Bash Aftermath

Video Statistics and Information

Video
Captions Word Cloud
Reddit Comments
Captions
welcome to bash aftermath and i'm just now looking at the camera and even my hair is bad uh my wife actually let me sleep in this morning because you know what it's father's day so she let me sleep in which was a huge mistake so i got some folks that showed up kind of early but that's cool they woke me up yeah and that's just where's my prize over there we got andrew padalka say hello he's from tool miser over there we got chris anderson old iron shops and over here look at that dale dairy and the fall fall down dale and we missed that but that's okay dale tripped on that rock right there didn't pick up that rock so dale uh uh made well he made it to the chair unscathed congratulations dale dale was our uh production guy yesterday he was behind the scenes you might have seen him poke in and out a couple times but did a great job on the live feed and uh thanks for that dale thank you okay and uh you know most of the swap meets cleaned up we're up in the swap meet area right now uh there's still jerry from uh what's what's jerry's channel name do you remember know jerry's channel name i think it's uh valley forge yeah there it is valley forge welding he just did something with uh ron covell a little while ago if you don't subscribe to his channel go check out jerry at valley forge welding but uh he's still got his swami stuff packed up but he's look so he's gonna return here this morning to pick up and he's got uh plans for a belt sander uh you can probably buy those online but they got plans for this uh belt sander good morning sierra specialty how you doing still wish you were here well if you if you were here you need to bring coffee because we're all zombies today and uh this is what's left of tom lipton stuff it's been picked pretty clean there ain't much left and it's still getting picked here these guys are you might need a surface gauge rod that's a surface gauge rod that looks like a steric surface gauge rod or a punch or whatever you want it to be but what a great what a great box of stuff fun stuff to pick through craig young good morning and we're just kind of picking through a little bit of tom's stuff we'll go around to the shop and see what kind of mess they made in there another home shop guy says thanks again had a great time i'm glad you had a great time [Applause] and then there's my pile i don't know i've actually handed tom 100 when he got here and i said uh i've got a credit and i'm just going to pick what i want when i want it so i got another pile started until he and i can hook up and uh let's walk over to the shop and see what kind of a mess is in the shop [Applause] we've got trash to move we've got raffle prizes to get rounded up and get ready to get mailed out all the raffle prizes for the people who are actually here have been collected but all the internet ones still need to get um rounded up and put together we're going to open up the shop here i'm going to remind you about that qr code there's a qr code from american rotary go over there give them five stars and send a screenshot to chris at american rotary and you'll get some swag in the mail yeah we're going to fire the lights and there's an oven that we put on cool down last night and she's cooled down to 73 degrees she was running at 2000 for about six hours and by the way our surface temperatures never got over never got over 100 degrees we're using a little temp gun and checking everything uh brian said the air horn during the live stream was a nice touch yeah that was kind of crappy but uh had some people spot those air horns over in the shop and they uh they wanted to hear him so we put some compressed air through the uh through the air horns uh over here in the corner i'll show them to you i've got three uh tuned horns this is a tuned set there there and there uh those are straight off of a train of a southern pacific railroad car or locomotive and you only heard one horn brian there i got three so there's more where that came from and there's the indicator stands from uh the four jaw comp yesterday they were using a mitsutoyo and a uh one of my old ncos they're japanese made inco not a not a chinese but a japanese inco that's an old one and then the japanese made mitchum toyo so they were they were pretty well equal as far as indicators both on noga bases and here's something i bought this is the swami it's a morse morse taper too it's an older procure but all it needs is a rod threaded rod that goes back to the column and it's ready to go it popped right in my morse taper too fits perfect the taper is in perfect shape i gotta get some collets for it but outside of that you know those are uh that lipton had that i snatched that up soon as he walked in the door didn't even make it out of his truck i gotta add a few display pieces out here for people to look at talk about whatever got my little herring electric spin this is a more tilting electric spin that actually some assigned plate you put pins in here use it as a sign bar and set it up on the surface plate to get it get your angle so nice tool but it creates a lot of conversation and then there's a herman schmidt squaring block with its case so they were people were commenting on that and there's some more conversation pieces over here everybody just kind of just leave them out and let people talk about them this was made by mr rick gearhart nice piece that's for comparing uh cylindrical wall thicknesses in one inch increments and it uses a mic head out here to check against it and let's go let's go open the roll-up door golf cart came in for the night get a charge that little golf cart got a workout yesterday [Music] okay door's open now i can talk again here's the four jaw machine still put together i think we're gonna store that here we'll see what mr lipton has to say