GUN Lighter restoration – COLT Python .357 Magnum Revolver

Gun lighter restoration Colt Python .357 Magnum Revolver I will make this work again A little squeeze of WD-40 To make sure we can disassemble the gun This screw is stuck So we need to remove it We need to remove one more screw And its hidden under the handle So we need to drill a hole to get it out All the Colt gun lighter parts This needs sandblasting Sandblasting using 6,8 Bar pressure IF YOU ENJOY THE VIDEO - PLEASE CLICK "LIKE" A lot of deep metal pitting on this lighter I will try to grind some of the metal pitting away As good as this cheap thin metal can get Cleaning all the small parts in the mini tumbler Now lets clean this handle The handle is still full of scratches It needs some work before it will shine First I grind it with very fine sandpaper Then I polish the plastic with car wax Now all the scratches are gone Now the mini tumbler is ready PLEASE SUBSCRIBE TO MY YOUTUBE CHANNEL Thank you :) All the small parts are very clean now This cylinder needs special cleaning 1 hour later Now I polish the frame Now I will assemble all the gun lighter parts Testing if the butane gas valve works correct Testing the trigger mechanism Yes its a cigarette lighter - NOT a gun!

Channel: Awesome Restorations

Views: 1,940,132

Rating: 4.8428345 out of 5

Keywords: Restoration, restoration video, restorations, lighter restoration, lighter, Cigarette lighter, butane lighter, revolver lighter, gun lighter, colt python, colt, 357 magnum, magnum, revolver

Id: _Z0pwIcSx2Y

Length: 13min 7sec (787 seconds)

Published: Fri Apr 09 2021