Gunsmith Part 6 Task Guide - Patch 0.14 | Escape From Tarkov

Hey guys, this is a task  guide for Gunsmith - Part 6. You can accept this task after  at least 21 hours have passed   since you’ve completed Gunsmith - Part 5. The easiest way to get your basic  AKM is to barter for it at Prapor   LvL1 for 3 small Tushonkas or to buy it  from him once you’ve hit LvL2 with him. Since we will be rebuilding almost the entire gun,   it’s easier if you disassemble it  completely except for the gas tube. We will still need that. You can sell these parts to cover some of the  expenses or to level up a trader of your choice. And now let’s see our shopping list. By far the most expensive part of your build  will be the Fortis Shift tactical foregrip. The task requires this part specifically  so there’s no way of getting around it. You either get it from a raid which is purely down  to luck or you need to buy it one way or another. Getting it off the flea market can be  expensive at the beginning of a wipe. I’m talking hundreds of thousands here by the way. But if you are patient it gets  quite affordable after a while. The other method which I like better is to do the  barter trade for the MPX MQB at Mechanic LvL1. Depending on where we are in a  wipe the total cost is about 150   to 200 grand and it comes with  this foregrip already on it,   not to mention a bunch of other parts that  we can use for later Gunsmith tasks as well. After the foregrip the other strict item we  need to have is the 30-round Magpul magazine. You have two different color versions of this  so get the one that’s cheaper at the time. For the suppressor I like to use  the SilencerCo Hybrid 46 because   it’s less punishing on ergonomics  than the Rotor 43 for example. Don’t buy it from the flea market  though as it’s pretty expensive there. Go to Mechanic LvL2 instead and  barter for it for 4 RAM sticks. While you are here, pick up the thread adapter for   the suppressor and the cheaper  SAW-style pistol grip as well. Skier is our next stop and from LvL1 you can  get the AKdemia Bastion dust cover from him. The rest of the stuff we need to finish our  build are available from him after LvL2. Buy the Zenit PT Lock, the PT-1 “Klassika”  stock and the AKdemia Dominator handguard. We need a sighting range of 800 meters  as well but luckily enough the MPX we   bartered for came with a BRAVO4  sight that meets this criteria. Strip the foregrip and the BRAVO4  sight from the MPX and take off   the smaller reflex sight from the BRAVO4 as well. We won’t be needing that. The final step is to assemble our gun. You can follow what I’m doing or just drag and   drop everything onto the gun  until there are no parts left. If you did everything correctly,  your gun should qualify for the task. Go to Mechanic, turn in the quest  and progress with the Gunsmith tasks. If you get stuck on any of them, feel free  to refer to my other videos related to them. Like the video if it helped  you complete this task. Write your name backwards in the  comment section below and subscribe   to my channel for more Escape from Tarkov content. Thanks for watching this video,  and I’ll see you all next time!

Channel: Daeldadris

Views: 92

Keywords: Daeldadris, Dael, escape from tarkov, eft, gunsmith task guide, gunsmith part 6, escape from tarkov gunsmith part 6, escape from tarkov gunsmith part 6 guide, gunsmith part 6 escape from tarkov, gunsmith part 6 eft, gunsmith part 6 task guide, gunsmith part 6 task guide escape from tarkov, gunsmith part 6 task guide eft, best gunsmith part 6 guide, easy gunsmith part 6, gunsmith akm, tarkov gunsmith 6, mpx mqb barter, bravo4 sight, fortis shift tactical foregrip, fortis shift

Id: J5PWDFYxLTg

Length: 2min 20sec (140 seconds)

Published: Mon Feb 19 2024