SIBOOR Enderwire Build Part 9: Electronics & First Boot

Video Statistics and Information

Video
Captions Word Cloud
Reddit Comments
Captions
[Music] [Music] [Music] [Music] [Music] [Music] for [Music] [Music] and we are live hello and welcome everybody let me know let me know if you can hear me and see me all right I didn't check the audio levels but I think they're set from last time so they should be good also apologies in advance if I see more distracted than normal they're still building the house across the street and the house beside us so they've got a full Landscaping crew that was digging up uh or Tren ing for the the irrigation and then next door there's just power tools going off so you guys probably can't hear it with the with the uh filter that's built in but I certainly can and boy is it distracting so that's what's going on that's what's going on here uh let's see who's all here we got brick Bros red five how's it going uh Benny's here ditto's here Simon's here RS makes St say sky I don't think I said Sky Craftsman's in the house Aaron's here pretty sure I said RS I can't even I've been reading chat so I can't which one I just said dark th dark th chiko uh delmare how's it going Simon yes it's been it's been quite quite the week quite the day uh a few things I did update so I updated member badge for 24 months so I don't know that anyone's at 24 months cuz I don't think we've had memberships for 24 months but uh YouTube it I thought I set it for every single month but it looks like they basically go for the first I think it's like 1 2 3 4 4 5 6 12 24 and then it goes a year after that but I did update the badges so we have 24 months I also spent quite a bit of time and I've got I'm not going to play them all right now but I got some pretty awesome uh sound effects let me if you can hear that hopefully you can hear that I I didn't change any other settings but let me know if you can hear that uh nice and delar thank you for 21 and 22 months yeah you guys are almost right there hey ion I am I printed out the plate for the stealth press last night and initially was like this is a big ABS piece um I did it in a carbon no glass filled abs and because it was a new printer I was testing out I went with a brim and the brim did not play very nicely with the thin line so it's almost done reprinting again without a brim it's looking great so we should be ready to rock and roll two weeks from today we are going to be building the stealth press on stream which will be a lot of fun okay you heard it okay sweet I don't want it to be super loud my goal isn't to scare anybody uh yeah so we got that we got also for squirrel moments I got a couple more but I'm not going to show them right now but I've been saying that we needed some more sound effects I spent some time and really thought like what like what fits into these streams and I'm like squirrel sounds and punching things had do again and I got again a few more but we'll we'll see those we'll see those when they're ready uh the sound effect sounds like Pikachu yeah it's supposed to be squirrels squirrels talking or Chipmunks or squirrel something along those lines a small rodent uh let's see RS thank you for 18 months not at 24 months yet so yeah I think the maybe delar might be the long 22 months might be the longest that exists so anyways we've got 4 hours today and the goal is to wrap up the cybor also hello cybor thank you for joining us uh cybor Ender Ender wire build uh we won't be doing any panel stuff today the plan is to revisit that in about 3 to four weeks time when I've got some uh when I've had some time to play around with this before we enclose it and things get a little bit more difficult to access the only things I've done since last week are I did attach the bed uh so bed was on but there was no the magnet was not on so I did that I I also used a a punch uh to punch holes for the screws and I I made a stencil and everything and my measurements were slightly off so the screws are like let me see if you can see uh let me tilt this up really quick they're slightly off which is a bit of a bummer um considering that I spent the time to can you guys even see it they're not terribly off like I mean they're they're definitely off so you can see it's not centered but it should still make it where if I ever need to remove the bed it's at least possible uh without having to hack into the bed ideally I should have um probably done that before I attached the the bed itself but but it'll be it'll be fine uh with the way this is morning Phil so yeah I put the bed on and I think that's it I don't think I've really done anything else since we picked up uh or you know pick right up where we left off last time I did want to run through really quickly the electronics because for anyone building this that is using what the kit came with for this uh I want to at least sort of sort of explain that so here's a diagram of sort of the electronics layout if you go if you have a stock Ender uh Ender 3 Pro or Ender 3v2 they PL they have you using the default cral board along with a Raspberry Pi the uh power supply that's included with your you know Ender you've got a 24 volt uh to 5vt Buck converter which basically just takes 24 volts from your PSU and then outputs 5 volts which is then used to power that Raspberry Pi then you've also got a small board called the Clipper expansion and that just gives you the additional ports you need I think it's mostly fans is really what's um I think that's really what's the limiting factor over the stockboard so this is what the Clipper expander looks like I'm going to hold on to this cuz this is kind of cool and I I might very well might find another project that I can end up using this for but yeah it gives you quite a few different inputs um like some fans and I think I think someone said a f th Mis as well it looks like so yeah that but that's what you'd be using IF if you were using I just got one of those uh from shammy oh what are you using uh what are you using yours for Delmar so yeah and then I I did find this is the closest thing I found to a Stocker 3 board and this is just a SKR uh mini E3 V2 so why is my someone's calling me let me make sure it's not someone from boisey is calling me I'm not going to answer go to voicemail last time I answered I answered yesterday thinking it was something related to the fence that I had ordered and it was uh this this guy's been trying to sell me web services for like 2 years I asked him to take me off his list I blocked his number but it it was calling from the same state I ordered the the vinyl fencing from so I was like oh it's the fence guy nope anyways so I believe that if you use an SKR uh minib board I'm not sure if you you might have enough inputs on here but if you don't again you can pair it with this but what we're using uh because this printer was not a stock Ender 3v2 it was already it was already upgraded um is this guy so this is a um this is a big tree Tac E3 EZ board so it has the same mounting points as the Ender 3 but it uses a CB1 or cm4 I'm going to be actually pulling the CB1 off of here and replacing it with a cm4 uh so we'll be doing that and then this this acts as your Raspberry Pi or not I guess we won't call it that but in place of your Asberry Pi it has both your Clipper host and your uh MCU for all of your hookup so this gets rid of the need for a separate R Pi um because again it's it's um sof s so so it's on the board itself and it also gets rid of the need for the 5volt butt converter because it's being powered off of the same 24 volt so this is what we'll be using uh which you know is should hopefully be a little cleaner but I would be using what the kit intended it had I had that I just don't and so we might as well use you know again what's already pre-installed on here more fan on my enclosed oh sweet Sidewinder X1 the skr2 only had the three fan ports okay so yeah you probably I'm trying to think if you would it might be enough than the SKR cuz you got one fan two fan and then the fan on the back so you might be good with the SKR uh board for this particular build uh still limited to three pwm fans on that board if you need more fans the expander will help yeah uh what's my favorite printer I don't know that I could answer that uh I would say the printers that I currently use the most are probably uh the p1s the 2.4 man p1s 2.4 I throw quite a bit of stuff at the V minion those might be the three that get the most sort of action right now yeah those are but yeah I it's a tough question I don't I don't really have a favorite I like kind of different printers for different reasons okay so let's start off by just pulling we're going to remove these two screws so I don't have a heat sink for the cm4 I don't think I don't think I can use this heat sink for the cm4 I don't think it actually needs it while the CB1 does need it so let's go ahead and remove the two screws folding the seat sink in place we'll pop the CB CB1 board off which is Big text board we'll put the cm4 on hey James welcome good evening let's do that uh I have Nevermore to help chamber temps in circulation oh nice where do you have the niore mounted on that printer do you have a if you got a photo post a photo somewhere I'd like to see [Music] that is there a reason you're swapping out the CB1 with the cm4 yeah most of the cv1s that I have are like original batch I think they sent me three really really early on and the wireless is just spotty on them so that's that's the main reasoning why um because I've got right now I I have a decent router it's um I can actually show you guys it's on the ground it's on the ground in here let's show you myz there's no furniture to put things on so this is what I'm rocking this this is my clean internet setup so I've got a uh Motorola modem uh that does I think it's only 900 down I think it's 900 both ways possibly is like the max I can do and then I've got it's a um I think amplify is yeah so amplify by the same company that makes the um oh gosh the mesh routers that everyone uses that's more of a like they're more of a uh Ian people have them for residential but they're definitely for business udemy is that what they're called I think yeah I got this guy and it works well I don't have it can do mesh like you can get the mesh adapters I don't have any right now but I've noticed that depending on where I am in the house the CB ons either work really well or they don't work really well uh yeah okay yeah ubiquity or ubiquity is is the one I'm thinking of also this showed up so we do have a second uh workbench up here so once the IKEA furniture shows up back here we'll have two stats we'll have this one I'm at right now and then we'll have this one over here which is pretty sweet so little by little uh the enclosure is Jank yeah ubiquity I was what happened was I think I was using I think I was using the isp's hardware at our like two places ago and it crapped out on me and so I I had to do research on um networking stuff off of really spotty Cellular Connection and so I know that the a lot of people swear by the again ubiquity or yeah I think it's like you say it the the ubiquity stuff but it seemed much more complicated than I really wanted to get into and with the amplify stuff it's sort of their like I'm going to call it beginner beginner friendly home user uh setup and the app is awesome like it lets you quickly create alternative guest networks and quickly check things boot things like it's it's nice I've been a pretty big fan of it so I've been happy with it but yeah so anyways that was a long discussion the reason why I'm getting the CB1 uh getting rid of it is it's the ones I've got are earlier versions and the wireless on them just is not great so now that I have an actual Raspberry Pi um to replace it with that's what I'm going to be doing I am curious to see what the CB2 is like whenever that ends up coming out um this is going to be I almost think I need a small Flathead to kind of pop this off I'm curious to see when the CB2 ends up coming out because I think that's supposed to be a lot more like a I three if I'm not mistaken hey Lisa are you going to do a proper bigu install for the house it makes a massive difference over amplifier I don't know I don't know I know quite a few of my co-workers run that and um with how many things with how many things I've got going on right now I don't know how much I want to dive into all that networking stuff maybe eventually for now since I've got this and it works well I just don't know if that's what I want to do okay so the CB1 let's let's actually take a quick look at it um the CB1 is designed in the same exact footprint as the compute module oh this this got all jacked [Music] up this little thermop pad got up pretty bad C2 oh it should be close to a pi4 okay so pi4 is what it's close to so yeah whenever that comes out I'll definitely give it another go um the currently I'm running the Manta m8p on the um Merc build and the internet on that also the wireless has been pretty spotty pretty spotty as well so yeah it's got the exact same footprint as far as length width and you know thickness is near spot on as well um but the connections are the same so we should be able to just pop this onto the board and we'll have to we'll have to to re flash it uh we flash it slightly differently since I think we're using the ra I think we're using Raspberry Pi imager flashing that over to micro SD card popping it in and then it will um basically extract the OS the first time we run it so we'll see I've never I've only used cv1s with these boards all right so it should be perfectly lined and yep it snapped on interesting it looks like the CB1 has a antenna connection looks like it has an antenna connection I wonder if it's needed is anyone is anyone running these and no because I mean with a raspber pi it typically doesn't need it so for now I'll rock it without it um I guess if I have to I'll add an antenna but I was hoping that the wireless would be adequate enough to not require that and then I already printed out this this was something I found uh you change the hot end or just going I'm going with the hotend for now if it becomes problematic I've got a few different options we can choose from but for right now I'm just using the stock hotend with the Clone clone CHT nozzle on there you should use the antenna I wish I don't think the CB1 oh not sorry I don't think the uh cm4 is actually came with an antenna so we'll we'll use it and then again if it ends up being an issue I'll pop on the antenna and we can find a a place for it down below yeah this was this was just a mounting bracket I found over on printables tm4 doesn't need it okay we we we'll see how it goes again if if I'm noticing spotty connection or it's cutting in and out then I'll absolutely try the antenna but right now since it didn't doesn't ship with it we we'll just use it as is um but yeah this was just a mount I found over on printables if anyone ends up wanting to use this I will uh I can post a link for that so let's go ahead and flip let's go ahead and flip this over um so we'll probably just put it on ins side like this we're going to be spending a lot of time with this printer on its side today let me clear out some space as well uh CB1 should have an connected I run M and CB1 combo on Trident yeah I do have um let me I know in the past I've always ran the antenna on the CB1 it looks like yes on the on the Mercury build I have over here I'm also running it the CB1 still and it does have the antenna this one didn't have it plugged in but I think that's just because I I probably took it off when I removed the um when I removed the chip or when I remove the board from the printer hey PF hey Donado okay so let's start by attaching start by attach attaching this board I think it's going to go right around [Music] here yeah it should work out well I'm try to get as close as I can to this side so that way there's at least a little bit of fan blowing over the um the board but this is definitely a bigger board than the stock Ender three board on here so let's grab let's grab some M5 bolts uh my bad not integrated onto the PCB but better reception uh gotta out of box C1 suck so hard there is now a recommended mod for pad 5 and Pad 7 a drill hole in the side and add an antenna off a Wi-Fi router interesting yeah the biggest the biggest complaint I have with the CB1 by far has been the network connectivity has been me not not very good again some of them work pretty dang well I just I need to probably go through and figure out which ones those are because the earliest batch had issues and I think they they fixed some of it with a firmware update but some of it they came out and said was Hardware related okay so this is going [Music] this is not going to be able to go on the bottom so it's going on the Outer Outer lip here let's go like this I planned on having I got some funny news i' planned on having a trident video out next not this Saturday but next Saturday uh not funny I won't go with funny but kind of funny because I'm I've I know that like I know that that's what you need to watch out for and I've even like told other people like hey be careful when you're putting it back together I think alien was the one that originally was like hey watch out for that so I always think about it every single time and I'm pretty sure I checked it and it looked like it was aligned perfectly but it wasn't so now now I'm uh figuring things out I'm planning on throwing the kraken's already in there uh but I'm trying to figure out because because of what I've heard about the minimum current output I I think I have to convert the printer to can boss so the Trident video is getting pushed back a bit I guess is long story short what's happening hey Luke uh do you have any big plans for the new stream room setup uh a lot of the same I I mentioned sort of this before but the background is going to be near identical so there's