Zastava NPAP 5000rds later: The End!

[Music] [Music] the stuff in pop 5,000 rounds behind us guys what a journey it was but first things are first let's talk about the physical appearance as always so no major changes the stock is still we got two still problems with the start with the stock furniture and as I told you we have to tighten up that screw in the back very very off and it's not the problem that the screw is getting loose it's the problem the wood is work out inside so whoever is going to get that rifle I advise strongly to buy the new furniture to our get rid of that problem also upfront what we got guys this is the special upper handguard from the cool guys at Highbury customs its so-called cheese grater now they make them for the for the yoga so you can talk to them I'll put the link in the description and you can get this this one keeps alpha our rifle helps to keep the rifle cooler because you got all these vent holes and it's a practical practical thing I like those cheese graters a lot other than this nothing fall out with the exception at the beginning of the previous episode I told you this screw for the dust cover bottom fall out and I didn't bother to go and fight the replacement not what I'm going to do our included whoever is going to win the rifle going to include that you want to install it go go ahead you can go to the hardware store find out knot and install it you don't need it for running this rifle we finished today with the accuracy test I wanted to see how we did on the accuracy and after all the torturing after all the 5000 rounds of mag dumps and everything guys I shot it are they group nothing impressive this is from hundred yards but with the red dot only and with the moveable stock from the wolf a full metal jacket around so nothing impressive it's slightly above a for MOA group I'll take it in this conditions I'll take it on that rifle as I said nothing to be excited about it but it is what it is I'm not going to Archie tour shoot 10 groups and cherry-pick one for you I finished its I finished that 5000 rounds count I went to the hundred yard shoot it and this is the result so not the best group but again you know the conditions this rifle is right now maybe if I'll have a better stock and you know better arctic that group will be tighter and I strongly believe that this is below 3 MOA rifle but what happened here it happened here I'm not going to cheat what else as I said other than this from the physical appearance I do not see any problems we did have a little bit more malfunctions today due mainly our failure to feed what was happening the rounds were getting jammed on the way to the chamber and you know that was the the main problems during the dumps not that during the regular shooting everything was working fine but during the mag dumps that was happening again you know it is what it is you could feel that the bolt carrier was working a little bit harder today slower on those rails but as I said it's a lot of mileage already on this rifle so you know I'm glad it's performing let's put it let's put it that way all right let's disassemble the whole thing as you can guys see we got the combo here with the 307 rail from our let's regulate this is the full-length rail for the Yuga rifles so everything sits it's nice and low I really like those you can get them from our store good value if you want to add the optic and let's dive inside because this is where the story is today right as always the recoil spring I see absolute in I think honored their eco Spring performed perfectly fine however and I don't know are we reaching the limit of that record spring but I will show you maybe even now what was happening today I could feel it that it was like a little bit you know harder work on it see and a few times see it's working great I I don't know maybe I'm overreacting but uh all right let's pull out the bolt carrier and bolt and today I come prepared all right let's clean up those parts we'll start with the bolt let's clean up those parts before you will see the picture so actually on the pictures you should see the nice pictures of the cleaner parts at least not cover it with smudge or anything and let's start with the bolt the the firing pin everything is looking perfectly fine on the firing pin there is nothing on it like we had the problems at Palmetto State Armory right that pin firing pin was getting cheap out a little bit but here's looking good the eject ejection ejector claw is perfectly fine the rifle has still very strong ejection and then up front everything is looking good I really don't see anything jumping out how are we doing on the back of the locking lugs this is still smooth that's what we want this is very smooth and nice this is how it should be so this bolt is doing very well guys and the rear of the bolt is also perfectly fine I don't see any problems with it looking up front always looking good so that's that's the bolt for you alright let's have a look right now and of course my tool went down let's have a look at the bolt carrier and we'll see again let me wipe it clean everything it's a lot of rounds you know every thousand adds up guys and ok so the piston head is still holding up nicely there is slight wobble but that's nothing that's expected to be on the a K rifle I cannot remove the gunk really from the top of the piston head but I don't see any damages on it the piston head is looking perfectly fine and as I said there is a wobble but it doesn't bother me at all let me see inside the channel again there they're all dirt but always looking good here and how are we doing on that beautiful reel and a tail there was the formation I talked about it guys but look that deformation is not progressing so whatever HAP I don't think so it moved I don't it's you got those sharp edges so and it's flattened at end but it's not progressing so whatever happened it happened at the beginning you know and then it something settled out on this rifle and that makes me happy because this can really lead to the serious problems if it's progressing but it is not it stopped so that's a good sign and everything else is looking great on that bolt carrier I don't really see any other damages if you see something say something ok but I don't alright let's dive inside the the look of the trigger group the top of