but if you if he wants me to start here i will uh the winner of the four jaw competition yesterday was mr james clow if you don't subscribe to him go over to his channel cloud42 tell them stan sends you that's his channel sticker right there good morning stan i hope the bash went well i tried to get up there but just got too busy with the shop lee gave me some wine for you and your wife oh nice okay anyways uh four jaw machine probably gonna stay here we'll talk to tom when he rolls out of bed and gets over here to see us and we got a cooler set up there so our with the blue hose so our melted ice water goes straight down in the cooler and that thing is just like uh just like air conditioning when it's getting fed with that stone cold water down the cooler it's like having an air conditioner so it's pretty good in here and we're on this side and i actually picked up a couple other things for the monarch i got some i'm a kdk i'm officially a kdk guy now i got some big tooling that i've never been able to utilize before there's no way this stuff would go into logan but i can get it on the monarch pretty easily and i got some kitty cake tool holders what's interesting about kdk oh it's thomas down and oh okay i know who you are hey buddy sorry sorry you can make it um the kdk 100 and the kdk 200 a dovetail the only difference is the height of them see this one's a lot taller this is the 200 that's the 100. i guess there's a 150 in between but they all share a dovetail so you can use the 100s in a 200 block yeah so the kdk is kind of interesting and i've got a few kdk pieces here that uh that'll fit on the tool post so i'm i'm collecting stuff for the monarch i got some morse taper my tail stock is a morse taper four so over here i picked up some drill bits there's some more staple forward drill bits there in the back there's one two three four five six seven and i picked up seven drill bits so it's a start i didn't have any more state before so i'm collecting um somebody was goofing off in the monarchs there's chips there but uh i actually i actually put an instagram up yesterday of fenner on the on the monarch uh trimming up some stuff for the four jaw competition uh the four jaw pot i think got up to like 1100 bucks or something yesterday and andrew um james clown took all that so big winner better pay for his plane ticket home but if you go on my instagram you'll see keith finner running uh black betty all right and i haven't i actually haven't even showed the pinstripes yet on uh on instagram i showed a few but on youtube i haven't so i'll kind of show you around here a little bit it's a little dark in here yeah oh i remember that gary well there's the colt motor starter that got pinstripe with lightning bolts and then he did just outline single single stripe outlines did some accents here uh he calls these scallops scallops are feathering so that was uh actually from the era and he just did little tiny accents nothing nothing that really pops and uh you see you know he did a little more scalloping here relaxing up the handle not not a bunch of big stuff it's a little bit on the compound there not a lot he gave me the colt logo back there on that plate and my my pinstripers got a sense of humor you know see those handles got a little bit of striping on him nothing major he went right over the old patina and he put he put a hardening additive in his paint so it would cut into the uh cut into the patina without wiping it away without wiping away all the oil and stuff it got cleaned very lightly and then the stripes went on right over the patina and he found a couple of bolts that were right next to each other so he highlighted two bolts right next to each other and you know he just did a couple little touches here and there just enough to make it pop did my motor starter for my coolant pump give me a forward and reverse feeding thread just some little accents here and there everywhere you look there's a little something and you did the belt guard and all the the clutch drum and all that stuff in the back so uh his name's uh shaky larry but uh yeah he's uh he's the one that pinstriped the the monarch but he's also the one that pinstriped the uh uh the green amp mobile anyways let's get back to the bash aftermath uh golf cart like i said yesterday had a workout hauling ice hauling trash hauling drinks hauling people so we were golf cart shooting cool down yesterday i did put a trailer i showed this on instagram but i didn't never really showed youtube wait did you just put a trailer hitch on the on your golf cart well you know yeah i did and you can take this uh shackle and put in this other hole and it'll flip it the other direction if you need it but usually i just tow with it flat and it's getting there i got another clevis pin there so uh yeah i put a trailer hitch on my golf cart and as long as you use it in moderation it tows that little black wagon right there real nice too so you can use that to haul ice all trash haul swag towed around the property i mean it's got a steering axle everyone had a little uh you know everyone had a little uh radial flyer when they're a kid and there's mine all right let's go around this way this is the tig welding uh seminar area after the seminar was over and remember that black backdrop behind the uh behind the lincoln sign well that's what it was hiding was a couple of toilets so jim bollinger we put him right next to the toilets uh for his seminar but you couldn't see him on video and i uh we hit him so well that actually we had people going where's the bathroom so uh that's where they were the whole time so maybe we hit him too good and uh out here on the out here on the patio this is where dimide uh was set up so here's the dynamite boys uh these are mine i am now an affiliate for diamide so uh you know if you use your bash code from yesterday go go back and look on the ticker