going to be like those Peg boards that we had in the previous place but now it seems like we'll probably do two on top two on bottom so four of them then there's five Alex drawers from Ikea coming that will be lined up here that the game plan is to do grid infinity and all of them so that way I've got really nice organization then there's a butcher block going on top so there'll be a couple of printers here uh LED sign will be right here so similar to before and then this side um it's I went with the same kind of workbench so behind this set it's going to be three billy Ikea bookcases that will hold pretty much all the filament that I think I have in those three racks um I might add LEDs in inside of the bookcase to sort of illuminate the the uh filament maybe I I'm trying to think about how I can do that clean and I It's Tricky um but aside from that figuring out maybe something with the cameras I've talked we talked a little bit about some sort of ceiling mounted system for me being able to slide the overhead camera from this station over to that station and then I would like to do I'd like to print out almost a full like full size modbot robot the mascot and uh illuminate like have LEDs inside the eyes so he's like sitting or not sitting he'd be standing over here I just don't know that I'll have actually the space to do something like that but it's going to be it's going to be sort of similar I really liked this sort of Workshop I don't know if I'd say minimalistic but sort of like Min like workshopy look that I had at the previous place so that's sort of what I'm going for here is just for replicating that but making it a little bit bigger since we have a bit more space so um CB1 is a bit underpowered needs to be cooled otherwise x uh weirdly antenna is a bit mess I have more than one complaint cons are smaller less crap Electronics pay in price oh Pro I think PR is Right smaller and less crap in electronics pay this build motivates me to work on my Delta 3 printer I'm working on I'm designing everything and I'll buy the parts uh on nice I've done that kill LEDs oh that makes me feel a little bit better that it's like more common I wish I wish there was a better way to ensure that it's aligned because when you're putting the when you're putting the stealth burner front plate onto the back plate you have the two-part PCB you're like you're kind of looking from the side right and as long as you like you almost can't like when the male pin headers go into the socket you like can see it going and then right when it would actually make that contact like you can't really see anymore because the cover is in its place so you have like a tiny tiny Gap where things could slightly shift but I've taken an on and off quite a few times without issues and normally as long as the plastic uh looks like it's aligned perfectly or good in this situation to me it looked like it was it was aligned fine uh but when yeah when I turned on the power for the Trident and I saw a little like a tiny bit of smoke come out of the bottom and I'm like oh no what the heck was that and yeah the spider board just seems like it's dead it's just it's dead so it's bummer um killed a few there's a pile of smoked boards in my office oh no I've been pretty lucky I I really have I the main boards that I've killed um the the main the only trying to think what boards have I killed as side well now again this is we're starting to I guess our tally is increased one we'll add one to the board but the main other one as kind of sucks to kind of sucks to get you guys can't see what I'm doing the main one I killed was the SKR uh from the the switch wire that was when we moved any everyone remembers I I said while we were moving the moving box fell which caused maybe I'm not using the right size no this has to be the right size driver um the moving box fell and that caused the tool head to slam to the other side which created a you know backwards current into the the driver so it's the driver that died and because the drivers are um welded to the board or you know on board I guess not welded then um that was all that was all she wrote but I think that's the main we not tightening there we go I think that's the main thing that I've killed up until now now I've got the spider board on there unless someone else remember is there anything else I've killed I feel like there's been a few times where we thought I was going to kill something uh and it somehow everything worked out so the only issue I'm seeing right now um can you guys see this kind of yeah so the wires all come in through right here which just so happens to be where the micro SD card is and on this board I I'm almost positive this this is the slot that it sticks out a bit further than I'd like and so I don't know that I want the wires um going manual focus I don't know that I want the wires pulling or or rubbing on the micro SD card because I feel like it's a pretty fragile um fragile little card so what I'll probably do is I'll slide this let me loosen this here let's slide this up a hair bit more to give us a little bit more clearance there we go I think I'm happier with that I'm not entirely sure also um as far as Cable Management goes down here I I don't see I don't think the came with uh raceways it might have if they got moved I don't know but so I'm not sure if the wires are all supposed to just kind of be loosed down here but for now we'll just get things plugged in and then you know um cable management is something that I'll sort of figure out I guess later on what we want to do with that okay so that is in the next thing we need to do is attach the power supply which is going to be going going to be going right here or over on this side uh you killed the PSU Mount I did that I did do print one of the zip tie mounts from the Trident [Music] repo oh yeah that's not a bad idea yep yep the ones that just go in here then you twist sideways and they've sort of create they've got a bit of a loop similar to like the Steve Steve's V HB ones that he has yeah it's not a bad idea I'll probably end up doing that horizontal surfaces breed clutter I agree uh afternoon first time watching hey Richard thanks for joining us should have had a blocker pin like uh USB cables on PC so it's definitely oh yeah that would be cool yeah a block a blocker pin is a great idea nappin most of those kill the ldo breakout board before the octopus I I was actually I was pretty surprised that it killed the spider board I I thought initially too that if I had damaged something it would have been the the toolhead board which you know still was unfortunate but wouldn't have been as big of a deal but nope we went we went all we went hardcore and just killed the whole thing okay we are using the stockboard I don't know if I printed out a a cover for terminals did I I don't think I did I we'll have to do that after um let's see so here's one of the mounts and we've got two more it looks like how's everybody's week going we've got what 48 hours less than 48 hours of we've got roughly what 36 hours well it depends on where you are I suppose of uh February left all right so there's a total of three and we need M4 M 420s for these guys let's see m420 M 430s are they really M4 or the M3 they look like M4 h oh there we go uh okay uh use a twisting Clips okay sweet yeah I'll print out some of those just a thought on the man I'm missing put let me catch up on this you twist in you should do the Ender three to Ender 3 n that's on the list uh nuzi I'm waiting for it to come out of beta put the bottom panel on and consider the ca's manage yeah I think I I need to pop open the uh the switch wire build I'm curious as to what I did on that because that's a you know it's going to be a similar setup I'm wondering if I if I sort of did something along those lines I'm like well it's covered and everything's in place I like to do at least some level of cable management since this is the printer though that we're planning on running the ercf um V2 on eventually I don't know how how exact I want cuz I'm going to have to probably run some more wires why are we not you started on the ERC fb2 right Luke how's it going so far okay all right this goes like this no uh put the on just a thought on the modbot Statue if space is a concern could you make him wall mounted and have him look like he's bursting through the wall so that's a super cool idea I I I really like that idea uh dark third I probably need somebody well I can play around with like crack uh crack that sounded weird I can play around with crack designs for the background of it to see if I can make it look good i' probably need someone to sight um remodel the character to make it look like he's in more of a bursting through position the only thing I don't know it could potentially go in the center because since the um since the you guys can't see I'm since the Alex drawers are going here and then there's going to be four Peg boards and then the bookcases over here that are that are holding all the film will take up most of the wall there's going to be a gap at the end of the peg boards uh to wherever the first bookcase starts and you can possibly go there on the wall it's like the only real like open open Real Estate on this side of the wall but that's not a bad idea and that would probably look really cool I just have to figure out how to get the design and how I'd want to execute it uh use a twisting Clips my under wire I've seen Port dust covers recently on printables Port dust covers nice PS2 is M4 CU City be like that they're actually mean they're meanwhile this is a meanwhile power supply so must be a meanwhile thing uh good week for the wifey is back home from 3 days business trips I cannot wait to finish my workshop I saw I I meant to say something nice but I did see the photo that you posted it looks like it's really coming along also I did look at delmare Delmar earlier was talking about 3DO gosh why are we why are we fighting me on this 3DO released some carbon fiber the ASAS or abss I I can't remember right now but either AB abss or ASAS and they're in color and they're pretty freaking cool so if you are in the Discord he he posted a few like the test prints um so you can sort of see how they look and they look really good let's actually so before I tighten these I'm going to lay this down so that way it's they're flush and not at an angle since they they're only held in with one screw and they pivot let's loosen both there we go so now they're flush against the hard surface and we can tighten these flip around the other side and we've got our final piece which is going looks like right here this one's just using a button head M4 by six uh tinted okay tinted as it's an ASA carbon fiber doing is try and rebuild with the purple awesome uh you have a cool W uh mbot clock you put on that wall I might if I'm going to put it up on it's probably going to be on this wall over here so I can actually keep keep track of the time I do have the the clock though it's in the it's in the closet right here I need to put Jax up actually and now that he's got his room Dela can you stop looking yourself please thank you she says no this is my time okay there we go before I tighten this I'll do the same thing drop it down loosen it here oh I guess it's going to have some some Wiggles so let's hold it like [Music] this there we go uh we got the gearbox completed and working on the carts now nice that's awesome you're you're a speed Speed Demon or Speedy Gonzales with your builds man all right so for this it looks like we're just using M5 oh so this one this just slots let's see so this is slotting so it looks like this just slots into here maybe nope got to be the bottom there we go and then these are going to go you guys can't see what I'm doing I just picked up my first roll of AA uh Sparkle Fanta purple I haven't used it yet but it looks sweet oh it's um it's Sparta filament I've never printed with Spa filament but it's definitely something I've seen recommended a lot and it they make some gorgeous colors okay m510 so we need more where a where hopefully these will work I think these are the shortest m510 yeah m510 are the shortest bolts we've gotten here so hopefully those will work and then I should have a couple of these Rollins left let's get a little more a little more [Music] energy there we go okay dropping these in now these do not stay very [Music] well wow I don't know that you might be better off just using I might just use te nuts for these or let me check let me see if the ones that came with a trident kit or any different but these are just not not stick at all so here's some we've got some Hammerhead nuts in case we in case that's all like the best we've got but let's see if these are any [Music] better okay so these are leftover from the Trident [Music] build maybe it's just this Extrusion I don't I don't know different type of Extrusion video game Boss mode yes yeah we'll just use our head Nets then hey s whoops That was supposed to be 3D my nuts hey zombie good afternoon hey [Music] Jack yeah so we will just ahead and sort of [Music] so for anyone that isn't in the Discord or hasn't seen I actually posted what our schedule is going to be as far as streams go for the next roughly 30ish days so next week we are going to unbox the two trees sk1 which is a corxy clipper printer with I think I think it's three it might be four it does bed tramming which is cool uh so we're going to play around with that we're going to box it just see what it's all about it'll be a real laid-back stream then the next stream we are going to be building the stealth press um which is a Heat insert Heat insert tool um which I'm looking forward to I've always just sort of done done everything done it by hand which has worked well for me but it'll be nice to actually have a um device that'll help help make sure they're they're straight so we're going to do that that'll be one stream just assembly kind of hang out and then the week after that we're going to unbox a Tom gr T300 so we it's also another Clipper printer it's a Clipper bed Slinger so we'll play around with that for a bit another sort of chill stream then we'll go back to this printer for a just wrapping up things basically putting the enclosure on um and printing and I don't know whatever else we want to do maybe sort of like a recap of the build and then whenever it comes in after that we're going to be building the Milo Mill so that'll be I need to get the parts printed out for that that's going to be the next sort of big build unless there's a delay and then I've got a few other few other potential options that's kind of the kind of the scoop on what's going on the next at least month here uh that uh I've been interested in the sk1 yeah I'm curious about it it man I I haven't used a two trees Pinter since their um and it was they had a they were one of the first corexy printers I think I ever use let's actually just go uh that's the back end on YouTube that was when I created the like when I was checking to make sure that I couldn't create badges for like um I was checking to make sure that I couldn't make badges for like every month right that's what I was checking on okay so let's go here nope that's not what I want to do two [Music] trees yeah so this is the this is my last experience with two trees look at that I was a younger M I wasn't I I didn't have there was no children no I wasn't married that was when we were in our first first no second apartment this is in our second apartment before rep racks were even before pet Frack came out um but this was January 11th 2020 so 4 years later I'm pretty curious to see just sort of what this new machine is like I don't know what the heck two trees has done for the last four years um it's been it's been a really long time and I don't think they've really put out a whole lot of printers but yeah this was this was my last round with them which was a pretty early corxy considering uh like definitely before the bamboos and all of that and it had it had potential it it really did and if I remember correctly the extruder SL tool head was sort of where they just kind of fell flat it also was a canal levered bed but if I remember correctly I feel like it was fairly rigid for for what it was so you aged well dude thank you I appreciate I appreciate that it's always a trip like seeing an older video like that I'm like man I I really have gotten older hey Mark I I'm sorry I don't know if I said that two trees are great or a dis perfect hey Deana I got the blur for many years I got the blue bler for many years and that worked great just install bamboo lab hot in all my underwar nice have an sk1 here it's nice fast and solid yeah I'm I'm hoping for the best I I don't again I don't really know exactly what to expect but I'm I'm optimistic for For Better or For Worse I'm I'm optimistic so we'll see see how it goes all righty let's do some wiring here because again this is this is it this is the final final build for now and the final stream for now I need a Phillips head [Music] screwdriver oh you know what I've got no I don't know where that's at so let's loose oh these are already loose so I think they have yellow as Earth H black they've got let me see they' got color I don't want to guess on their wiring H wiring okay so they've got red is live black as neutral and yellow as Earth so red as [Music] live nope red is Al it's a little tight but that's not too [Music] bed I need a better this is hold a second that screwdriver is not wide enough to really grip that's way too big oh come on how get let me see if I can find May it's in here no I've got the lonus tech tip screwdriver which would be perfect for this but I don't know when we moved where all the bits for it ended up let me do a quick quick check uh this is stuff that was on my desk keep board stuff not there not there that's a bummer I granted I misplaced things all the time before the move but I certainly don't know where