Web Server Configuration in Cisco Packet Tracer

hi guys in this video I am going to show you how to configure the web server in cisco packet eraser so let's begin click on network devices select routers then I came to the PT the outer on the working page then we want to switch so to back into the PT switch on the working page they said it below the router then some in devices we see 0 in the PC one now we want three saw the works sort of a kind about self-worth said the word 0 it's all about the one and this other one too now let's make the connections so click on connection select Auto connection and make the connection between the routers you the industry which 0 then between be C 0 and C which 0 then between PC 1 and C which 0 click on switch turn it off and let's add some modules select the second model and place it on the switch and turn on the switch close it select Auto connection and make the connection between switches so we check the service so which 0 and 7 0 then between switch 0 and so the other one then between C which is e the vendor said over to now we have met all the connections now let's configure the router so click on the router click on confi click on fastethernet 0/0 and need to say that this is one ninety two dot one sixty eight dot one dot one and the subnet mask is 255 dot 255 dot 255 zero and turn on the router directly called CLI press enter and then type IP dhcp pool made a inter then type network 192.168.1.0 space 255 dot 255 dot 255 dot 0 press enter default - router space then the IP address of the router which is 192.168.1.1 press enter and then exit close the interface so this is the IP address of the router which is 192.168.1.1 which we are going to use as a default gateway for all the devices now click on server 2 and need city namely - DHCP so this is a DHCP server you click on server 1 in late Susan imitates DNS so this is DNS server click on server 0 inlets the limit as wave so this is wave server so these are the three servers which we are going to use now click on PC 0 then click on desktop you need to say die here this of the PC 0 so click on DHCP in the IP address ease 192.168.1.2 when a default gateways one ninety two dot one sixty eight dot one dot so this is the IP address and the default gateway of PC zero 1.2 and 1.1 now click on PC 1 desktop IP configuration select DHCP in the IP address C's 192.168.1.3 and it default gateway is 192.168.1.1 close it so this is the IP address and the default gateway of PC 1 which is 1.3 and 1.1 you click on DHCP server click on desktop click on IP configuration in let's say type layer this is 192.168.1.3 let's make it 1.4 and the default gateway is one ninety two dot one sixty dot one dot one which is the IP address of the router in let's add a DNS server IP IP out of this as 192.168.1.5 close it so this is the IP address default gateway and DNS other one of the DHCP server which is 1.4 1.1 11.5 again click on DHCP saw the wall click on services select DHCP and turn on the service then say it did default gateway which is 192.168.1.1 and a DNS server these one ninety two dot one sixty eight dot one dot five after this click on add save click on save then close it now click on DNS server click on desktop IP configuration in need said I clear this s 192.168.1.5 in the default gateways one ninety two dot one sixty eight dot one dot one and the DNS server IP addresses one into two dot one sixty eight dot one dot 5 close it so this is the IP address and default gateway in the DNS server of the DNS server itself which is 1.5 1.1 and 1.5 now click on again click on DNS server click on services select DNS and turn on the service close it now click on web server click on dick stop IP configuration and let's say type enter this is one ninety two dot one sixty eight dot one dot six and the default gateway is one ninety two dot one sixty eight dot one dot one and at the end of server these one ninety two dot one sixty eight dot one dot five okay it's an invalid DNS I think I made some mistake so again let's type the DNS server the IP address which is 192.168.1.5 now close it so this is the IP at this default gateway and DNS server of the web server which is 1.6 1.1 and 1.5 [Music] again click on the web server then click on services select HTTP select index dot HTML and click on edit then we move the selected part as it is of no use and let's do the some header for example welcome to Cisco and close the opened tag then click on save and yes close it then we click on DNS server and the services select DNS the give the name as www dot cisco.com and I period this is one ninety two dot one sixty eight dot one dot six which is the IP address of a web server and click on add so we have successfully added as I called close it now click on PC one click on web browser and type the IP address of that website which is 192.168.1.0 and click on go so this is the web page which we have added recently welcome to Cisco so we have successfully configured the web server and we have successfully made all the connections so that soil in today's video if you have any query let me know to your comments and subscribe my channel for more informative videos well cisco packet tracer thank you

Channel: Pratik Matkar

Views: 90,870

Rating: 4.7362046 out of 5

Keywords:

Id: HWZ6_Z8bi2c

Length: 11min 24sec (684 seconds)

Published: Fri Aug 02 2019