Hacking your doorbell // RF Replay Attack using HackRF One Portapack H2 // Flipper Zero Alternative

hello and welcome to hakista TV and in this video I will be showing you how to identify the frequency of a wireless remote control and do a replay attack using hack rf1 on a portable so let's start the very first thing you're gonna do is go to Looking Glass a Looking Glass is a waterfall representation of a wide range of frequency now I never a signal is being sent on that range you will see a disturbance on the water flow so let's try to do it I'll just click this and try to focus on the waterfall and as you can see there is a disturbance there with the color red signal being sent okay what we're gonna do is if you take a look at this it should be here which is marker and you can just use the wheel to go to that frequency and it's around four to eight four three three okay so it's on that range let's try 433 because that is the most common frequency and let's go to calls so what calls does is it can listen to a specific or much narrower range of frequency now let's go to maybe four three two and click done and maybe Max is four three four and click done now let's try to click there okay just click click this and it is not capturing anything maybe we need to readjust so let's go to four three five no four three two so four three five and let's click it again as you can see it is 433.9875 and that is the one that we will be configuring on the capture part Okay so as you can see another waterfall representation of it and let's go to four three three and maybe let's just put five because it is a range and let's see so there there is some red and that means that we just need to adjust the rate to be something lower like 16k and as you can see there is the red signal that is being said and what we can do is Click record click signal click it again and click it again okay and let's click save as you can see this is 22. and stop okay now in order to replay it let's go and put our trusty doorbell here and open it up go to replay open file and let's go to file 22. which is the last one then make sure that your cursor is on the play button and click play and when we see the red signal you can see this should be playing another one for good measure Okay so that is how you identify frequency and do a replay attack on hack rf1 in a quarterback of course and if you enjoyed this video please check out my other suggested video about hack rf1 here on how he's the TV till next time my fellow hakista

Channel: Hakista TV (Pinoy Hacker)

Views: 7,485

Keywords:

Id: LluOug2B9Uk

Length: 4min 33sec (273 seconds)

Published: Sat Jan 07 2023