the heck anything's at anymore oh how I put [Music] it I might just have to use this kind of undersized screwdriver for now yeah I don't know uh how's Jackson doing he's doing really good yeah he's um he turns one on Tuesday which is just absolutely crazy yeah he's doing he's doing awesome I he got a bath this morning and he's doing really good I yeah he's he's growing growing so quickly too quickly it's but he's doing awesome thank you did cbor not include a printed part to cover the cut and the Extrusion so I would want those wires potential uh that's a great question I think that it did come with a cover let me see if I printed it [Music] that doesn't seem right that seems right but that doesn't seem like the right [Music] size yeah that's a good point the Extrusion is pretty sharp there [Music] um I imagine it's supposed to be one of these guys you're assuming Danel follow the logic of putting them in the handle oh no I I did put them in the handle just the the handle only holds so many and I went with um like Allen or hex uh so yeah I've got like the standard the standard ones are still in their pack I was on printing out something for it once they moved but um no I've got to find them that's mission mission critical number [Music] one so yeah this kind of fits like that but I don't nope it can't go like that so it has to go like this that's definitely not wide enough um so either either I goofed or or the sizing is just not right but I need to print that out I will print that out [Music] today yeah basically this cut me show it since the AC wiring is passing through here these edges of the aluminum are quite sharp and you just you don't want it rubbing back and forth it will it will definitely cause a break at some point so having a cover here is what you want but again this this is this is just short it it's by quite a bit so I don't know again if I printed the wrong thing on uh we'll link a cover in the live chat cool thank you yeah I'll get that printed out today thank you for mentioning that I wasn't thinking about that but yeah that's absolutely something that needs to be there oops let's drop it down a [Music] little [Music] oops nope it's not connect AC wiring wrong there we [Music] go hey zombie did you see the new stealth changer thing that came out in the last like day or two I don't know much about it other than that it's only for 2.4 and it's only for stealth burner right now and it says that the project was in inspired by a tap changer feel like you would be able to I mean other than tool head feel like you'd be able to more easily tell what the main differences are between the [Music] projects Okay so we've got AC in again those need to be covered ASAP um now we need to run we need to run 24 volts from here to main power so up top here um and I don't know see what cables we've got in this kit so we've got a couple of USB cables again this is intended to connect the Clipper expander and the stockboard so I don't know we won't be needing those we've got wiring for an adxl like just a traditional Exel not a USB one um I know people are working on the front moving dock for a while now oh interesting um is it isn't even the the tap changer that you have built isn't isn't he working on also a version that can lift um like up and down so that way you can work with a trident uh Hey on brakes I'm just dropping by to see your progress hey Andre uh yeah we're I mean we're basically done all that's left is plugging in things and and getting the config um config working but as far as the actual mechanical assembly it's it's ready rock and roll cool so we've got some wires we'll use these hey PF thank you very much for the five gther memberships let's see do I have any um no I've got just the classics I got this one pizza thank you ppf there's like 100 oh gotcha okay have you tried leveling your bed not not yet zombie I will though for you thank you for what is that 19 month thank you for 19 months zombie all right so we've got positive going into we'll just go to the very top here Delila Delila hey you got to stop looking yourself bro [Music] okay I think we only need that's all we're our wiring is going to be fairly simple since we're just using this one board this is negative that okay so I went with top top and third down and this is going to go through here as well and I said this could be a lot shorter um this could be a lot lot shorter CU I only need I mean basically that would be plenty um if I've got if I've got my Barrel pimpers somewhere here then I might just shorten this really quickly barrels are so easy to cramp um that's not feral this is feral and we need what size are these red I think those colors are different than the sizing I've got let's see that looks about right maybe one size bigger that's smaller this is probably the closest maybe [Music] blue napin thank you for thank you for becoming a member res is toxic yes yes hey hey the name of 3D Lisa thank you for 20 months uh posted allergy choose for Delila in mod chat okay sweet I will take a look this looks close to what it is let's try these let's try these blue ferals uh let's throw you back in there might be a little too big we'll see okay so we are going to cut this we'll give ourselves a tiny bit of slack but definitely not that much boom get our wire strippers ow ow feel good yeah fire strippers check the main thing stopping me from working on the stealth changer is that it's so heavy oh that makes sense it's big it's a 350 it's a yeah yours that's right yours is a 350 I get that that's sort of me with the vzy bot the V is so tanky I want to bring it upstairs so I can start trying to play around with it some more and figure out if I can narrow down or remove the artifacts I've been seeing but it's just so heavy um it's so heavy so to bring it in and bring it up flight of stairs is just not high it hasn't been high on the list uh true wait I'd be putting some tape or something on the sharp extrusions but I'm a paranoid man yeah I won't be running running like other than for the sake of this stream I will not be running this printer until yeah that works until I get the slot cover printed out there's a lot of things I'll play around with um AC is not AC is not one of them it's where I draw the line okay yeah those feel tight let's hopefully let's see let's lift up the AC wires so this can go underneath it like that and let's loosen where did you go screwdriver there's a Phillips I had a smaller screwdriver that was a Butthead and it apparently got arms and walked away there it is [Music] okay okay so positive is on this side and negative let's see so the issue might be that these ferals [Music] yeah it is it is so dark inside of this printer let me see if I keep loosening it there we go okay I just need to loosen them [Music] more there we go you are in come on I want I want to get them both at the same time there's one and two okay these are in let's tighten this [Music] down hey collie as the first print been decided on I don't think so I love the Micron plus ldo yeah I'm thinking about building it's it's getting higher and higher up my list I when I found out the so the if I'm not mistaken it's primarily using MGM 7s but the x is MGM 9 right zombie [Music] hey what's up PC slot cover can be yes yes slot cover you're not wrong slot cover could be first print can just be in pla that's that's a really good idea Lisa okay so I don't know how much the rest of the electrical stuff's actually going to do us any good um again since we're since we are not using anything from here we've got that's wired in we're not doing that uh I guess we do need we do need to connect a USB cable from the screen so it's a USBC let's do that really quick and then I'll just start connecting the rest of the wires in let's see [Music] USB stuff there we go mgn9h for Boop cool because I'm um something like that yeah I'm thinking of I have an idea I have a plan for this Micron plus aside from it just being a micron and part of that requires I believe mgn9 is going to work just fine okay that is a really long cable and this is is not the right cable okay really long cable it is so it's USBC so we're just going to pop this [Music] out see if I can do this there we go USBC in pull the cable through and then I don't know we'll just route it route it around here for now I'll have to figure out a way to clean clean this up we'll go under our AC plug and the that's nice that it's a uh it's a right angle so I I I do like that I have very little space right here I don't actually know that I'll be able to fit this without without um yeah I don't think I'll be able to fit that actually let's [Music] see okay so the connection's on the top this is on the bottom so it's perfect like that I'm going to have to remove yeah we have to we have to remove this this won't be an issue if you're using I don't imagine this will be an issue if you're using the stock board the crowy board and SKR but again because this is a wider board well it definitely won't be an issue what am I saying it definitely won't be an issue if you're using the stock board but because this has Clipper host built into it it's a wider board and so the USB ports are just oh I have to completely it's kind of a bummer wonder if I oo that might be an actual that might be an issue you I'm not sure if it's going to clear the fan okay let's let's completely remove this really quickly here I'm also going to go with Hammerhead nuts that way this is easier to get in and out versus these Rollins so let's check these out uh modbot breaks another board oh come on okay there we go all right let's remove remove this nut remove this nut let's get our where's our magnet our KB 3D magnet bam okay let's plug this into the bottom like so are we going to be out of luck or is this going to work okay dude that is [Music] [Music] tight I think it's just going to work um let me see if I move this up even further let's move this out of the fan way okay it's slightly better if we move it a little bit higher up what time is the giveaway or did I miss it nope giveaway opens in 25 minutes so it won't be we won't do the drawing for another 55 minutes hey brick Bros hey Alan uh in the Red Corner we have mbot in the blue Corner we have yeah we're just getting the electronics in and ran into our first first little complication just because I'm using a a different board that's wider and the USB connection for the screen it's a right angle but it's still um it's still pretty [Music] wide I I think this is going to work okay I'm just the Fan's not going to really be blowing on our board which is a little bit of a bummer so let me pull this out one more time I'm going to tighten the screws right here for this front [Music] skirt cuz they're still loose which probably was something that when I installed them I said I'll come back to this and I just never did so just all tighten [Music] these [Music] okay and then let's try let try putting in hammerhead nuts instead of rins H I need to be present to win don't uh you do not have to be present to win nope nope hey BB's happy Wednesday happy last Wednesday of the [Music] month [Music] okay so yeah we'll put a little I need a third a third hand right about now let's see there we go okay see if we can get this in I could see I could also see if there's maybe there's some right angle USB connections that are even thinner they don't stick out as far as this if I need to but I don't know that that's necessary I just think again I need to scoot this board okay probably need to go in this direction like this there we go there we go y I don't know we we might be screwed um well now that I'm thinking about it too how are we going to access the micro SD the micro SD card slot right the micro SD card slot you guys can't really see that cuz it's blocking it but it's down below here um let's think for a minute can it fit [Music] there let's see yeah yeah it needs it needs something that's for sure yeah so that's just shy however if I modify this part that could work um what are our other options so I technically can I can access the micro SD card slot through the um through here so the bigger issue the bigger issues the screen I wonder can we use a single expansion cable with this screen I don't know cuz it's it's got the adapter that gives it its MCU so you can hook it up over USB but I wonder if we need that let's see what's chat saying feel like you should just get a switch fir frame nice need a skirt mod where's the link for the drawing it's not up yet uh no room on the PSU side I don't think so yeah so the it's just the USB uh the USB connection is is so close to the [Music] skirt if we had if we didn't have a right angle one I wonder if I could just feed it through the back you know what I mean just go straight into here have the cable go out and then go in through here we could probably do that I don't know it's not a very pretty solution but that would work mod the skirt aren't there uh aren't there SD extension cables [Music] yeah yeah it is it is a little Jank to have it go on the [Music] outside H I feel like Steve gave me some USB to ribbon cables at one point I wonder if that might work although I think those were HDMI okay so I think that solution for right now is leave board in place and just don't do don't use the screen for right this second until I have some time to chew on it and think about what I want to do uh print maybe print thinner mounting brackets that could that could also work that could definitely work I could probably get this model and just basically cut this in half which would give us we don't need a lot right like we we really don't need a lot so maybe that's that's what I'll end up doing is just redoing the bracket in a way that makes it where it's thinner um yeah let's just let's tighten it up for now I'll just make sure I give everything at least a little bit more slack and for right this second I'm not going to plug in that USB cable because it is it is problem it is a problem it's going to be sucky to tighten this I mean even even this area so another solution just thinking for a second here another solution might be to not use uh not use a side mounted board Mount and see if we just mount it in the front like with VHB like like what what on the if I'm not mistaken that's what's on the the vzer I've done that with a few builds actually just vhp mounted I and it's been fine come [Music] on there we go yeah so let's see if we got rid of if we got rid of this Mount alt together still pretty tight that that could work that could work if I get it somewhere right around here or even mount it here with a different angled bracket I'm going to have to play around with this and figure out what I think's best cuz I'm even thinking that if I change this so if I shorten if I shorten this arm so where it doesn't extend all the way out there and maybe it's right here instead I can potentially Mount this in between the mounting points for the PSU which would put it somewhere right about here roughly maybe not quite that high but somewhere right around here and now I've got plenty of space for USB cable I can access micro SD that that might be what I end up doing just putting it somewhere right around here almost tempted for right this second to just vhp it right here I think that's what we'll end up doing uh with the board for the side the PSU yes uh you could design one that sits under the board uses yeah that's what that's what I think I'm going to do PF I think vhp might be the way so let's get this installed over here for right now I'm not going to sorten any cables because I'm going to be moving things around let's see if I can at least get these guys to tighten [Music] up I think that's probably the best route to go though again this is not an issue you'll have if you're using like an SKR board or um or the stockboard this is just an issue because this is a this is quite a bit bigger footprint wise than what is intended to be used uh giveaway is not open yet giveaway opens in 14 minutes roughly yeah vhp will work great mod the PSU Mount to integrate the board Mount we could do that as well I guess if I just get the distance from this to this and then take the bracket pieces there yeah we'll figure out something I'm not sure yet what I'm going to do but I think this is likely we have a bunch of space down here uh the only the only downside I can think of is that this fan again it won't be getting the cooling but I don't think it'll be an issue I just like that there's more space here it feels like we should be using this space for something all right let's plug some things in so let me go ahead and feed feed these wires down uh hope everything's good hey Stuart yeah everything is going good I just we're looking at the board because I mean again or or I can see if we don't even want to use USB but I think I'd like to have access to the USB port so at the very least I need to have a USB extension of sorts this not might need to remove the power supply to get the um yeah I can't feed the can't feed the stepper Cable in with the power supply the way it is right now here we go here we go we are through through on that side wonder if I want to rout this like that okay uh I don't really know but is the PSU get hot how is that spot cooling wise there's a fair bit of airflow regardless because one second let me move this out of the way there's a fair bit of airflow just from the skirts having openings on all the front why are we not here we go [Music] yeah I don't I don't foree I don't pursue the heat from the PSU causing causing issues if I need to what I could probably do is mod the skirt um can you guys see this yeah so I could probably mod I don't think that did what I wanted to did it did not one [Music] second dude [Music] why one of those cases where the te nut's not spinning but what what I was saying is is that I think that if I needed to I could add a fan right here if the board's going to be right there if I need to I could you can add a fan