Sig Sauer P365 XL Romeo Zero Optic Install

[Music] hey guys still mulling with se legal carry we train people to get a CWP in the state of South Carolina if you need to see WP please look us up online at NC legal CARICOM no friend of mine came by today and he brought over his cig p3 65 XL it is already cut for an optic and he just got this in today he got it as Romeo 0 so we ripped it open here so of course you get the Romeo comes with it it's plastic very very lightweight very small no bottom to it so the battery is going to insert right here just take a look at a glass on that it comes with two sets of screws mounting screws and one set is the cig p3 65 XL screws and they are actually a little longer than the other set there's another set in here in m4 and then these are the m3 here so we're gonna use the m3s they're actually marked for the 365 XL those are ones with battery size for this thing is a 2 CR 1632 on your battery and it comes with this small piece of 3m tape here it's hard plastic underneath here is sticky on one side really no instructions in there tell you how to use it so just looking at it we're gonna stick this to the top of the firearm we wouldn't want to actually put the sticky part on the optic because then you couldn't change the battery out on it correct first thing we want to do is clear the firearm so we've cleared the firearm and we're gonna take it down so we slide locked it take it apart we won't need the base your grip will set it over here right here two small screws right here so the sig 320s you have to take the extractor out and the extractor spring in the back here you don't have to do that you can see the two screws there here so I'm using a CRV 5/64 5/64 is what I'm using here so we're just going to insert this in here and we've already broke these loose so we're gonna pull this out these are some pretty long screws holding this in if they're really small screws but they are some long screws holding it in so I'm supporting the rear sight because the rear sight is what actually holds the optic plate in place these screws go through the optic plate and into the bottom of the rear sight so we take these two screws off we'll turn them over so here's your two screws that are holding it in set those down now your rear sights your rear sights come off and then your optic plate lifts up so now that we've got that off we're gonna clean the top of this a little bit top is nice and clean let's put our 3m on here let's make sure we got it yep so the corners didn't tear off we'll make sure these corners come off of this we just center that up drop it right on there just kind of mush it all in place so we've got a 3m plastic on there and we want to put our battery in the battery goes in like this so you're plus your plus side for your battery faces down it faces down towards the top of the slide okay so this goes inside we just drop it right in the bottom so let's do it like this let's do it this way and let's just set this on top of it this is just not one two but since the batteries just falling out of it there we'll put it on the upside down and they won't turn it right-side up okay there we go so you can see it fits on there actually fits on there really nice good and tight fit there so you did a great job machining and making it let's set it down so we're gonna use the m3 screws that come with it all right pop these out hit the screws out there all right so cigs already put some Loctite on them here so we'll just drop these in from the top let's start that a little bit now remember we're just securing it okay that's all we're doing we're not we're not cranking down on it yet we want to crank down slow one side than the other side remember these are fine threads so when you're starting this nice and gentle make sure it's gripping and it's pulling in there properly all right so it's starting to tighten up okay so before we actually tighten it up let's just check it out make sure we've done everything properly so its own you can see the dot all right so we got a snow here we go tighten up one side a little bit jump over here tighten up the other side oh that one had a good bit more together that's why you do it slow one side then the other jump back and forth so I can feel it snugging up now sig I don't put too much pressure only here because Sega recommends that you put nine inch pounds nine inch pounds so we've got our wheeler fat max here right fat wrench fat wrench and we're using the same we're using the same attachment here do that we use to remove the screws from the factory so now we're going to apply a little more pressure there we go it's snapped and there we go just check it so didn't take much at all to tighten it on that is good and secure though there's virtually no weight to this thing at all you almost couldn't even feel it in your hand while you were holding it really easy install there so we didn't have to take our spring out for anything so we'll just slide this back together and slide lock it open with the back trigger function well now that looks like it's already setup when I get my sights on this firearm it is Co witnessing that red dot is dropping right in front of that front sight you can see it comes with a notch in the rear here so your your rear sight has a notch in it so it still lines up with your front and when you set it in there I don't think it's going to require any adjustment well that's the first time I've ever put one on that didn't need it Justin but we've still got a bore sight here so let's drop a bore sight in it and let's see let's see how it works see how close that is now you're bored sites aren't a hundred percent either okay now I've used this foresight a good bit I cited one in earlier and I was about eight inches off to the left in it and I had to adjust my sights but this is exactly where I would have had to put it the other one earlier so I think it's actually sighted in it's ready to roll straight from sig I can't get the bore sight back out of course well sig that was a that was actually an easy install really quick really fast not a lot of tools needed looks good on the gun really doesn't change the weight at all in it it looks like it came preset and sighted in ready to roll so remember folks be responsible adult secure your firearm just don't push the responsibility on phone to a child take care guys you

Channel: SC LEGAL CARRY

Views: 63,547

Rating: 4.9140224 out of 5

Keywords: sig sauer, p365 xl, xl, 365, sig, sauer, romeo zero optic, romeo, zero, optic, refex sight, how to, how to install, pistol, handgun, simi auto, remove rear sights, remove sight plate

Id: AaGA2HaMljw

Length: 9min 14sec (554 seconds)

Published: Sat Feb 22 2020