tape that's running we got a bash code if you want to uh get some money off on these dynite clamps but we had a ticker tape running at the bottom of the live feed all day yesterday and get you some money off on the clamps but appreciate the dynamite guys for coming out and demoing all day long you know they had my impact that's my impact there they had their impact so we're able to compare them trying to break these things you can't break these clamps so i'm pretty good and then all the lincoln stuff's packed away like i said this is all the training material here and here's uh here's the lincoln booth lincoln zt fab booth so this gets broken down stowed in the attics for next year and we keep having people roll in here this morning so uh jim was out here almost all day yesterday he started about 8 30 or 9 o'clock training people and he was out here till 3 o'clock in the afternoon teaching people how to tig weld so he had a full plate and i sure appreciate everything jim bollinger did to he sacrificed his day basically to teach people how to tig well and i hope everyone had a good time i saw a few coupons from some people you know they kept their coupons that they were welding on apparently these people didn't you know there's uh there's some learning going on there there's some steel this guy was getting it there's some stainless and somebody's getting it there it's not bad you can tell someone's running a little cold but they're still getting it someone's getting it there to lift off something happened on liftoff not sure what they did there this guy needs some more practice so that was the uh that was the lincoln booth from yesterday and all the coupons and that's all the test pieces lincoln sent over but uh i appreciate lincoln for sending all that stuff over we had a newcomer somebody pulled in don't know who it was no i hear tom lipton he must be here claim it claiming his stuff got two tri-rulers a pin vice and a radius gauge holder this is my pile sir i know i've still got a credit with you how are you doing this morning that's all you want that's all i could find i wanted this morning well i got the stuff i got from you no no the stuff i uh got yesterday too i don't remember what what did i get yes oh the pro can your dude i can't even remember i got the tapping head okay did i get anything else yeah i think you got something else but i don't remember what it was well i got a credit with you for next year say hi to youtube we're doing the aftermath video hi youtube hi youtube hey yeah he's got a bash hangover yeah hey hey uh you're uh your live feed was popular was it yeah yeah you looked like you that's surprising no no you looked like you were having a good time up there it was all right i mean for the sound well some good questions were coming in mode can you do that one more time so i could project my voice well i you know i played defensive end in high school and it wasn't because i was fast and it wasn't because i was tough it was because i was loud and i got i called the play all the way down the line oh really that's the only reason i played uh defensive end i was a terrible football player yeah but you could but i could project excellent i should have been a drill sergeant i think i don't know [Laughter] all right pine is actually really good out in the shop said i like the format this year well we've got mixed reviews about the format about changing up the uh you know all the people you know every hour we were changing uh the guest hosts and you know after you've spent an hour or something behind the mic uh you wonder how dale dary did it for seven or eight hours straight just incredible you know so anyways we got 100 people watching i'm going to show you a peek at the patio and there's there's an awful lot of cleanup left to do i'll try to get over all that there's the big duck there's the patio there's a lot of trash down there to get cleaned up and we're gonna the tent people are coming today to start knocking down the big tents and we're gonna start folding up tables and chairs and put them away clean and everything before you put it away and then we gotta get the uh four draw machine broken down put away we got to get the lincoln stuff knocked down put away and right now we're just kind of in bash hangover mode so uh we're all pretty whipped i'm really whipped but i hope everyone that attended had a good time glenn trewitt wants some help cleaning up matt's garage good to see you guys chilling hope it all went well all the best in england been a while since i made a bash 2016 and won the stainless steel barbecue grill wow that was a long time ago i remember that thanks for your efforts on hosting the event glenn treywood says want some help cleaning up are you close by glenn um we're just yeah i mean if you want to come help rj doyle says he's still drunk oh no i'm not still drunk i didn't even drink that much last night i'm just tired but uh i appreciate everyone that uh watched summer bash attended summer bash um helped out yeah glenn if you want to if you've got nothing better do you want to come up and fold up some chairs and tables and put them away yeah come on up we got leftover barbecue from yesterday we still got drinks here did i pay kilroy's bail money to tsa you already had an issue with his pelican case no he's gonna get it back uh actually tsa wouldn't let him fly with the shars competition toolkit um i guess it's waiting for him back in jackson he's gonna fly back and go straight to tsa and they're gonna allow him to pick it up it they said it had too many batteries in it though there was the little coin watch batteries and i guess there was too many of them so uh they wouldn't let them fly they wouldn't let it fly it next time you'll have to take uh take the batteries out of all the machines hey we only had a couple casualties during the battle you guys wanna hear about the