there so either either either mod this skirt or just sort of have a thing that snaps on or vhp's on there but I don't know that I don't know that's going to be necessary there we [Music] go okay [Music] 8 carries USB breakout boards you can extend they like they a USB to basically uh oh wait USB breakout board interesting yeah I know I might have Steve sent me either some USB to ribbon cable boards that are really small or maybe they're HDMI to ribbon I can't remember but I I've got we we'll figure it out it's going to work it's going to work out you decide not to get an X looks like they launched a motor vibrating thing like the bamboo did yeah I canceled I canceled [Music] mine I think it's a cool printer I'd like to play around with one but it it's just it's a lot of it's a lot of money if you don't have a very specific need for it and as far as like with the tool Changers and stuff coming out for Vons it's a lot cheaper to it's a lot cheaper to convert one than go with that if you've already got at least [Music] a um [Music] aoron okay so that's one cable in and this is E3 easy Steve and when I go so the location it was going to be mounted is right here and the issue we're running into is this is that this is where the USB port is and even with the right angle it's still too tight so the current plan is to model up something that just uses vhp and mount it here but I'm almost wondering um PF had mentioned can I just make this bracket thinner which I definitely can and that could be enough but if we do go the VHB route and we remove this bracket Al together which lets us get this basically all the way up to this Extrusion that that gain of I don't know what that is is it no it's not 10 m I don't know s 7ish millimeters or so um might make it where we can actually leave this here and still have access to the micro SD card slot right now we're just sort of staging it and plugging everything in and then I have to figure out what the long-term solution is but yeah left side is X sweet I did it right that's that's what I went with yeah it's it's tight down there it is tight down there all right so let's feed the Z Motor [Music] cable down here uh you need a right angle cable yes um it came luckily uh the only cable right now or the only thing that needs to be plugged in is their screen on this and it did come with a right angle cable so the only other thing I I mean I could see myself potentially plugging in a um I don't know a camera or or uh what else would I want to plug in right now that seems to be the main thing but at that point I think I could just do again like a right angle either a right angle adapter or just get a right angle us USB if the USB cable isn't attached on the other end to whatever I'm plugging into it like permanently attached to it so and then the thing I don't know as well since we used our own we used our own y motor and let's see I don't know if they gave us a cable for y I think we need to use our own y cable so let's see this is a short motor cable this might be long enough though this definitely won't be long enough if we end up relocating but this might be long enough for a current location let's see let's shove this uh in here ERC but ercf if we're doing that on here which that's the game plan it's the game plan is to go can with it because I got the big tree Tech ercf can board um so that's likely we'd likely just go can okay so I have USB cable let's make sure that that is indeed going to be long enough for a current spot of course it's right behind the freaking board again dang it [Music] um [Music] fishing for the wire hey Ted agree something really cool about ercf switch wire yeah I think that it's going to be a great printer for it yeah grabbing cables out I'm trying to not have to remove the board again but we might have to [Music] so [Music] close I got it okay that was fun okay pulling cable through pulling cable through there is like just enough just enough slack on this so we got X and we've got y I might actually end up extending this in the future like probably like a little bit more slack maybe maybe we'll see that's actually close to close to perfect the XY and then Z so Z which we just fed through is this okayy nope this guy okay there's the going in there we need to plug this driver back in here so let's do that okay so the last one we've got is we'll do EZ uh yeah ezero motor and that's going to be should be one of these that's our fan uh this says yes this is it 1 a 2 a this is our two pairs and is going right here like that okay now we need to pull up cuz I don't know I don't know the pin out for this board let's pull up a diagram really quickly here three or E3 B Tech E3 easy GitHub oh it's giveway opening time one sec let's do [Music] that okay give away is officially you could have a curved a curved USB what's [Music] that okay giveaway is pinned in chat for anyone that asks we're going to be giving away a spoil of polymaker filament anywhere in the world and that will be drawn in about 30 minutes you don't have to be present but if you if you win and we congratulate you you won't be here we'll be sad so all right let's check this [Music] out oh what Hardware actually no we just want you not just have a pin out user manual interface list I guess this works as well all right so let's plug let's plug in our limit switch wire for y as well oh this is cool this is what we're going to be using okay I'm going to unplug I'm going to unug plug what we just plugged in yeah that's exactly what I'ma let me show you guys this so someone someone had said early on that we need to reuse like all of the limit switches on the Ender I think at least X and Y and I only had a so I actually ordered one second I actually ordered the set of Ender limit switches which we end up needing but this is perfect this is this is what we need it has more more dist and it gives us our connection for the Y motor as well as the Y limit switch that's perfect wireless USB you showed me where I can order this wireless USB zombie okay so yeah I'm going to unplug y that we just unplugged in that we just plugged in here uhoh okay deila think she needs water hey go get some water girl hey honey you make sure the dogs have water Delila is seeming like she needs water thank you just sort of like not dry heaving but uh wouldn't a front panel skirt a front front panel skirt makes sense what I don't what do you mean a front panel skirt hey Derek I forgot to hit the like button until I haven't even said once what do we had I haven't even looked I forgot to mention hit the like button uh we got 64 likes and 149 people here let's get we can do 100 likes I believe let's get to 100 likes easy easy for the E3 easy board uh it seem thanks for be c a member's sound thank you very much all right back at it so we are feeding these two wires through here I think that the biggest mistake so far that I've made is not feeding all these wires should have been fed already before I mounted the board in here all wires having all wires in here will make things a lot easier I wish that is something I wish I had done once you got power supply mounted and stuff it's it's just a lot more difficult part of it too is again that I'm using this bigger board which isn't isn't simplifying isn't simplifying anything right now but had I ran these before I wouldn't be sort of fishing around boards and such okay so there is our hey Steve thank you very much for the five gifted memberships thank you thank [Music] you okay now we've got y motor and Y limit switch plugged in so let's do looks like the Magneto x videos are about to flood the internet super interesting printer do you mean because they're starting to ship or is there something I've missed okay why is plugged in so why limit switch [Music] shows where are limit switches is there something I'm missing PS on can fan zero there Z stop is right there be touch okay X stop is there where's y stop y stop okay so y stop looks like that's what it's calling out so right next to the mounting hole in the center the right side no that's not right why does this board look different um mine has oh don't tell me I have a different board that looks right that looks right and then things look different on my [Music] board I can't so okay I can read it off the board my board looks slightly different so I'm hoping it says it's 1.0 and mine says 1.0 so I don't I don't know let's go with that that's why what else do we have we've got X end stop is going right here accent stops right here their Mister is it looks like down [Music] here ther bed ther zero so Center is Center is our hot and therm I mean we can Define these how we want I suppose but uh just double check the silk screening on the board yeah that's what I'm that's what I'm doing now do you have a different revision it's possible so another thing that's kind of throwing me off is if you look at this photo so this looks like this red box looks like it's surrounding two pins right but it looks like there's a third pin there and on mine so this shows you've got like your expansion you got three two pin connectors which matches mine then a four pin which matches mine but then here this looks like these are the same um like this looks like a two pin and a two pin on mine I've got a two and a three on the right and then right here I've also got a two and a three on the right so I can't tell if it's just the way this illustration is done or if there's actually some difference um yeah I think it might just be the illustration that's kind of weird this is my first time watching on desktop and now I finally see the banana I used to be so confused I finally see the banana wait what the e3z has three pin end stops on the PCB oh okay gotcha oh yeah yeah yeah okay that's it's interesting though because on the right side like let me show this so you can see this right it looks like this looks like there's two pins and then you've got the the opening on the board two pins and opening on the board same for these ones but in reality at least on my board which this could have been something that changed uh because this was probably an early I'm sure this was an early board for review we've got a two pin uh with a hole on the board a two pin with a hole on the board but the ones above them that are also supposed to be according to this illustration twos uh like a two pin jst with an opening are actually both threes so that's that's what sort of uh is playing with my head a little bit it's it seems like the board itself is the same but maybe there's slightly different connectors um on the retail version versus the version that I've got hey big red oh the banana from zombie yeah you've never se you never seen the banana okay so fans we've got fan zero fan one fan two which are these three so we'll do fan zero as um part cool no no hot and fan part two two is so the one I just plugged in right here is for the fan in the back um then we've got this is a thermister for the bed which goes right here on the right of our current [Music] thermister so this wants 24 volts and this wants this says F5 but don't know what F5 is Hoten fan Hoten fan so they're sharing oh I think what's happening is they're all sharing 24 volts in common so where do they intend for you to Route let me let me see [Music] this okay tool head board yeah so they're all getting 24 volts and ground from here which I think is just basically a spare hotend Port so we should be able to hot bed I think we can just use H1 on here uh cuz this has this has the ability to power two hotends I think we can just use H1 here in place of that logging out will'll have to catch up later hey thank thanks for hanging out TJ that would throw me off too yeah currently shopping boards uh currently shopping boards match what you have the picture is wrong oh interesting gotcha hey Doo so you're saying that the picture is just wrong that illustration okay so yeah we we're going to take 24 volts for our tool head board from the spare hot end the spare hot end port which is going to be h e one so positive these are all sharing do that since we're not using the Clipper expander okay probe probe LED and 5 volts yeah we're going to have to redo some of this because the fact we're not using the stock setup so we we got partk cooling fan these need to become these need to become jsts they don't need 24 volts because we're again if they're they're sharing a common 24 volts h0 so I think H e0 okay Park cooling fan hot end fan h0 so h0 can go here so wait actually I don't know it looks like they're even [Music] sharing according to this it looks like this is even what's powering the hot end so we're not using 24 volts for our hot end either we just need our signal so I'm going to mimic that so 24 volts in ground will come from the same connector and then our hot end zero which I've got right here h0 is going into negative oh with things like this I always think how hard is it to update or another photo to the mar yeah I know I feel like the for some reason feel like the E3 EZ board just didn't catch on very well and I don't really know why maybe May because it's too specific and there's like the man m4p or m8p instead I don't I don't really know the answer to that okay so here's ground yep all right so this is our ground this is going to look awful right now again I'm going to be moving everything and shortening everything right now I just want to get I just want to get everything plugged in okay that's good I don't like this our hot bed our heated [Music] bed has tinned wires cuz this is a cality thing uh let's let's cut the ends off of this and let's just strip some wire where uh look at the handsome guy thank thank you Nexus goodness see you hello everyone how's it going happy Wednesday trying to get this this guy powered on so sort of in crunch mode let's throw some let's throw some uh Barrel connectors on this as well I think we'll go with the same the same blue ones that we used previously there we go and we dropped it uh I think because it seems so focused for 3 it ignored other uh it's ignored forther PR yeah which is which is funny like the only thing really well there's probably a few other things but the main thing it has that even makes it you know E3 is the mounting pattern but that's such a small thing you know you don't even have to use that other than to create a mount for it but you're probably right I think that people see it like oh I don't have an Ender 3 so they it kind of like the board niched down a little bit too hard by calling it a you know the E3 easy [Music] okay so I do know uh DC in one second here let me check one more thing oh I goofed I I will definitely I think I think I goofed on this so that says M Power which I thought was main power I'm nearly positive that that's for motor power dcn is where those need to get moved to so I'm glad that I saw that I didn't realize that this had separate I didn't realize it had separate voltage for those Motors so let's unless I'm mistaken but I don't see let's see how it could be uh boards with integrated SBC are definitely a must for the v0 makes Electronics very yeah they're way cleaner see if I go to the instruction manual for this uh also giveaway form is open anyone that just showed up it's pinned in chat we're going to be giving away a fullo of poly maker filament in just a moment here each motor module each motor driver module can select the corresponding motor voltage by jumper or [Music] caps M Power yeah so you can run up to 48 volts these motors the drivers because these are the E3 easy or I'm sorry because these are the easy drivers you can go with higher power drivers so so that's what it is in so I'm glad I'm glad we caught on to that although I don't think anything bad would have happened we just wouldn't we wouldn't have had power to the board which would have been a very antil climatic moment okay so let's remove you and and you yeah I should have checked that I guess a lot of the boards have that now but for some reason I didn't think this board did so let's go like that okay this is our bed we've got positive that side that's fine we'll just tighten that up I'll show you guys kind of what I'm I think that the screen share probably showed uh cleaner than I can show you with this sort of Rat's Nest a wire but I'll still show you over here what I did okay so you think because it's print Ender doesn't have fancy stuff well again I guess it's one of those things where it's like I wouldn't think that a board called the E3 easz supported 48 volt drivers I guess you know that's on me uh so yeah I originally thought that the terminal block at the very end was our DC in it's not dcn is second or third and fourth from the left and then so I moved those over and then this is our uh DC 24 volt bed that I plugged in so over wire should be good we got bed we got DC in we've got nothing on the 24volt line for a hot end because of the way this is wired up then we've got uh um signal for a hot end then we've got um did I do that wrong yeah no that's right and then we got 24 volts for our tool head board and ground for our tool head board and all of the things connected all the things connected are sharing a common uh sharing that in common so now we've got a hot end fan that needs to get plugged in we've got a partk cooling fan that needs to get plugged in those both need their own uh jsts and then we've got these guys which are probe LED and 5 volts we need somewhere we can pull five volts from um so we're just we're going to have to crimp a couple of wires um or the crimp a couple of wires basically is what we're what we're doing here so we're getting close though unplugging things in which is sweet where we go so yeah fans are here let's go to our is there a no P out's going to be in here I guess I got to fly Gemini V3 my b 2 and definitely recommended yeah I'm running a fly Gemini V3 as well on on uh the cybor v0.2 that I built and I've got no complaints I got canbus set up on it too I haven't installed the tool head