Cinema 4D Basic Panel Modeling Tutorial

Video Statistics and Information

Video
Captions Word Cloud
Reddit Comments
Captions
hello everybody in store I will try to model this piece in some authority so forceful like sushi to model layout and click this switched front view and press shift and Lee you I was like my English and I'll put a play change the orientation when kids fall and so it's not in in Center or image plane so I will change the offset then make the plane Edit pulldown treat these points and then select they will I will subdivisions redo that I play a game then I'd switch align cut select hold shift and make a cuts also here but also I will cut another one over here and over here so this point will bore me behold he's got me your sporty edge and I will cut you so so have a problem four points I will cut here and I will switch the polygon path by pressing ctrl I could extrude I almost lose polygon time for the execution you I will first model the inside of the object you I will make a cut look at or we can press G and F or it won't work here because I want cut from here to here so I will like a just outside slide and checked clone so you just put it on panel March these points you I will make a look at by pressing shift you can't slap them in the middle and select this edges no both one time also here I will switch to polygon turn and start to model these girls and I will increase the transparency here I will make two points close so here we are the title but in here the distance is far away so this was notice you this looks ok then I'll switch pages and scale them on Y axis also here in the x-axis so it will be symmetrical object so this edge should be straight x-axis 0 also here but in here actually this one too we should skip down baseball this H 0 this one to scale and actually we don't need to do here but we need to scale this is just based on this one because it's in the Y abdominals made me two times if I scale them all of them don't be a gap actually it's all swing here so what I'm gonna do is select this edge should I select them all and it would exercise I would snap slept axis here switch them off see you should scale and scale by pressing holding shift and it's perfect but this is not on zero you can change the position to zero and solve the problem but you should always be in the object mode not you you I will also scale this edge to now both both of the rest this is just an extra time by pressing ctrl and move on the y-axis see which two polygons 10 shortcut is energy or I will scale them on the X again so to make those points in on surface I will select and unselect brush search too much say it's not Plus on them switch the polygon panda game you you change the position of 2.20 I will exploit them search the polygon pan but I I want these edges its points so I will nourish them and make any cuts if I think we have more than successfully goes over here so I will merge them let's make a cut over here so we will have polygons for sides and less dense door here I will switch the line cuts and I will cats actually I will not cats I will use research searched polymer pan much the vertices scale down but I think it's another cut over here of very disparate you scale this point so so and I will scan this points to that to room so I will click and press closed polygon he'll need another supporting edge over here and out here so I will sorry those edges let's scale them I want to select and right-click slide make sure that clone is selected no I would select these three laws and I will exert a meaner but sure that I will select symmetry and click Club and select 30 polygons on axis it's also this one so this way it automatically merged or to season edges in the middle so I click down you see that click town okay I will search to pet selection so if I just can't slide slightly but we also need another supporting edge over here to here so it will transition to be so so so we don't need another cut or age you before that I will scale this point and sorry this is suicide it's writing pills before that we meet closer sporting a career to make this transition its sharp so I will select a just unclick clone and slide them over here and same thing or if this reality so when I just subdivision surface to the truth too much you cannot get right one carry-on 7x2 so I will say edges and slide and changed off support proportional so it will adapt to the shape of select it is absolution yes whoops selection that's your terror in selection now I will move down the z-axis you if I switch on solution surface you will see that spot emergence has worked you so now let's make this all selectors a just spike down selector spoilers by by pressing control suit appointments to select these points and let's see how many points with 10 so I will make a disc sort of reference and make it ten segments same and it's enable snap again before that that's pictured now snap those points that I've just created all this actually told this tell it to disk you those edges switch to scale by pressing ctrl scale ten people merge them all but first a shortcut yes you through the earth actually for that let's turn on no suit now and swimming it let's add some sporting edges so it does just by double-clicking can't slide that looks good we can play with geometry to make it more even but since this of that surface it's not that important but you can try it so let's try to model the edges so extra time and I will make room for the new level I here but as you can see this just will destroy it well I will sushi to polygon town you select of videos I will and change offset more distance yeah no problem so let's you but I think we all need a little bit more space between ages to make it more smooth you so let's turn on solid surface that looks good we can switch between one shaded but our use shortcuts in me for my frame na for the default shady by pressing at me you can see the generator flow if there's something wrong you will see here but that looks good but here it's more dense polygons not here because is here empty if we have time we can spend more time by adding a just make it even but since it's a flat surface I've got a community advanced we can do that's what they see thank you for watching bye
Info
Channel: polygonpen
Views: 6,082
Rating: 4.9288888 out of 5
Keywords: Cinema 4D, modeling, tutorial, hard surface, panel, 3d modeling, polygonpen, 3D, VFX
Id: zsjgTil6rbA
Channel Id: undefined
Length: 36min 57sec (2217 seconds)
Published: Fri May 01 2020
Related Videos
Note
Please note that this website is currently a work in progress! Lots of interesting data and statistics to come.