Tee Square It 'I" 2017

[Music] hi my name is Lu Robin and 11 years ago I created the T squared over the course of the 11 years it has become the number one heat press graphic alignment tool in the industry this year I'm introducing the updated version which we are calling the I unit the icon for international we added centimeters for our international customers and we have the inches for our domestic users when redesigned a t-square we've added a groove on our Center bar and instead of having side railings on each side on the wit bar we added a center rail which goes into the wit bar groove for easy sliding and we don't have to worry about wobbling effect the parts of the t-square are the collar plate the center bar and the width bar on the collar plate we have silicon feet to lift the t squared off the garment well the first thing we want to do is line up our color plate with their arrows on on to Z seams of the shirt I have this arrow here at the end and this arrow here at the end and I'm going to move those that way now I move this so that arrow number three and a half inches and arrow three and a half inches here are on the seams at the top of the collar that means the center bar should be sicker but what we're going to do now to make sure is we're going to take the width bar and we're going to place it into the slider and then we're going to make sure that each side of our with bar is even on to the garment now over here on past ten and over here I'm under ten so it tells me the center bar is not accurately on there and it is now all I had to do is swing it over just a little and now that Center the next thing we want to do is find the placement of our design now a lot of who are doing plastisol transfers or inkjet transfers and sometimes you can't see through the papers so you might want to look at the design and maybe put a little mark on each side I didn't do that this one because I can see through it enough so what I'm going to do next is place my design under my Center bar and I'm going to move the top of the design three inches down from the collar and now I'm not sure if I'm equal to both sides the whole point of the alignment tool to make sure it's aligned so now I'm going to take the width bar place it here now I want to find out that east side of my design is an equal number so this is a five and a half and this is at five and a half so actually that is centered and now what we want to do is make sure that we're parallel now that graphic is centered now we take off our Center bar our with bar remove it and press a shirt and you just place your design Center on the shirt I hope you found this tutorial helpful and if your interest is in purchasing the t-squared go to heat press essential.com and you'll find a list of all our resellers in United States and in Europe thank you for watching and if you have any questions you can email me at blue at LG Robin com thanks again [Music]

Channel: Louis Robin

Views: 52,050

Keywords: heat press, Alignment tool, graphic alignment tools

Id: 0YFWxj-JB98

Length: 3min 52sec (232 seconds)

Published: Wed Jun 07 2017