board yet like it's it's there dangling but it's not on the actual tool head but it's it's been a pretty solid board I don't have to complain spyfy has been solid and performance it's been great okay here we go so fans so we need to wire in fan zero and fan one so let me grab did this kit come with I think it came maybe it didn't let's match they're using white we will use white connectors Bam Bam and we need these nope that's not right we need [Music] these okay I think I'll end up uh between now and well we're not going to be streaming on this printer again for 4 weeks because there's quite a few things do in between now and then but between now and the four weeks and now stream I will have this mounted with VHB on its own different Mount either probably here in its exact same spot uh and I think I'll spend some time cleaning up at least some of the wires I think I'll still keep some slack because long term I don't exactly know how everything's going to fit in here but uh this is like these these motor wires for x and z or I don't know in a corx y or corx Z usually it's AB Motors I don't know if with corx Z it's still considered AB probably is um the they're just too long they're too damn long uh I need a crimper for these I think I use these IIs I haven't crimped in a while actually uh can you show your config once it's going I just okay um yeah sure I can I can definitely do that are you using an E3 easy board or you just want to see like the overall like what I set uh here we go we did it okay that one's done where's the other fan see the par cooling fans really quick or the yeah the fans really quick here and then we'll move on to the last few things and then we will flash card and flash card flip switch and hold breath where could I find a wiring diagram for the power switch and socket uh inside here that was in this that was in cybor that was in cybor instructions um I think I saw it here yeah here we go so yeah red red live black neutral and uh yellow Earth but yeah this is their this is their wiring diagram they just update or they updated their their guide it looks like 3 days ago so I don't know you know what they all changed um but I would download the latest version also copy wait your power input wires might be reversed on the SKR board what what what do you [Music] mean it shows positive on the left so oh okay so I think maybe what you're saying is that they switch things up like for hot end zero um so yeah if you look at this yeah if you look at this you've got your your voltage on this side then ground then you've got signal voltage signal voltage and it switches again voltage ground so voltage should be on the left for that which it is so it looks correct um you got me questions Shing things is now it looks correct but definitely check that because it's kind of funky that they don't keep that same kind of pattern here where can I oh of the switch itself I don't I don't know usually they're somewhat generic but I know that when Steve and me were doing the vzy bot um we had to look we had to look cuz it was kind of funky the way it was I don't I don't actually know for the switch itself why why did something happen with the switch did the cables come off oh come on it's really slippery wires there we go uh looks different than other SKR boards oh uh let's see and connected via u2c you can't also do canas and you don't have others on additional USB also my p2w always running hot when switch okay [Music] okay oh no I don't know if I got that the wire kind of popped out no looks looks good all right so let's plug these two in um me look at the diagram Oops why are we oh tripod's caught okay so our fan connections are going right on top of this guy here here so the one I've currently got Which is closest to there is fan zero which is actually not where I wanted you I wanted this to go I want you and fan two so we got fan zero fan one fan and the it looks like the bottom pin is the is the uh signal so heart cooling fan I'm going to want as as fan one so let's see it goes like this okay so this will go right here underneath it and that popped right [Music] out it did not it did not go in second here okay try that [Music] again okay that is in and now the final fan which where did you go is right here we want that to go in uh fan zero which is the one closest to our screw terminals right here bam okay those are in so our fans are done all we've got left is Led probe and five bolts so [Music] um where do we want to grab five volts from in probe is there a dedicated probe Port B fan motherboard fan oh there's a we could so there is an extra fan Port that's cool so we can potentially move mfan if we want if we need another one there can fan fan fan power power power y stop [Music] E1 uh the Mr the Mis okay RGB so RGB is going to be next to our zstop so let's wire we'll take 5vt and pc7 for our RGB okay so let's yeah let's cut the last guy what time is it it's oh it's time uh yep if you if you have not you've got 2 minutes and then we're going to be doing our polymaker filament giveaway drawing here two minutes hey ballistic what printer is going to be the next build so um that's a great question uh the printer I think we're building is secret until it's announced um and that will probably be late April early May the game plan is right now next week we're unboxing the two trees sk1 so it won't be a printer Bill it'll be just a hang out check it out print see how it does uh look under the hood the following week we're doing a self- press build so we're building uh this Ste press they printed all the parts for that week after that we're unboxing the T300 so it'll be similar to next week's stream but a different printer then we're doing one more series on this guy uh which we'll put the panels on I'll show you the wiring I've cleaned up and where I've mounted the board as it's final location then we're then we're building Milo uh depending on if Milo is delayed or not delayed there might be something else happening around there and then after Milo will be the next printer build which I anticipate will be late April early May probably but things changed that's the current that's the current lineup but the next four weeks one two three yeah the next four weeks are set those are the only ones I definitely confirm take a look at the Ft EMS ft EMS swc V2 mod looks great for wire management mounting boards and psus can you send me that somewhere there is no way I will remember that post Milo will be June March April you could be right depending on how long the streams end up being hey GLA hey Papa Goose how many likes do we end up getting uh you I can't say what printer the build no I can't yet until until there's until I can't yet that's all I'm going to say when I can say what we're going to be building if it materializes the way I'm hoping it will then I will I will share um again we're we're closing the giveaway in 60 seconds so if you haven't filled it out it's pinned in chat and then I'm removing [Music] it oh we did hit 100 likes thank you we're at 110 let's see if we can get to 150 that's our new goal let's do okay we a new sound effect I wonder what's for dinner perfect hey David hey Jim uh got here um got here just time this evening I'm planning an end wire project to see watch most catch up we probably rewatch too nice so quick while you're filling out the giveaway form cuz I'm giving everyone a tiny bit more time today the the issue We've ran into is self-inflicted definitely because I'm using this board this is an E3 EZ so it has you can take a CB1 or in our case a cm4 uh you don't have a separate uh Raspberry Pi board because it's this is the Raspberry Pi board and we don't use the buck converter it's it's a bulkier board having a bulkier board in a fairly tight compartmented machine is is proving a little bit complicated um I can't actually fit even a right angle USB into the USB ports for the screen so we're playing around with that um but yeah that's really the only I think that's the only complication we' run into today and and that won't be the issue if you're using either the stockboard with the Clipper extender as as they intend or you're using something like an SKR Pico or an SKR uh E3 SKR mini E3 yeah okay let's do the giveaway drawing so if you haven't entered in I'm removing it right now and that's it we are removing unpinning it's been up for 37 minutes or [Music] so David I don't know if you remember what I was talking about any cubic Viper switch fire I completely scrapped that idea end up getting a P with hey a PS with an AMS is a hell of a lot easier to get up and running man thank you Lex um I wasn't being a whole about June it's March tomorrow and your builds are stream time limited compared to stepheno yeah no you're you're probably right Phil um because I I don't think as far as I'm aware the Milo isn't going to be shipping till end of March beginning of April anyway um and so if we start in April uh you know April to May you're you're you're probably right you're I'm being overly optimistic and you're being realistic so you're you're you're not wrong hey hey Dutch I'll be building a Milo as well later this spring looking forward to it and using it for cool projects oh that's awesome yeah me too I'm just looking forward to having like different machines I've got a two cnc's in the garage but having a mill will be fun and again the fact that it's got a lot of printed parts and there's modability and upgradeability I feel like it's just going to be fun to see what we can do with it and I'm excited to learn uh excited to learn more so okay enough of me enough of me uh delaying this let me drop we got 128 128 people in this [Music] giveaway okay that looks fine also we were talking from n 3dp currently looking for a good storage solution for filament anyone with an enclosure solution for a dust environment thank you very much for the donation um currently I'm looking for a store a good storage solution for filament anyone with an enclosure solution for a Dusty environment uh I don't know you must you probably saw what napin showed me or what I'm building right which is the three Ikea Billy bookcases with the I'm going to be printing out or getting conduit cutting conduit down down uh covering the conduit so it looks a little bit nicer and I'm not enclosing it but they do actually make glass doors for the entire bookcase the glass doors were somewhat pricey compared to the actual bookcase being fairly inexpensive but that's something that might be worth looking into the only other things I know of are like rep boxes which are which are fine and look nice but it's that's a very small amount of filament um compared just thing like a full bookcase okay uh let's do this I think what I was saying was we were talking about me building a fence and I I ended up ordering all of the vinyl for the 4ot fence and then I was going to rent an augur uh which is just a whole whole digging machine um but the price of renting it for one day was $111 I ended up finding a 12in diameter gas powered one for $50 more so I bought an augur I have no idea how it's going to go I figured I'd use it uh for this project and if I don't end up needing it again I'll sell it locally for like half the price which is still cheaper than renting um and I don't have to rush myself like if I've never worked with concrete before either so if concrete's taking longer to set or whatever I can drag it out for multiple days versus renting it for 24 hours and having to get the whole project done in that window so for anyone that was wondering cuz we did talk about that the other day all right we got 128 entries fence pole digging business yeah there you go if if nothing else works out I've got an augur and I I I've got the experience of a person that's Dug Dug up one fence I had two friends that have looked to rent an augur for putting in a fence both end up buying that's funny yeah I was just I was looking at it and the one that hum Depo has I think it has I think get was 6 to 8 in diameter holes but I'm doing 5 in x 5 in uh vinyl fencing and according to the manufacturer you need a 12in Hole uh so that way you can do I think it was 160 lbs of concrete per post so I was like well I have to order the bigger one from Home Depot then like yeah anyways I'll let you guys know how it goes if if if one day uh you know we're streaming and and I can't move my arms it's cuz the augur won the fight uh I'm hoping it won't be terrible with our soil but who who knows anyways let's get into the drawing uh thank you to polymaker for allowing us to give away a spool every single week I am hoping um I reached out to polymaker I'm hoping to use uh some of their filament for the Milo but I actually need I have a ton of polymaker filament but of course not enough for what is needed for Milo in the same color so hopefully I will uh be able to print out uh in their filament and show you guys you know again some cool colors um I'm thinking maybe Galaxy for one like the accent color and then just a I don't know I actually I think I was doing Galaxy for the primary in black and then a colored non glittery one but uh if you have not entered into one of our giveaways it's anywhere in the world the winner will get an email from me within 24 hours and that will have a form where you'll just put in your information about who you are where you won and polymaker will then send you a gift card where you can either purchase a spool of filament or if you want like one of the premium glaster carbon or some specialty filament you can use the gift card as sort of like a discount off of the total cost and then you know pay the difference so it's a pretty cool pretty cool program all righty so it is is February 28th it is the last stream of the month how many times are we shuffling today what's our let's let's do from it's 29 days why don't we do 29 shuffles it's a leap year we're doing that 29 shuffles is what we're going for 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 six seven eight and nine all right yeah zombie zombie got it something me and zombie can agree on all right here we go three two and one good luck [Music] everybody Tony Tony ham you are our winner congratulations let's do what of sounds do we have that are appropriate for this we'll do hadan congratulations you are our winner so I will send you an email again probably tonight aon's working so I'm on Jack Duty once Jack goes down to nap I I'll get some stuff done so I'll send you an email tonight and you uh will fill out the form and then polymaker will get you your gift card so congratulations and thank you everybody for entering uh entering in progress any any progress on uh any progress on what zombie all right let's get our our last three wires installed and then we can Flash this we're we're looking in good shape to at least be able to power and move things today I want to print something but I guess worst case scenario the the recap stream will be our or final print and chill stream okay yeah let's just put let's just crimp all of these oh the wiring getting there yes we are making good progress I don't know where I'm going to plug probe into though I think it I think probe probably just needs its own signal pin so I'm wondering if we can just take it from the BL touch um from the be Touch Port sorry I didn't finish didn't finish my thought uh yeah inductive probe at least for now I I think we'll probably end up using the Eddie sensor um if it ever comes out I don't really know at this point what the deal is I I think I mentioned last week that I'd reached out to the main contact I usually talk with at Big Tree Tech and uh was basically given the update of no update for now so uh please hor powering need Earth Earth the frame I don't know if I don't I don't know that I earthed my I don't even know if we've earthed my switch wire the the one that we've been using for a couple years [Music] um yeah I don't know what is this F5 I just found an extra [Music] um I don't know what F5 is uh Hey man of the COC not a whole lot I mean we're we're making pretty good progress here we have like four we just found a mystery wire so I thought we had three wires left we got four wires left so we're going to quickly plug in we're going to quickly plug in our 5 [Music] volts I just got oh it's a fil filament sensor so that's just an extra that's not used there's no filament sensor on this I also I just got notice or notification I don't know I don't know what that was let me see maybe it was did you did you guys hear that it was like it sounded like a member maybe let me log in really quick to the stream element stuff yeah so it's just an extra wire that I might not even plug that in for now uh I don't think I'll well there probably will be a filament sensor at some point but that will be later on yeah Kevin I don't know why I didn't see it pop up on screen I don't certainly don't see here but Kevin thank you for becoming a member it says Kevin marman uh let's do sure I thought I heard something I know I'm I'm a little a little off of sometimes okay standard desktop nope that's not right that's not a camera okay here is what I'm looking for so RGB is right next to this and we've got bable on top then um or signal so we need okay let's grab a connector 5 volts is on top and this is going in this way so you are five volts like that and you are LED going right here okay this is a Rat's Nest okay so filament sensor again I'm not I'm not going to plug that in for right now but we certainly need our probe um BL touch has a connection here I would think we can just steal pa6 I would think we can just use pa6 from it that's the only I don't see another dedicated probe Port they didn't have a stepper driver so I had to hey rahee how's it going I used my f asked for a chamber thermister on top of the oh that's nice yeah that's a good use of it if you're using the Omni probe you'll need a 24 volt and diode oh 24 Vol diode yeah 24 volts it's already got because it's sharing everything