Quick and easy hypertube canon - Satisfactory

wanted to show off a quick way to build a hyper tube accelerator or Cannon or whatever you want to call it compared to the ones that people stack like 10 entrances in a row this one only uses three so it's it's a quite a bit less power and it's quick to build so I'll show it off and then talk about how to build it so I didn't actually come up with this design there's an imager post by the user def Sage that explains how to do it and I'll link that in the description but I'll go over how to like troubleshoot some of the issues that come up with it so to start I like to have a two by two Foundation grid you're going to want to put your first uh hyperteap support in the top left and then you're going to post this uh place a second one one tick over and four ticks down and then do the same thing with a third so one tick over one two three four ticks down next step is the tubes you're trying to create a loop from here and a loop from here and you want to be in the auto 2D mode and then the goal is to create the shortest Loop possible so you can see here this is as small as it can get I'm gonna do the same thing on the other side next we're gonna put the entrances on so one here one here and one here and then last step is the power and then each tube here out front to make it work so the way this works is this is your entrance and the place you're trying to go is is you know a tube or a launcher off in this direction so one thing to know is that it's kind of finicky if you walk into it like too fast or at the wrong angle the loop can actually fling you backwards So to avoid this the most consistent way that I have found is to just walk into the entrance uh sort of sort of perpendicular to it so don't Sprint it doesn't matter if you have Blade Runners are not it seems to work fine either way but just walk directly into the entrance and then just take your hands off the keyboard so there you go uh if you do it like that it works like 99 of the time so I hope that was helpful

Channel: Spencer Wood

Views: 15,779

Keywords:

Id: 1GgDqZtAWCI

Length: 2min 53sec (173 seconds)

Published: Tue Aug 09 2022