the hammer it's looking perfectly fine and and I don't see anything jumping out of the bed then we got a little bit marks on the trunnion but nothing really like you know crazy and it's not really causing any problems I'll try to clean it as much as I can here so we can have a better view oh boy this is oh my god this is like totally dirty but again maybe the little bit piece here on the top of the tree and on the right side you could see like it was squeezed and the same on the left side actually the marks so yeah you got and I think we have seen that in the previous episode here and here I will take a picture so you guys can see that's something to watch for sure the trigger hammer is looking good the trigger group is looking at you let me have a look from the bottom from the bottom I really I think maybe here we got somewhere marks but that's nothing you know alarming at all that cut out we are already based about the cut out I'm not going to repeat myself but it was nasty whoever did it didn't have a best day of his life doing it okay all this is looking good the rivets do we have any problems with the rivets falling apart or or moving away from the receiver right now nope they don't look pretty I told you this right away guys this life rifle is not going to win any beauty pageant contests he's not going to be a Miss Miss Universe but everything is holding up in one piece let me move that can I move that oh why did I move the lever without any help and we have a gas tube and everything on the gas ship is looking good for the last time let's do the super duper pirate arrr and everything is looking good and let me check yeah everything is looking good inside the gas tube as well which is awesome barrel and the lower handguard as I said the lower handguard quality of that wood is really below the average if you guys have the sources online sources to get the real wood for the you go do it and replace it gas blood insight is looking perfectly fine we have some last we have some last peeping through peeping through that bracket for the loop for this link we got some rust around the barrel a little bit and and you know again it is what it is I'm not going to to comment on it inside the chamber I do not see the last which is encouraging as you know these barrels are not chrome lined guys so you know you got a deal with it you gotta keep it clean basically otherwise in the humidor climate you may have a problems with the rust peaking and everything how we doing with the real leaf real leaf is holding up no cracks no damages bunny ears are looking good on the front post as well and the dead and pin still working pins are not working out either from the front post or from the gas back that pin on the gas back is nasty but he's holding up pretty much from that from the physical appearance that's it guys the question is would I buy this rifle again if you know if I'll have a chance I'll tell you this for when when we started the price was for them a 550 there were below 600 dollars okay now because of what's happening a political climate or election and everything the the prices are all insane I think someone was saying from California that they had them for like 800 dollars or something I would not pay that money for them but I'm telling you right now 550 600 650 may be anything more than that is just getting crazy I think so there are other better values on the market for the folded rifle or EK rifle if you want it but that's that's me okay i know that you guys have a strong fan club in the united states but you got to think about a dad way right of the bed you have to change the furniture so that's the extra addition of the cost and that just keeps piling up unfortunately the same should be said about the water right now because there was our ships with exactly the same chip you know great wood but that's pretty much it what we're going to do right now are we going to choose the one lucky bastard who is going to receive this rifle of course all the laws are applying guys so federal and the state local laws apply applying the rifle will go to your FFL dealer who is licensed to do the transfers not to you directly so you have to provide move your FFL data and ship the rifle to that guy also you have to post pictures of you with the rifle and you will get it on our wall when we'll get them you know when you will get the rifle into your hand so everyone can see that whoever is getting it is a real person and not some fake guy all right so now what I'm going to do I have shells collected with our with the numbers as always and we'll select the one lucky bastard okay let me turn the head let me find the bucket head with the shells like me mix that I'm not looking not looking not looking mixing mixing mixing okay pulling 1 the number is 132 132 and we open my cheat sheet I don't need this and 130 232 how boy I'm going to butcher that huh guys the name is David Levi's lvy from Fort Washington Pennsylvania David Levi's oh you should see your name are posted underneath from Fort Washington Pennsylvania as I said please contact me with your FFL data and our ship that our life will as soon as possible that's not the end guys don't go away anywhere yet we'll do one more thing we have to do the final head spacing check so David wait because you may not get that rifle if it's not going to pass the test ok let's see what the Serbian Beauty can do for us and closing in no it's not closing on an organ gage one more time nothing then I'm really like smashing you shouldn't be doing it but good David it looks like you will be getting a rifle congratulations [Music]

Channel: AK Operators Union, Local 47-74

Views: 227,909

Rating: 4.9099636 out of 5

Keywords: zastava, zastava npap, npap ak47, npap ak, zastava century, century npap, century ak, ak47, akou, rob ski, 5k rds test, 5000 rds test, zastava ak

Id: yvAz185Z6-I

Length: 15min 6sec (906 seconds)

Published: Fri Nov 11 2016

Reddit Comments

[u/EnclaveAgent]

She came through. Mine works good. It is a 2015 model with the G2 trigger and the high rise stock, that some hate so much. But if you hold the AK the right way nose nearly touching dust cover, it does not slap.

[u/Maggioman]

At 2:06 The gun seems to fire out of battery https://youtu.be/yvAz185Z6-I?t=2m6s

[u/DoctorBallard77]

Where does one find a vented gas cover?