plugged into that board is sharing um is sharing a common 24 volts but yeah I think we can just take pa6 from BL touch [Music] um I can't tell if it's the same size the slot looks slightly [Music] smaller no it's not okay yeah let's just do that uh see we're not using you so we just need you uh touch yeah we'll take pa6 some boards have a pro port with the diode built in yeah I I I don't see that on here um motherboard fan SPI we've got all of our all our steppers um oh there's two motherboard fans interesting uh power power detection which I think is for the the um I think power detection let's you use their um oh gosh not SSR it's a uh the moset to turn off the power supply I'm pretty sure canbas fan I mean I think that's all we've got is the BL Touch Port so we'll try pa6 and see if that works for what we need if not we can change change it um and nice is saying before before I power it on to ground the ground the frame which I imagine we aren't grounded now because the power supply itself is isolated and grab my multimeter really quick um how would I even much of the frame isn't actually exposed yeah so we're not grounded so where is the best place to ground this I can probably I'll probably just ground it right here we've got oops zombie means on the tool head board wait some boards have a prob Port oh gotcha what did cybor stay in the docks for it we'll check real quick yeah for here probe is just going into this connector wait yeah it's going into this connector [Music] so maybe we've already got it in the tool head board I think we do already have to uh yeah I'm not sure how it works if you can feed 24 into a 5vt signal pin [Music] looks like they're hooking up their five bolts right next to it we'll give it a go yes it's on the toilet board okay yeah we'll see how it goes then ground it to the PSU Mount screw into the rail but this is this is coded um this is coated the uh you know it's PW coated so it wouldn't unless I scratched unless I scratched off some of the coating it wouldn't actually touch the metal I think we just use this this bolt right here should be fine um I'll just grab a let me see what we have do we have any ring connectors here that's for LEDs yeah I'll just take one of these there's extra extra wire so I'll basically just plug this into ground and see if it'll fit where this bolt is right here use the M3 holder already drilled near the slot that's in cutout oh you're seeing this guy right here it's not threaded though is it if that's threaded that will be easier than having to remove the Big Bolt such a Rat's Nest yeah let me let me grab a let me grab a screw M3 probably m310 should be plenty for this that's what I use oh cool so see I can at least show this a little bit we're going to try to use there's a little hole right here that sounds like it's pre-threaded for M3 let's see if that's the case might be too big of a damn screw let's yeah that does appear to work um I don't know I have like round H cuz these are just Spade connectors and I got round one somewhere I just don't know where so we'll use at least for now I'm just going to use um use this where did I put okay where did I where did I put the black cable guys the one that I was just [Music] holding here this is what we're using what label maker are you using uh none of these are me these are all these are from cybor um you know what let's get a let's get a washer as well these are from cybor uh my label maker I haven't done sorry I'm trying to think one more I haven't done uh heat inserts with it I bought the cartridges it threw an error and then someone told me was uh canny told me there's a way to get it to work use a washer yeah yep yep it's like we need a little ideally I wouldn't be using a uh is It sped or for I'm using I don't I don't know but yeah ideally I'd be using a round one that can lock around this screw but let me actually let me check if I've got one I think I would have put them in here so i' rather just do it right if we've got it yeah looks right sweet taada we going to use one of these instead that way that way there's no risk of it accidentally slipping out uh the next question though is where the heck are my where is my crimp for them this is it got it okay so we are cutting don't know where my Cutters are we're cutting the head off of this guy getting our strippers and we are pulling that much okay that is not that is too too too big there we go that's about right and uh have the wire go towards the center so it doesn't get knocked and you can get the cable cover uh this goes in here like so and we are ah closing that down and we're good um I should probably shorten this at some point but for right now we won't do that and um I think I I don't know how that cable cover is going to sit actually damn it getting the strippers I need to stick around this is this is modbot after hours things get dicey okay so if I have this like this I don't know whether it'll be problem atic for me um I don't know if it'll be problematic for me getting the little plastic cover and we we'll just do this for now let's screw this in like this I'll cross that bridge later all right let's loosen this guy nope screwdriver we are so close to powering this on although we need to flash our image our uh need a flash main C OS okay come on guy there we go ideally I would use wos for this and not shove two of these under one screw terminal so I'm might end up uh I might end up printing out a small little wo holder so I can pop these in right here or something I I don't really love doing this but right now this is what we're rolling with okay so now if I did this correctly okay I should have ground here and I should be able to touch on the frame let's see yeah uh all the way top yeah yeah we're grounded the prison flash it's a wild day it's a last it's a leap year I don't know what to say guys guys and gals okay so the next fun thing will'll be figuring out where I've got a Micro SD card that we can that we can get this set up with so let's go desktop let's go to the instructions actually okay o there's a emmc version I don't think I've got that on my 4 uh download OS image wait I'm confused do I not can I not just flash main sale OS like I normally would I I was under the impression I could just go here go to choose OS specific purpose OS 3D printing and go to Mains is that not orange pie orange pie res 3 Pi is that not the case Has anyone used I actually this is my first time using a cm4 so it's not a cm4 light when using cm4 download image of PL directly okay also you can download a pure image so I should be fine with that then and I imagine it's going to be 64 bit yeah we should be good with that let me grab now man I don't know I don't know where I've got a Micro SD card that's going to be big enough um you know what wasn't wasn't this machine already in use did I not have no micro SD card there no micro SD card there so clearly not uh what is this okay so we've got 128 megabyte one uh isn't 32 bits still advised is it steal it from the bamboo printer I think I've already done that the strange thing is I know I oh oh oh oh this is where one of them is yes I knew I was just using one the other day I missed a couple streams and now we have have a full we're getting there 128 megab or gigabyte I don't think yeah I I meant for just flashing the MCU that definitely won't work for the Full O I found an 8 gigabyte one everyone is going to use 32 okay we'll do 32 I don't remember actually choosing that normally so that's kind of odd to me in itself itself I don't remember having to go through this normally maybe I have okay let's plug in where is our reader hey Daniel yeah we've definitely made some really good progress I between now and the stream we're doing in four weeks from now where we're going to be putting the uh where we're going to be putting the panels on I'll be doing some cleanup and a few little things here and there what the heck here we go plug you plug you in like this okay I'm going to really quickly I don't think it's going to show I don't remember if it's going to show my wi-fi credentials let me see if I go here enable SSH full set username and password all right we go username modbot and and password there what just [Music] happened oops crap okay configure wireless land yes that looks correct no yes Wireless country okay hopefully hopefully this works I've definitely flashed a few cards and it airs out on me uh yep Okie do please insert a drive yeah thing all right hopefully we're getting close always 64 bit wait why did someone say I don't know Linux but Windows you only need 64 but if you have more than 4 gigs of RAM gotcha yeah I think I've done 64 in the past I honestly don't remember I haven't I haven't flashed um I don't think male OS using this in quite a while because the last build we did was the Trident and the Trident was using the orange pie that came pre- flashed right so I didn't have to do anything with that and what we built before the Trident we built the VZ bot and I don't remember I don't remember that one how we did that one that was using Raspberry Pi so I think we probably would have done it like that but I was since I was streaming with Steve I probably just follow what Steve did in that instance and then um yeah we've used a few different image types I just can't remember for limit is due to working with P files though so 32 doesn't matter main sale OS is 64 bit [Music] now what are the specs on this so this is a RPI cm4 light R1 D3 Raspberry Pi compute module 4 so I don't know let me quickly see if I go under my like order history if I can figure out what I bought when I bought them uh receipt for your no raspberry High order okay pie shop so what did I buy from pie shop I bought a pi20 w so that wasn't it then I bought a compute module 4 wireless 2 GB light so that must be that's what I bought two of them so yeah it's 2 gbes RAM I think we'll be okay I think we'll be it'll be fine we're arguing over both means yeah we'll be fine the C4 is 64 bits whatever you're doing is just fine yeah we'll be okay we're at 54% so I'd love to get this in into the printer ssh in like power it on hopefully nothing bad happens when we power it on SSH into the board create the um create the Clipper bin file flash that over to the board and then uh look at the config for a second whatever the default config is they provide make the obvious changes that we see right away and then just start going through the initial check or the initial startup stuff and see how see how far we can make it into [Music] there I'm just keeping my fingers crossed I don't run into any issues with the verification stage I I don't get it like the amount of times I run it and it verifies and fails and then just run it again it works fine is more more common than I would think I I don't I don't know what the reasoning is but it seems to happen fairly often cold [Music] brew the next the next project uh the next big project will be Milo uh we're doing I mentioned a few in between stuff so we're doing two streams that will be printer unboxing first time set up tear like tearing part whatever whatever we want to do we'll dive into the um two trees sk1 and it's the comg gr T300 so both Clipper printers one's corxy one's beds Slinger but pretty beefy looking bed Slinger I'm I'm pretty excited to play around with it actually and um in between that we're building the stealth press which is a Heat insert uh like a Heat insert tool that uses Von parts so um KB 3D as well as the projects Creator are going to be uh sponsoring a One giveaway kit globally too which will be which will be fun o cold brew uh I don't know if I have a favorite I I so so I bought the little cold brew thing that's that they sell on Amazon which is basically just like a picture with a built-in like it gives enough of a cavity inside to fill it with the cold brew and then it filters it out really nicely so when we first got that I was ordering quite a few different bags of cold brew off Amazon just trying different ones and the one um this is just bought like Aron I haven't been ordering the grounds lately so this is stock Stoke stock um and I was having it a lot with some vanilla creamer but lately I've just been having it black and it's been fantastic so the one I'm having right now I'm pretty sure is this one not too sweet um I've really been enjoying that but yeah I I think that they sell their grounds as well and so I've made a few myself and they've they've all been pretty good but yeah I don't know they have a favorite I I kind of like everything I've tried so far while we have time do you see oh did you see that Mandela rosworks is shipping 6mm beds for the K1 Max I did hear that from somebody I don't know if I was just lurking or someone told me that previously um I think that's awesome I think they're they're they're pricey right I think they're like 200 bucks uh Mandela and Rose Works oops I don't know if I really want to put any more into the K1 Max um there's a there's an extruder I might be throwing into it but that's probably where where am I looking here that is a huge truck outside of our house there we go okay so 148 he if I end up holding on to the K1 Max long term maybe I'll pick one of these up but I did print um nearly all the parts for this buildout on the K1 Max and although the bed's still not great I've got it in a much better place ah I've got it in a much better place by shimming it and such I don't think I'm already learned CNC yeah I well uh lightburn is working on our CNC software mil Mage and so I don't know when that's releasing exactly but I'm going to be making a lot of tutorial videos for the software um as part of my job as part of my day job I work for lightburn and so I need to I need to get some hours under my belt with various CNC machines so as far as I'm aware Milo will be compatible I think it's just using standard G code um so that'll be fun um you said give away for what oh uh KB 3D is going to be giving away a stealth press kit along with the creator of stealth press that'll be international shipping that'll be in two weeks from today I might need to take some time I might need to make some when I'm building my V on 2.4 make some c c Brew that's what I drink uh the green unsweeten one green un oh uh let me go back bold and smooth is that the one I don't really I've had that one uh no unsweetened so maybe there's a version of this that's unsweetened bold and smooth but unsweeten I'm Legit drinking a stock ice fruit Cofe they're really yummy they're really good K wants a whole video on the issues my k1c I send them my review video that's amazing what's the latest on that are you still dealing with trying to get them to take the machine back or you're beyond that and now they just want some help with diagnosing things further uh those couple of100 upgrades can add up super quick before you know it you spend a whole their yeah exactly and like there's quite a few things I've got my eyes on in terms of builds and so uh it's one thing again like if if a company's sending it and I'm like if I have the time and the bandwidth and thing I'm interested in typically I'll say okay sure but if it's something that I'm going out and picking up like I'm I don't know that that's what I want to go with there's a few other things I'm looking at project- WISE that I'm probably going to spend a fair bit on and I have to be picky and choosy on what what I'm going with here uh no mil mil Mage Mage like a wizard M Mage yeah they add up really quickly PC still think nothing beats my monster mangle I don't do monsters anymore after uh after the doctor told me like a year ago that I was pre-diabetic I cut out energy drinks completely I think I was doing unsweetened is that even a thing was I doing unsweetened ones for a bit I I don't know I loved I loved my monsters I was doing them like once doing them at I was drinking them like once a week for streams and very much like ramped up my energy and then you I would usually crash a couple hours in but yeah I haven't really I don't think I've had an energy drink I don't think I've had an energy drink in like well over year at this point I think we can all relate to that yeah there's so many things like I want to do that oh did it work did tell me we tell me it worked yes woohoo we didn't get the error you know what it's not this I usually get what's the other um oh what's the other dis image writing utility that is used often um that's the one that I always get errors on it's called oh etcher etcher etcher is what usually gives me the errors okay so let's unplug this let's plug it into yeah Bina etcher yeah that for some reason it's it's etcher I don't know what the deal is I like the software I just don't like that the verification seems to always fail all right so this is MCU cards up top so we don't want that we want down below this is such an awkward this is so awkward I don't think that's the right way I think it needs to go yep like this come on come [Music] on I need oh oh oh oh oh we did it we did it and this one doesn't go in very far this is sketchy one okay so let's not damage the socket that's as far as it goes in I this is my biggest gripe about this like that's that's all the way in right there that is asking to be broken off ah I I I biggest complaint about this board I like this board I can't understand why they couldn't have designed it slightly different for that um okay let's grab power cable steal it from the V minion just doing some testing or some some yeah printing out on the V Minion Okay so let's just we're just going to plug it on laying down there's not much to see um let's plug it in like this the screen's not going to light up because well we don't have the screen plugged in although yeah no we don't all right here we go here we go someone is calling me again same number I don't think this is Spam I'm still not going to answer okay three what board is this this is the E3 EZ is what it's called from Big Tre Tech if I had drink in that