and you can hear the difference and right here so we got the K HD cable box which is good the Blu-ray player it's good and you got your um CD changer for I guess your Zone 2 uh pool patio speakers and whatnot so we got all this connected this is the cable so that's going to be connected it's all labeled back here cable and this is the Blu-ray player and that's going to be connected to obviously bd/dvd and this is going out to the TV and this is going to HDMI 2 in the back of the TV which is uh somewhere on the side there I don't if you can see it it's hard to say it's too flushed against the wall but anyway take my word for it all right and the sub woler would be plugged in right here and then the zone 2 is a speaker switch so I'm going to go ahead and connect that stuff right now and this is um the CD changer the CD changer will be plugged into tv/dvd CD I mean and here's the Nintendo Wii Nintendo Wii will be connected right here game right there all right so now we got the TV connected and that TV is connected right here so you plug it into right there and again Arc is a return channel so if you have Netflix on your TV you turn on activate the arc uh feature on your TV and receiver and you'll get that surround sound coming out of the TV that just eliminates the optic the optic in coming out the audio out on your TV going into your receiver if that makes any sense might not just post a comment below I'll answer your question and then this is the Blu-ray the Blu-ray PL gets plugged in here and then this right here is the cable box and I get plugged in right there that's where the cable box plugged in and there Nintendo Wii again and then this is a CD player which is not long enough so we're going to have to get a longer cable and this hooks up to the spe speaker switch because it's the pull patio and bedroom speakers and uh that's pretty much it we're just going to configure the rest of it and we're going to do an auto calibration so it's all all the speakers are balanced

Channel: TampaTec

Views: 878,769

Keywords: HOW TO CONNECT ONKYO, surround sound, PT1, TV, TO, ONKYO, RECEIVER, arc, REVIEW, ARC, SPEAKER, WIRES, TEST

Id: 5qF2P34k7RU

Length: 6min 59sec (419 seconds)

Published: Sun Apr 22 2012