Ammo Casings and Resin.. A Screw Driver Handle

[Music] ah well you suppose I should do with these I know what I'm gonna do with them I'm gonna make a screwdriver handle for it having these is our non ferrous it's my turn what I think I'm gonna do what's that doing in there those aren't supposed to be in there we reload those I accidentally got put in there by the looks of it 45s aren't supposed to be in there I'm gonna put them in here anyways I was a little worried that it's not a magnet that the primers were gonna have to be knocked out but it doesn't appear that any of them are magnetic even at 40 is not magnetic and that 357 in there don't split see it enter no good but I think how I'm gonna do this is I'm going to put a little bit of everything together 22 magnums I think I'll probably fill these with resin first that way I don't have any air pockets in it and then I'm going to take this handy-dandy mold that easy wood sent me with tools and I know I know that I need to be up to about here for a screwdriver handle I'm not sure on this one but so I'm going to cut this a little high and then we'll just kind of assortment drop those down in there like so and then turn me a handle so I kind of got a an assortment of them I don't know if I'm all of these but I put some in there just cuz and then of course the 357 I got a couple 40 cables out of here and Joey you leave these things all over the place yeah so I like I don't really know how to go about this I'm gonna try to just kind of rubber band them together I guess I will just hold them together so I ain't knocking them over some magazine hold seven two four six seven seven the idea is so I don't get any air pockets trapped in here any of them or this way or that way I thought I was gonna have to knock all these out it doesn't appear I'm gonna all right yeah so let me get this all done and we'll go from there sorry so two to one on the total boat all right so I have 9-millimeter 45 380 22 magnums I could have done 22 long rifles but they're really little that 357 couple 40s from my my Joey to two threes and then a couple extra nine millimeters I'm gonna fill them with the red because I didn't know what else to do but this is just to make sure I don't have any air pockets she's taken too long [Music] say anyways see down in there well the drill didn't go straight first off that Center that's not and it got too hot and started like this is pushed out I didn't expect the K seems to be that hard so I'm gonna try to step Grill it up through the center here oil it hasn't going and hopefully I can get this hole up in there far enough I can try and finish this I'm not gonna bore you with any of that maybe a little bit but not much okay so I'm gonna use this for a template basically nope nothing set in stone just rough guesstimate somewhere up there we flip it around I'm gonna do most of the work like this because it's gonna take me forever stuffs hard and you can't get it hot as you noticed it bubbled up so I'm gonna like said try to go something similar to that [Music] [Music] [Music] okay so I've sent it up to 320 I think at this point I'm going to put my uber and turn it around finish this put a knob on it sand that and try to smooth the rest of this out when it's all out here Yorkshire grit both Yorkshire grits and probably a CA finish just to protect it it didn't really adhere to the brass that well so hopefully a thin CA will seep down inside and hold us together it's more of a novelty thing than anything so with a little bit of qualifying any of you've worked in the industrial Field I had to qualify this because my herb or isn't in their Street that's as close as I can get it [Music] well for all the hassle that turned out pretty good it is a bit fat but there's a reason for it when you get older hands don't work so well so it does look pretty cool I'm still gonna treat it with CA I'm probably gonna do that and then come back when I assemble it let's hope anyways there's a couple runs in the CA glue one there and there's one around here and pretty happy with it aside from that I mean it is a screwdriver should be okay yeah I would think okay so I want to use this free ink pens of paint remember it's called Arbor saver or something like that and then I'm gonna put it up against here and push it in with tailstock was this just a hair bigger than my thread so it should go right in there no problem I'll mix up some epoxy and put it down in the hole push it in there till it cures and be good to go [Applause] [Applause] well there you have it one handy dandy super-heavy baseball bat Club I'm a screwdriver handle it's really heavy what let me do some fencing this is for when you need to get the screwdriver in the other guy's car to screw from your car I don't look too bad it uh these were really hard but hey it's a project looks like a giant bottle stopper I'll put some pictures up like it hit like 21,000 um thank you by the way oh I really don't know what to say I haven't been out here much hopefully this one doesn't go up before it's supposed to like the other ones did giant bottles too pretty cool I like it anyways yep Willa crooked wobbly you'll never know uh yep we'll try and see you next week my

Channel: The Pohl Barn Productions

Views: 2,303,304

Keywords: total boat, jamestown distributors, mitten made, michighan, ammo casings, epoxy, resin art, wood turning, woodworking, easywood tools, nova galaxi, handle turning, screw driver, maker, michigan turner, outside the box

Id: bHOzyVhiSdI

Length: 16min 31sec (991 seconds)

Published: Thu Jan 31 2019

Reddit Comments

[u/Redneckpride99]

How’s resin to work with? I wanna build a shell casing table for my new place.

[u/[deleted]]

is that an assault screw driver?!

[u/rabaful]

Would it be considered illegal if you used ammo and not casings?