monster that I used to have there's no way I would have had the stability to get that micro SD card into that slot all right here we go three two one fingers crossed everybody okay there's a light on on the power supply there's a light on on the board so let's see what happens oh yeah belts are my belts are my Nemesis man at least corxy no even cartisian man just getting routing them is is okay I got I got a voicemail so let's listen to the voicemail really quick two hours ago I got one too oh it's the fence it's the fence guy swing but yep yep let me I'm going to call let me call really quick one second everybody I need to get this fence fixed [Music] [Music] [Music] [Music] I'm back yeah I uh no fence isn't delayed he's going to come by in the morning I have tomorrow so the house has irrigation I me I think we talked about this um let me multitask ask let me look up what the IP is if I see on the network so the house has Irrigation in the front yard nothing in the back so I'm paying the the landscaper that did the front yard to basically run a main line from the front to the back uh and the reason why I don't want to do that myself is it's there's ground cover and rock all over it so having to tear through that while he's got a machine like he's basically going to go to the side and it's going to shove it's a flexible tube not PVC uh a 1in pipe all the way down to the back and then because they only ran the wires there's basically it's an eight Zone sprinkler system and they ran five wires to the front uh solenoids but they're only using two of them but I need I need to now get wires to the backyard where this main Line's going to be so he's also going to be running he's only charging me material cost but he's going to be running another five wire from the sprinkler box to the backyard and just leaving them there I'm going to be once I'm going to be the one that's deciding like where how we want the backyard layout and then I'll the game plan is I'm digging all the trenches I'm running the pipe I'm installing the solenoids I've never done it but I'm like I feel comfortable doing that it's just this I'm like you've got the big machine I'd rather you run the main line versus versus me trying to get underneath all of this rock so anyways that's what's happening uh 12 in Pepper yeah I was actually that was the pizza guy anyways um yeah yeah yeah yeah they're they're still out here working on the neighborhood um I wanted to get this addressed that way when the weather's a little bit better then I can map out and start digging some trenches and laying down some PVC I enjoy I actually I very much so enjoy like landscape gardening type stuff uh I always have so I want to do as much of it as I as I possibly can okay anyways let's get back to where we were so we uh don't see it I don't see it on I don't see it on the network there's no LED there's no status of any sort on the on the cm4 is there all right let's let's go back let's go back let's see if there's something I missed um okay wait a minute is it possible that it's not going to be called I wonder if it's if it's just called something different because the way this board's set up cimport doesn't have a status light but it might just need the external antenna to reach the Wi-Fi network turning off back on again I'm wondering I would think it would be so Espress or Espress if is usually a ESP 32 MKS is not it that's a different machine who who is out what is this there's no IP address on this install the SSH insert minecra D3 wait load power on approxim one to two minutes device will automatically be assigned an IP address to successfully connecting the network and find the name IP name fluid mean sale yeah so it should be called what it's called [Music] here I can see if I've got an antenna really I thought it was a uh no external n on cm4 S by time connected I don't have very many it might be it might be resizing the SD card that takes ages last time I did one of these it's possible it's only 8 GB SD card I know that sometimes the first time it does take a fair bit longer but I I should see main sale still not seeing it I'll give it another minute it's definitely not on the network right now that's funny now now this is this one is actually nice said be careful for spam this is actually spam I get a Spam call every single day at least once a day from a guy that's been trying to solicit web web work web work it's only gabes look at the DP what's the last I just ass signed I missed did you set the custom stuff for the printer name Etc I didn't set the custom stuff for the printer name oh all I set was an SSH login and password and verified that the Wi-Fi credentials were set correctly so let me check I'm me check we're going to do a couple things here all right last thing I'm opening up the the um opening this up one last time to see if I see it I don't see it okay I'm going to kill this okay I'm going unplug it I'm going to try one more time I've definitely had it before where the second time it did work no need for jumpers I just use this board there's jumpers if I remember let me think all right let's try this one more time if you have another printer with the default main sale DNS name it will cause you hassle I don't have one plugged in on the network right now I did I did yeah I set us I know that can be an issue so yeah I did set us that should be correct um I know Phil you're saying I don't need an antenna but just for fun let me see if I've got one from a cm4 if I do we can at least eliminate that pretty quickly as being an issue um I've also got fullblown raspberry pies where is I don't even know where the heck I would have put the C4s um you know what I do have I've got this big old antenna here we go this is from the this is from the Trident from the orange pie so this is a big antenna did I type something in wrong possible Amazon Android yeah it's still not showing up I know I have a hard time believing that it wouldn't be able to be picked up by the router I mean it's it's it's like we're talking 4 feet away from each other right now you can Chuck the SD card into a conventional pie and test if it's working there I could do that um yeah let's do that I'm sad I have to remove my pie but let's yeah let's do that I've got a let me just go grab really quickly a a piie [Music] four let's see you are a not pi4 you are a pi4 okay micro SD card is going into the pie and let's grab power from down here let's just steal it in there I guess actually I need to unplug all this crap there we go okay we are plugging in we've got status LED lights on we'll give this a minute and then we'll check we'll check to see yeah I wish there was a status [Music] LED I I this is my f again first time using a cm4 I just figured heck I've got you know a few Manta boards and some of the CV ones have been spotty so once these were available at retail price I was like I'll pick up a couple of them but yeah I've never used them before so I don't think it's an issue with the micro SD card but let me see if any of the other pies I have in here have a micro SD card in them I can steal because if that's the case that's the case then I can get another here we go here we go 8 gabes yeah let me get another one going let's see who knows I I must be everyone's favorite part of PR I will say like we've got we've gotten pretty lucky I don't feel like normally we maybe I'm just not remembering but I don't think that normally we've had a whole lot of issues with this we got a second one going too it is odd to me though that again it's not saying it can't be reached still on the network yeah that's interesting well we'll see if the second one does better defaults what raspberry raspberry. loal I don't know um on first boot the pie has to expand the storage volume configure ass and a lot of stuff I've had issues with new images hanging doing this stuff recently I had this issue um it looks pretty perpendicular to me uh oh it's it's p it's just p. local I I've had this issue a long time ago I don't think it's is it [Music] pineal I had this issue with um oh octoprint uh I remember octo print I mean years and years ago where uh I was having some pretty big issues with the first boot like some I mean sometimes I would do the exact same thing I'd flash it over again two three times and it would finally work sometimes it would just take time like it would take 20 minutes and all of a sudden it would start working so but I haven't I haven't had that problem in a long time so this is odd to me uh let's go try SSH like zombes said 192.1681 160 101 101 looks like that's [Music] working huh so we're able to SSH into it for some reason it's the web interface that's just not loading and this is a pi4 a brand new Pi four was there an issue with installing I wonder if there was an issue with an installation or something let me go to Kaaya and see what it shows as far as status goes uh is it 192.168 it's 160 yeah it's 160 what they spell wrong oh I didn't do do for all right we're going to copy we're we're not typing it there we go main cell installed weird I don't I don't know oh my God are you serious no you oh it's always user error even when it's not all right okay so we know that this image file works so let's shut this down let's plug this back into our our cm4 and let's see if we can get this to power on the cold brew isn't working I repeat the cold brew is not working okay unplug see we can surgically install this under here make sure I fully inserted I just have like PTSD from the the board I damaged because of it just doesn't yeah that's all the way in and again this says MCU card so host should be on the bottom it's the only other place okay let's let's give this one more [Music] go boom we have power the squirrels did it I can't believe I I said 192.168.1 16 so like four times out loud while typing in the wrong freaking number did you flash Clipper no I haven't flash Clipper on the BCT te Manta but it should still provide power to it should still be providing power to it so that way the cm4 gets power and puts out its uh connection so that way I can you know SSH into it in Flash Clipper so this should this should work um yeah I certainly don't see it again on here so what I might end up doing if it doesn't show up in a second here is turning it off and then we'll try the [Music] antenna yeah I'll give it like two minutes and then we'll try the antenna did you uh b t can it play Doom but can it play Doom yes I'm sure it can also receip cm4 I can do that [Music] hi what's up big dog we're trying to get we're trying to get this thing connected take a jack break what up big guy almost oneyear old he'll be one by next stream did you comb his hair he did he look nice he looks super handsome super handsome all right we'll take a we're going to take a jack break for two minutes here Jack it's not working buddy and part of it dad's fault but part of it is that a microphone is that you who's that handsome guy over there that's you dude the thing's not working the way it's supposed to huh it smoked no no that smoked oh mhm not today a couple days ago no smoke today no smoke today can you say no no smoke today no playing with the microphone No Smoke No Smoke Daddy no smoke he'll get it working yeah the technician has arrived huh what do you think is it my wiring huh is it the firmware I don't know what it is kiddo huh probably Daddy's fault no plenty of no I know yes yes yes you like you like banana tell zombie you like bananas he said Banas are yummy huh yummy big guy all right all right Daddy's got to get back to it we'll hang out though Mommy's got working a little bit and we'll hang out you're so handsome St you're pulling on the microphone kid you're pull the microphone he say I love you doesn't want let go I love you I'm going to be down in just a little bit okay and then we're going to hang out for some hours okay you got him I love you kiddo usual oh banana who is that he's got the same he's got the same uh it's a callus C cic calluses are on your hand right calluses are what you get on your skin like rough guy got the same calic as me right here on the back of his head which gives him cocka to hair [Music] nobody with taste buds like bananas bananas I like banana smoothies a lot banana smoothies are really good and also when my mom was out here she made what was it it was like CH no it was peanut butter almond milk banana smoothies or shakes or whatever and those were delicious okay let's check this one last time and then we're going to turn it off yeah it's not on the network he looks he looks awesome is the weather outside nice yeah all right maybe I'll walk him then if uh once you guys leave oh ah fence SK is coming by tomorrow morning to put concrete around that post so it's May a busy morning okay okay so next thing I'm going to do I turned it off I'm going to unplug the cm4 I don't think I se it it incorrectly cuz there's really only One Direction it can go and it snapped on um actually a nightmare to get off with the way this is um let me see here thank you for the banana zombie and man of the Croc I appreciate it yeah Jack Jack really likes banana I don't like taking this off like this but there's not really a good way to do it okay there we go there we go okay so I am going to be hooking up the orange pie antenna someone else knows how to send a sticker oh different bananas um so yeah this is the antenna that's off the orange pie I took the orange pie out of the uh Trident when when the main board died and threw a threw a pie in there so Okay so we've got this antenna on so this will rule out whether it's an antenna thing and direction this is the only way this can go the holes have to line up kind of okay the holes are lined up perfectly and we are we're going to press I'm going to just go around and make sure it's Seated on both sides okay that is that is in it is in I've confirmed all right so let's power this on one more time I guess we won't know though whether it was the antenna or me not having it seated correctly but I don't think I think it was seated correctly fliping the switch okay we got power again I had the same problem when I was in my BCT check Pi 1.2 no antenna equals no connection I know that's the case like uh that happened with us on the it was the big tree Tech Nami I think it was the V2 the V1 doesn't have an antenna if I'm not mistaken but the V2 does have an antenna and even though I was really close to the router I could not get a signal through the antenna on bam signal so hopefully this does it I mean I guess I I don't care if it has to have a little antenna in here somewhere you know propped I don't know what I'll do with it but just leave it leave it kind of [Music] there I've seen a few of these live stream 3D printing builds but I must say you uh you are really likable this is relaxing well thank you very much the goal of these is 100% to just sort of hang out have a good time have fun building things if it helps people that's a huge plus I mean it started off because I had a few people well quite a few reaching out over the years on the main Channel saying like oh I'm you know I'm getting frustrated because this that is happening like how like you know watching your videos like you're always getting these things working and you have nice prints and in my head like in that moment or in those moments I realize man people think that like I don't run into issues I'm like I spend hour hours and hours troubleshooting things all the time and this is a very condensed 8 to 10 minutes of that um and so that was a big push for me to like show that no I run into issues all the freaking time like I'm running into issues more than I'm not running into issues it's just the name of the it's it's the way it is when you're when you're building and tinkering with things um and so yeah that was sort of the original purpose of this was to show that it's fine things happen and we'll get through it so um hey I uh I had the same issue with my nummy too did you wait did you see the dummy 13 I made with it no uh-uh I'd love to see it uh send me a photo I I know you were talking about Nami I think you said you're going to be doing a live stream on it but I never saw any info update the hearty the hearty laugh is heartwarming yeah just we have fun we definitely have fun I not seeing I'm not seeing it still so I'm now I'm confused do I have a bad CM po I've never had I don't think I've ever had a bad Raspberry Pi does Raspberry Pi do Raspberry Pi make products that have issues I feel like they're they're always really solid yeah I'm still not seeing it and that's with I have another cm4 we could we could we can swap C4s and if that doesn't work I'm at a loss guys I I really don't know maybe we go back maybe we go back to the cv1 at that point playing Musical musical chairs with this printer yeah I've got one more right here the same same exact thing so we'll we'll let this sit for two more minutes and then it's clearly not the micro SD card because the micro SD card we tried it in the you know I think it is the micro SD card not seat is it not seated correctly I to be seated correctly that's the only yeah that's the only way that's the only way it can go in my CB1 v2.2 came with an antenna no issues with the Manta M M5 MP5 uh what did we pull out of here this is a this is a 2.2 as well so yeah if we have to we'll go back to this we'll go back to this may ask a d question I'm thinking of converting a Neptune for a switch wire but I'd like to keep the bed stock uh I don't regarding the serial number I one I I don't think that's a dumb question I and I don't know the answer to it um I'm not sure I've never seen like what if there is like very rigid parameters of what defines getting a cereal or not like for example I know that the I think the is it the salad fork gives you a trident cereal and I think that the the um Micron or Micron plus gives you 2.4 cereal so there's clearly some leniency in that regard I don't know regarding a switch wire or Ender wire