casualties i can find one i've got one in my drawer let me get this stuff out of the way oh who won the amp uh that was uh his name is todd it was his last name todd duke uh and he was actually here um well oh we'll go down and look at the amp let's see this drawer fills up with all kinds of crazy stuff we're having a bash you know i got barbecue rub and stickers and all kinds of stuff um let's see this one got killed yesterday it's actually a pretty nice magic toyo but it got dropped in the stem there it is stems locked up so it's she's toast it blows you know mr toes this the stem is really tight inside of this little spindle thing here uh super sensitive to heat and super sensitive to this the spindle here bending but that thing's yeah she's toast and i don't think there's any repairing that so that was a casualty from yesterday that was dropped during the four jaw competition and then uh i'm due for a spindle motor on that thing the spindle motor died on the surface grinder not gonna go into details there but if you guys want to see the amp before it leaves uh the the gentleman's name that won the amp uh is todd duke i remember that and he's here and he's coming back this morning time to pick it up but it's still here so i'll take you down and give you one last look at the amp those guys are over there swap meeting already look at that swamp meet day three pickings are pretty slim over there but here's the amp rotary and i'll show you the pinstripe typing i don't think i've showed that on this channel yet so we put lightning bolts here shaky larry did all this and he put the breaker values and then randy richard made uh oh i'm i'm losing my feed i hope you guys are seeing this throw up a comment if you're seeing this i'm getting kind of far away from the access point but nice pinstripe the top few seconds how hot was the weather bobby vincent it was about 97. anyways uh todd duke's coming to pick up his amp rotary phase converter hi from vietnam hello vietnam good morning vietnam okay you're losing me again i'm gonna get back closer to the shop hi from greenland up actually you won something yesterday joe cool erickson you uh won something um it was a welding cap i don't think it's gonna be worth shipping it to you but you did you did you did win a lincoln welding cap one of those soft like baseball cap things they wear under their welding hoods but there's the new company it's called american kiln and that's with a probably a kind of a familiar looking hotshot logo but the stars will never align like this again this is the very first hot shot by american rotary or american kiln and that down there is the very first hot shot by barzi industrial never again will those two be in the same place at the same time so the very first one i made that's the very first one they made and we're good we gave away serial number uh two yesterday which has not been built yet i'm taking delivery on serial number one uh whenever it gets built and then we're off to the races and tom was premiering his uh electronic lead screw what's the official name for that tom the bill dexter the bill dexter the bill dexter yeah from dog meat engineering well the dog meets you or do you did he think of that no he uh i got that from uh from the from bill oh okay yeah i started using it i'm sorry so it's it's kind of a unique setup it was an easy setup the only thing special that he had tom had to make was this little fellow right here to go on stands yeah on my mill my mill was a little different than a standard bridge board and i just got a clone so i sent him dimensions and he brought the part down and got it got it together looking split and he was able to uh you know do some demos with it it's kind of cool if you haven't checked it out go to tom's channel and check that out over there what's the name of that video dog meat uh no uh so uh honeydew oh the honeydew that's right let me get to see the whole thing well you made the yeah you made the acrylic drill bit yeah that was that was so cool and it turned out really nice i mean you didn't have to flame polish it or anything to get it yeah it stays pretty clear when you have to machine it yeah i used uh dawn soap and water uh as a cutting lube which works really good on uh on acrylic nice nice yeah i watched that i love that yeah and that was a popular video and let me tell you this thing on video it looks so much bigger but this is just a tiny cube you can see stan's meat hook well that might throw the scale off don't scale up the wrong way well yeah now it looks tiny yeah it looks but it is pretty small okay guys well i'm gonna wrap it up i've been live for 30 minutes that's about all i want to do this morning and uh um frank contra said my homemade phase converter broke on me i was hoping i would win it i won the hot shot 360 last year oh frank congratulations on the 360. i'm sorry you didn't win the phase converter okay fellas i'm gonna flip the camera around and uh appreciate you watching appreciate you watching yesterday for the event it was a long hectic day for me you didn't see much of me yesterday i was busy running the party but uh and i i'm told by the live feed guys that because i came in and i opened the show and then at the end i closed the show neither one of those got captured and i what i from the guy brian that did it uh from what i hear he's gonna make a small video beginning and end whatever and we'll throw that up there so you'll at least hear my intro and my exit all right but today thanks for watching and thanks for viewing the bash and enjoy the rest of your weekend
Info
Channel: Shadon HKW
Views: 2,972
Rating: 4.9723182 out of 5
Keywords:
Id: pZZfyOaOrx8
Channel Id: undefined
Length: 31min 44sec (1904 seconds)
Published: Sun Jun 20 2021
Related Videos
Note
Please note that this website is currently a work in progress! Lots of interesting data and statistics to come.