[1020] SentrySafe Opened With a Coat Hanger!

this is the lock-picking lawyer and I just got back from a trip to Home Depot I'll admit I wasn't expecting much when I dropped this sentry safe into my cart I figured I could probably pick it open but I was not expecting there to be a hole in the door to which I could literally stick a wire and unlock it there's actually three holes where these three little lights come through the lights are attached to a circuit board on the inside of the safe and that circuit board is held in place with a sponge so we can just push these lights out of the way and make room for this little bit of coat hanger that I'll use to unlock the safe let me show you how that's done going to push this little green LED through then I'm going to position this wire so I can reach the solenoid okay you can see it's currently locked I'm going to turn this wire and it is unlocked okay let's turn this around and I'll show you exactly what's going on inside the safe we have three screws to take the back of this door off okay here we have our high-security sponge you can see that green LED that I pushed out of the way and all I did was a reach through this hole and pushed down on this solenoid which allows the bolts to retract okay there's more than a few problems here the most obvious ones are you shouldn't have easily accessible holes in the door and securing critical components with a sponge is a problem as well but what should also be obvious is that this safe is a product to avoid in any case that's all I have for you today if you do have any questions or comments about this please put them below if you like this video and would like to see more like it please subscribe and as always have a nice day thank you

Channel: LockPickingLawyer

Views: 4,430,984

Keywords:

Id: i7g-TvczpSw

Length: 2min 28sec (148 seconds)

Published: Fri Jan 03 2020