[SOLVED] GNS3 and GNS3 VM 2.2.14 on VMware Workstation Pro - Error When Connecting - Not Connecting

okay now you can see the ip address of dns 3 virtual machine is 180 168 255 128 and the gns3 on windows is not connecting the gns3 virtual machine look at the state discovery or connected but is gray and it's not it's not green it's not connecting go to command prompt and try to pick this ip address 182 168 255 128 big 182 big 182 168 68 255 128 128 and now request timeout ping fails okay and go to edit on dns vmware workstation go to edit virtual network editor change settings yes you need administrator privileges and you will have three interfaces bm net zero visa bridgette bm.net one host only and vm net eight not okay and okay and add network okay for example bmnet2 okay okay a new uh a new virtual network net 2. okay very good bm net 2 host only okay should be host only and look at the subnet the subnet is 180 168 1 168 190 zero subnet mask 255 to 55 to 55 zero is a different subnet a new subnet 182 68 one knight is zero okay at another network and for example vmnet nine okay okay and set to not okay and the message is cannot change network to not only one network can be set to not okay so this is vm net 8 is not and remove this okay the alt interface that is not working remove network and remove vmnet1 okay remove bm.1 remove the alt remove old virtual networks and you will have now vm net 2 host only and bm net 9 to not okay and look at the new subnet for bm net 9 182 168 147 0 192 168 147 0. and go to nut settings and be sure on dns settings is auto detect available dns servers okay or or you can configure manually here you can use dns servers available dns servers manually but i will use autodetect okay okay remember bmw only bmnet9 not apply don't forget to apply then okay and go to dls3 virtual machine to 214 in my case settings and the network adapter is host only and network adapter to not okay be sure you have these two configurations network adapter hosts only a network adapter to not okay close gns3 okay very good and go to control panel network internet sharing sender change adapter settings you will have refresh and you will have [Music] you will have bmnet2 properties ipv4 you will have this ip address 192.168 one id1 okay very good and bmnet9 properties ipv4 182.168.147.1 okay and gns3 okay and ethernet zero is not configured please manually configure by selecting network entry in menu okay go here settings network adapter host only use custom and select bmnet bmnet2 host only and for not use custom and use bmnet9 for not okay and again cancel okay close gns3 okay close uh power of vmware workstation and again open gns3 and now look at this the new ip 192 168 147 128 okay and cancel this and look at this the gns3 built-in machine is connected server units free builder machine version 2 to 14 running on linux very good and here [Music] from your pc pink to to this ip address 192 168 147 128 to verify 192 192 168 147 128 147 128 enter success now so that's why this is green is connected another test ping to internet from your pc okay use ipv4 use ipv4 success and go to gns3 virtual machine enter shell select the shell and pink to google.com connection to internet control c google.com and very good controversy to stop thank you very much you

Channel: Christian Augusto Romero Goyzueta

Views: 20,220

Keywords: GNS3, GNS3 issue, GNS3 error, eth0 is not configured, GNS3 VM, Error When Connecting, Not Connecting

Id: X18WAOSp4YY

Length: 9min 35sec (575 seconds)

Published: Fri Oct 02 2020