Starfield: Serenity (Tutorial/ No mods)

foreign [Music] what is up in this tutorial I'm going to be showing you how to build the serenity from my favorite unfinished television show Firefly this build can almost be entirely built at your settlement Landing Pad however you'll need a few pieces from the new Homestead in hopetown ship technicians to do this you'll have to slap some random Parts on your ship to make it operable and then swap out the parts you need once you get to the appropriate technicians if you're new to the channel be sure to stick around to the end where I'll be showcasing the final version of the build if you want to see more themed spaceship designs consider subscribing to the channel because I got more on the way so with that said let's get to it alright so we're going to be starting off the build by placing a hope for landing Bay once that's placed we're going to take a Teo 3x1 mid piece and we're going to put it right over the landing Bay but there's going to be a slight overhang on the back side of the landing Bay once that's placed we're going to put uh some portholes right in the center portion of our three by one piece and we're going to do that on both sides once those are placed we're gonna do a hope Tech nose B piece and place that on the front section right above the landing Bay and then we're going to do a demos belly piece and we're going to throw that on the back side of this three by one piece once those are placed we're going to take these ng-15 landing gears and we're just going to throw these right in the available sections on this three by one piece I'm gonna do that for both sides and then the thing with these these landing gear I don't think they're available at your settlement Landing Pad so you might actually have to fly over to new Homestead to have access to this piece so what you'll probably have to do if you're if you're building from the the bottom up you'll probably have to throw in something you know just any any Landing piece just to get it functional just so you can fly it over uh two no new Homestead to get this piece so once those are placed we're gonna throw on the Nova galactic landing gear and same thing uh same thing applies um when it comes to this secondary landing gear this ng20 uh you'll probably have to throw on just a random landing gear to get your ship functioning so you can get over to new Homestead to actually get that available piece once all those pieces are placed we're ready to move on to the main portion of the ship [Music] all right from here we're going to take a Teo 2x1 mid piece and we're going to snap that right to the front of our three by one piece we're then going to take and I think I can snap it this 20t hollow uh hauler cargo hold we're just going to snap that right to the uh the front of this two by one piece I think this is the only other piece that you won't have access to when it comes to your settlement Shipyard but you can also pick this piece up at the uh the new Homestead um uh ship technician so we'll just snap that right to the front of that once that's placed we're then going to take this 700t he3 tank we're just going to connect that right on top of this portion of the uh the three by one then going to take a the pinch 7z reactor connect that right next to the uh your fuel tank [Music] then going to connect these white dwarf the 1020 engines and we're going to connect these to the bottom snapping point of of our reactor we're gonna do that for both sides too foreign so now from here I'm going to take some uh some cargo holes this is a Caravelle V103 cargo hold we're just going to snap that onto the bottom snap point of our fuel tank we'll do the same on the other side and then we'll take the lighter Caravel v102 this one's gonna be a shielded cargo hold we're gonna snap that to uh this midsection uh right here Place another one on the other side right let's see right now from here we're actually going to work on these uh these side engines so this hope Tech um cross brace and actually I lied so I these ones you're going to be able to have x2 in Hope Town so you have to once again make a trip over to another ship technician uh to have access to uh to these braces but we'll snap that right in this portion right here and we're going to connect a Stroud uh one by one uh piece right here and then we're just going to connect see this can be a supernova 2200 engine and the bottom snap point is going to snap to this one by one the Stroud Eckland piece and then from here just going to take these Deimos wings snap one to the one by one piece and we're gonna snap another one to the engine piece and I have them rotated to where it it kind of forms like a slight curve uh let's see from here this looks like it's going to be a tail cowling piece and I flipped it towards upside down we're just going to snap it to the other side of this one by one piece so once that's placed we're going to do the same for the other side uh I'm not gonna have to explain it all over so I'm just going to throw this together real quick but yeah I think after those uh those hope Tech um pieces whatever these things are called The Hope Tech uh cross brace I think that's the only other piece that you might have to go visit another ship technician to be able to uh to have that piece available all right one more piece here all right so now this piece is actually going to go it's going to snap here