or any cubic wire um I don't know if you don't convert the bed I mean the bed oh yeah there is I guess a fair bit to the bed with the rails and the chain so I don't know that would be a question to maybe ask uh in the voron Discord uh someone might be able to give you a better answer than [Music] me perhaps something to do with the okay let's yeah let's well this is happening I mean we're half an hour into I mean I can't believe that this is the hiccup of the I shouldn't be surprised like this should very well but let's see I didn't see anything else um let's run through documentation oh come on I can't why is this not okay so it's not me are you blocking there you go you're blocking it all right let's make this a little bit bigger here we go so we can all see it okay starting here we got pinouts uh USB power supply after the bit take man has powered up the red light will light up indicating power on when using only us okay that's if you're using a USB to power the board we're not motor voltage Motor Supply voltage no stepper motor driver install the core board via oh oh no no no okay E3 easy pay attention to the direction is shown on the figure below I mean there's only one there's only one direction that you can get this guy in there and that looks correct so that's fine we did that we did that correctly uh okay so that's just that's just direction as shown in the figure the d uh uh wh as shown in the figure below the dpdt switch slides to the right to connect to the UR pin of the coreboard and slides to the left to connect to the usb OTG function of the coreboard when sliding to the right you can use the micro USB cable to connect with the computer then a ch3 so is this saying that if you have it slid to the right for USB you can use an external board that's what it sounds like it's saying to me and it slid to the left which is what I would think we'd want assuming we're connecting via art oh that's weird that it says octopus I don't know that's they must have it must have been a naming naming ER but yeah this seems right to me left to connect the USB o OTG function of the coreboard and then yeah on the right would be if you're using an external board so we should be good BL touch auto power relay power loss recovery RGB wiring I don't think there's anything else GP RZ reie usage download great wait wait the usage of cm4 is slightly different from the Raspberry Pi 34 Etc cm4 needs to refer to the system settings section to enable the systems USB DSi and other interfaces yeah this is just that it's all cm4 so this is saying cm4 light version Raspberry Pi cm4 insert mine SD card choose OS use custom and select the image that you downloaded which we're fine cuz we we didn't download an image instead we use the built-in image how does the E3 easy handle the SD card the manual says the micro SD card you're using is MCU wait wait wait the manual says that it's MCU MCU shows it says the MCU card is is up here on the top on mine where you where are you seeing that um MCU cards on top I'm using I'm using you can't even see it from here it's on the underside of the board yeah I mean we've done this we we've done this this we we got it we didn't do the downloading thing because we used the OS or the the image file built into Raspberry Pi emmc version will not run system for the micro SD card I don't see I I would imagine I would know if I got the emmc version but let's let me let's rule this out really quick let me go to my pshop config yeah it doesn't say anything about emmc I would imagine it's not the emmc version P shop. us this is the exact name of the item I purchased oh there's a CM let's let me see I can find this one second there we go cm4 I got it I got it okay let's just search it here so this is the one I've got I don't think there's any emmc on here yeah it would say emmc in it so mine's not an emmc version so that's not the issue either um I just started watching a couple minutes ago what is the problem we're trying to fix it's not so it's not showing up on the network basically um I I got main sale OS flashed it plugged it in to the to the Clipper host port on this board powered it on it's not showing going up we've taken the SD card out and put it in a Raspberry Pi that's not the cm4 and it popped right up so we know the micro SD card's good so it's something to do with Hardware it seems like it's something to do with Hardware measure the pin on the pie check your voltage see if it's tied at all I think I'm going to swap I haven't swapped right no let's let's swap um big Tre Tech usage I think we're going to swap CM 4S really quick just for fun since I have a second one yeah let me check one last time yeah still not on the network so we'll remove it I would at this stage after the stream plug it into an amplifier via land cable and see if it one L Port lights up and two will tell you I've used C4 this boort but mine is the emmc version so I'm not sure what's not working gotcha yeah I'm wishing at this point I'm wishing I had just splur for the emmc version how at this stage after the stream plug it into the amplifier via land cable you mean amplifier board for for the the cm4 okay antenna's plugged in come on there we go yeah that is on I'm seriously wondering if it's something to do with that stinking micro SD card slot I'm going to spin it I don't see how it could be the other direction but let me just see how much it goes in this other direction with this SD card I just want to R I'm trying like at the point now where I'm like throwing stuff at the wall I don't I don't I have I really have no idea no it doesn't even slide in a little bit that way so I definitely had it in the correct way it's the correct Port yeah that's that's the right way okay here we go 3 two 1 oh how does it connect to the MCU um through like I it's essentially I believe USB I believe it's USB um I mean it's not physical USB but they basically have it on the board let me see if it [Music] shows USB yeah so they have you they have you compile for USB so there like builtin USB on board is what they're using page thir what's on page 13 yeah I'm 100% it's not springloaded it was I I made a video on this board and my biggest complaint was that my biggest complaint yeah we're not going anywhere uh was with that bottom micro SD card slot because of how part stuck out and I've used this board so like I know this board works it was using the CB1 um previously so I I definitely know it works I'm almost I mean I'm at the point now where I'm like maybe we should just see you want it yeah it feels wrong and it looks wrong it looks like it should be spring-loaded it 100% it it Tri me out it majorly Tri me out when I was testing this thing out yeah I don't think it's going to work I I just I don't know [Music] why we might be CB wanting it [Music] I don't have the uh I don't have the uh little thermal pad anymore though so that'll be fun this is the E3 e it's funny cuz it's called the E3 easy I mean it's called that cuz say the easy drivers but so far it's been been really anything but easy I'm blown away I'm blown away that there's a reset button there's the switch again which is if you're using an external micr SD card tfp I mean we've done we swapped Hardware we've verified micro SD cards working we've put antenna on it like I don't know I really don't know what else we could try what is this C4 that keeps trying to connect to my Wi-Fi yeah it's freaking bizarre I mean and there wouldn't be an issue there wouldn't be an issue for me having plugged it into the other podt and then plugging it back into this one right I wouldn't I wouldn't think it would have done anything just for fun let's try this so this is this is the other micro SD card that just finished flashing or it it's been finished flashing I pulled this out of a pie let's throw this in here now after this we've swapped out everything like everything has been one second this is a super awkward angle here we go okay we're in flipping it are all the dip switches set correctly there there isn't I don't know what switches there are the only switch that I've seen is the one up here and this one says I mean we looked at it unless unless they're unless they're uh documentation is backwards this is the only switch I can really see and it says as shown in the figure below the D PDT switch slides to the right to connect the UR pin of the coreboard wait slides to the right to connect to the UR pin of the coreboard and slides to the left to connect to the usb OTG function of the coreboard on sliding to the right you can use a micro USB cable to connect to the computer then a ch340 port will be identified so that doesn't make any to me like what it should be slid to the left then and slides to the left to connect to the usb OTG function is this the port you're talking about Alo I'm we can we can try we can try flipping the switch on this guy too so let's see let's see what happens a minute or two I haven't changed like I haven't flipped any switches and that's the direction it was in with the CB1 and I don't see how it could have just gotten bumped I don't see how it would have just gotten bumped um I Nam this one Ender wire. [Music] [Music] local honestly I would check for some voltage on the P somewhere other way something with the flat what uh what flat cable are you referring to it's all it's all like it's all in the board there's there's no cable that I'm [Music] using uh is your test point five voltage is the supply voltage sorry I don't know the test Point I've never been able to rely on custom name resolution I've always asked to use yeah I've never really used that either I just figured since I named it I'd try it yeah I don't think it's showing up um okay we'll kill power we'll put the switch I don't see how it's that it doesn't make to me it should be the opposite and I've never touched that switch before but what the heck we'll do that and then let me see troubl shooting [Music] cm4 data sheet white paper design Flash setting up boot loader troubleshooting attaching and enabling peripherals yeah I don't know hey LC we're going to we have to call it we have like a hard cut off in 10 minutes but I'm glad you made it we've been playing around with this cm4 for in like 50 minutes now I just don't see again like we swap the cm4sci 4S back to back I mean they're from the same vendor but I bet you if I throw the CB1 in let's let's all right let's let's play around while this is doing its thing let's get a CB1 ready to rock and roll at this point I'm not sure at this point I might actually end up not using E3 EZ and end up going with the SKR board that I have right here with the extended I I just I don't know at this point um I wanted to use it with a cm4 all right so for the CB1 [Music] [Music] we want Clipper kernel I'll download the full [Music] image my good friend bolena etcher there's a status light on the well there's a light like a power light on the uh there's two lights on the actual board itself but the cm4 doesn't have any s I don't know what's going on with the cm4 use minimal you're saying use minimal so it's quicker and then just install Kay or something it's fine we can do minimal I really just want to see if it shows up on the network nope you can power and boot the pie from the USB power with some jumpers okay this is our last Quick attempt cuz I I got to get going eron's got work I'll end up spending some time on this on my own I'll update I'll update everybody next [Music] week what if the cm4 doesn't receive power because the MCU doesn't know what to connect to but you can't even Flash the MCU until you've got power to um you you can't even flash cmcu until you've got your Clipper host set [Music] up wait wait wait what in the manual page 20 it says you cannot install are you [Music] [Music] serious wait page 20 cannot install main [Music] spill where where where am I missing this is for the emmc version though which we're not using plug the micro USB into the USB port of the computer [Music] yeah this just for emmc but so where I don't even see that Luke where where are you seeing that on page 20 I don't see that [Music] when oh is it done it's validating when using cm4 download the image directly also you can download a pure OS image the usage of cm4 is slightly different cm4 needs to refer to the system system settings section wait you're seeing something different hold on hold on hold on hold on no no no if there's I would I'd love it's got to be something stupid it always is like I feel like most most every time and you're looking at E3 EZ as well octopus Pi octopus Max easy SKR mini E3 easy driver Manta E3 easy is this the one you're looking at or is this different this looks like the same so this says big Tre Tech octopus do you have a link do you have a link to what you're looking at Luke if there's another manual I definitely would like to see it because I'm as far as the cm4 goes I'm sort of I I don't know what else to try hey Panzer yeah I don't see I don't see anything else in the repository yeah the the we can I mean we can do that as well I guess so I've got five minutes I don't even I don't even have time to I'll have to play around with it after this but yeah Luke do you have a link to the to the guide you're seeing if you've got a different if you've got a different guide I definitely would like to see it it's the part about usb and DSi I guess cm4 on E3 EZ this is with emmc so that won't apply the same way but I'm still curious to see see Woody flashes okay so this is downloading from main sale OS emmc bet Tech Manta M8 no well I guess this is a cm4 okay so he's downloading directly as well okay so I will try it um I don't know where I don't know what other manual um is out there if you can send a link to it Luke I would love to check it out but I will tonight try downloading just the main sale image uh main sale GitHub it's main sale OS though yeah CU this is source code so mean OS is what I want orange piie orange pie orange piie 64 image all right well for now I'm going to call it I don't know I'm I'm going to see if downloading this image or if there's another guide that maybe has something that's missing but the micro SD card works fine in a regular Pi so it's not that we swapped out cm4 I've looked through the instructions that I see in their GitHub and tried everything I don't know what else there there is to do so if if I can't get it working the the options probably going to be either CB1 or going a different route but I I tell you I always pull lest from the GitHub I've been burned by using a previous only copy and Miss I I this is from the GitHub directly though what I was looking at is what I'm saying I if you've got a newer version can you post it can you post it really quick in in uh in the Discord yeah I don't I don't see the link if you if you can post it I'm curious to see but yeah I'll update everyone let's go back and Stage to the fan ports give us 24 volts end stops five bolts I I can check I've got to get going Aaron's got to take off a work in two minutes though so um yeah I'll figure it out if if there ends up being a resolution I'll talk about it in the next stream um and when I do the final video on the underwire on the channel I can add a snippet basically saying hey this is what I discovered with it I'm hoping we can figure it out again I want to use the CM poers I bought them to use for this board at least one of them so that's that's the game plan this could got be much clearer if the damp P had led cost a couple of cents like temp bet uh yeah yeah this is the board this is the this is the manual that I was looking at this is the one that's called big Tre Tech octopus so we're looking at the same manual you said on page 20 there was something about downloading um I think you said it was on page 20 oh here we go when using cm4 download the image of fluid main sale directly also you can use a Pure OS image okay so it does say it there so I'll try it I I'll try downloading it directly and see if it magically pops up I don't see why it would be different than using the main Cale OS image that's hosted in the Raspberry Pi um Raspberry Pi but imager but who knows so anyways we'll figure it out hopefully I'm hoping as soon as I figure out something like if this works just downloading it from main sale OS website uh once check goes to sleep and and I can get this working I will post in live stream updates that way everyone knows hey this is the secret thing and or not the secret thing but this is what it is so I hope that's it um thank you everybody for hanging out I I was hoping that we would be testing configs and doing stuff so unfortunately a lot of that's going to happen offline um because we just we've got to move on next week to other things but I will do my best when we follow up in four weeks time and I've got some time with this machine actually Printing and doing stuff um going going over everything that I've learned what worked what didn't worked I'm happy to share whatever the final config looks like and and uh you know anything anyone else requests so again thanks to everyone for hanging out um and next week will be next week should be I'm not going to say it's going to be it should be a much more uh troubleshoot free stream hopefully since we're just unboxing a printer setting it up looking at the inside and outside of it and running a few prints so it should be it should be a nice a nice break from troubleshooting anyways I hope everyone has a Wonder ful week thank you all again for hanging out and I'll catch youall next time take care bye everybody
Info
Channel: ModBotArmy
Views: 7,997
Rating: undefined out of 5
Keywords: voron, voron switchwire, switchwire, ender 3, ender 3 to voron, ender, siboor, siboor switchwire, siboor enderwire, siboor voron
Id: Kb0csXD4dc4
Channel Id: undefined
Length: 239min 14sec (14354 seconds)
Published: Wed Feb 28 2024
Related Videos
Note
Please note that this website is currently a work in progress! Lots of interesting data and statistics to come.