once we get onto the other or the next layer and then same thing with uh with this grav drive it's going to snap to the back end of this but I gotta place the next level of pieces so with that said we're going to be moving on to the next layer all right for the next layer I'm going to be taking a tail two by one mid piece and we're going to be snapping that to this uh this cargo hold once that's placed we're then going to take this day most piece we're just going to snap it right to the bottom of our two by one here we're just going to place our other half piece this is also a Teo two by one mid piece I'm just gonna snap it right in this little section here all right and then we're just going to kind of work our way from the front of the ship to the back so we're going to start off by placing the Deimos belly piece we're going to connect that right to the front of this two by one piece from here I'm going to take the Deimos Wing a piece we're just going to connect that right along the side of this two by one piece then going to take a demo swing C piece connected to the next available spot and that's going to be followed up with a demo swing B piece go right next to it from here I'm going to do a demos haul and we're going to connect this to the the top um the top portion of this this fuel tank piece then I'm going to take the Deimos Wing a piece actually I have to move this out of the way real quick we're going to connect this to our reactor and then from here this should allow me to place the grab drive right in that spot we're going to repeat the same steps on the other side so once again it's gonna be the demo swing a piece followed up with the C piece then the B piece the Deimos Hall foreign piece all right now at this point we're going to jump over to the engine so I'm going to take a demos Hall piece that's going to be placed in this midsection and then it's going to be a tail cowling right in the front you have a problem placing it there we go all right and then I'm going to take this demo swing C piece and we're going to snap it and connect it to this demos Hall piece so it's going to kind of run flush with the other piece then going to take the Thruster array just connect that to the side of the Deimos Hall piece and then let's see the equipment plate we're going to connect right on top of the the Stamos Hall piece I think that's going to finish up for that side so we're just going to repeat the steps for the for the other engine do this real quick which there's a way you could speed up the uh the movement a little bit because I'm doing this with a controller so it takes a minute all right and then we probably should place our guns so this is going to be a ke 49a Auto Cannon so I'm just going to snap this to the top portion there it goes top portion of this demos Wing piece we're going to do another one on the other side there it goes and then I'm going to take this can be a disrupter 3340 Alpha beam and I'm just going to connect this right underneath right below that first gun and then let's see this is going to be the fulminator 8000 suppressor this is going to go on the other side right underneath our other gun here we go all right and with that placed I think we're ready to move on to our final layer all right so I'm going to take a Stroud two by one piece and we're gonna snap it to where uh the one side is connecting to this Deimos belly piece here maybe taking this Armstrong 10r cockpit we'll just connect that right to our two by one then I'm just going to go right down uh right down towards the back of the ship so we're gonna go the Deimos cowling do another demos cowling but rotate it to where they connect you know at the uh the lower section then gonna do a Stroud eklin two by one piece again follow up with a demos cowling and then a demo spine piece and I think that's demospine a piece let's see so from here let's see this Nova radiator just gonna throw one on both sides and these are gonna go uh on the left hand side of this this two by one piece so more towards the front of the ship because this back portion I'm going to be connecting these hope Tech the cap A's just gonna be placing those here and here at this point we take in a see this is going to be a Stroud eklin connector Pro Docker the top one I'll be connecting that to the the left portion of this two by one piece let me putting a shield generator on the other portion this is going to be a Sextant Shield systems the warden SG 400 Shield generator just throw that right there we actually don't have too much more to go we've taken these portholes I'm going to be connecting that to the uh the left side of this two by one piece we've got another one that I'm going to throw on on the other side and then the last two pieces they're both going to be these demo spine D pieces so I'm going to connect one here and I'll connect the other one here and just make sure you rotate it so it forms that Archway but uh with those placed that's going to complete the build [Music] oh [Music] foreign [Music] [Music] I don't know [Music] [Music] [Music] [Applause] [Music] foreign [Music] foreign [Music] [Applause] [Music]

Channel: I BARDEN I

Views: 87,842

Keywords: starfield, firefly, serenity, ship, spaceship, tutorial, how to, build, no mods, barden, builds, barden builds, starship, best, epic, amazing, guide

Id: XtrcjAICrdA

Length: 15min 56sec (956 seconds)

Published: Tue Sep 12 2023