Part 3 April 10,2024

all right here we are with part three of the rotary parlor and freestall Expansion Project uh this took place or this video videoing of this project took place on April 10th 2024 uh basically uh in this part of the project they've got most of the freestyle up they've got the Footers done for the building where the actual rotary parlor is going to sit now the rotary parlor is going to sit right about in the front of the screen here from here back to about where that now just in between where that white pickup is and uh the bulldozer you can kind of see the concrete wall there that's the uh part where the Rotary parlor building is going to be and then in behind that where those pickup trucks are sitting back to about all where those black uh form pieces are that smat trough into ground that's going to be the back side of the uh holding area and then this is the freestyle that is uh in behind it um they've got both Wings up on the freestyle as you can see and they've got I don't know maybe half to not quite half of the uh Rafters are up on the center portion of it now in the past when we've had barns put up they would put all the poles in they would set all the header plates and they would just basically get all the rafters up and then they'd go into tying it down but um on this project here they've kind of been putting Rafters up and tying them all together uh as they go there has been in the past wind storms that have come up and they have blown structures down that were just partially erected uh before the steel is on the the steel and the roofing and everything that kind of ties everything all together and then of course you've got all the pearlins and uh whatever else like that now this uh cement structure that's down in the ground that is where the manure is going to be collected for uh The Parlor uh itself The Parlor and the holding area and then there's a couple more rectangular Square uh hold um water like gray water holding areas as well and and that will be water will be collected in that and they'll pump the top off they're going to try to pump I think they're going to pump part of the top off of the manure that goes in that uh cement structure as well the round one and uh use the water to flush uh The Parlor down with um let's see here on the uh last couple of barns that we have had built we were kind of planning on this parlor to go in and you can see that Barn to The Far Side that building was built so that it would have the connecting building going right through it from the other Barn to the north side of it uh we're going to fly over to the top side of this we put this Edition on I don't know if it was last year the year before I lose uh track of time here but that Barn way over to our right that was our first uh milk and barn and then the Parlor is attached to the barn to the left of it and that Barn to the left of it that's been added on to like three times and then the barn to the right of it that's been added on to a couple times as well you can see the different colorings in the roof there there uh that's just where the additions have been put on to it and then you can see that building that's way over on the other side Barn 9 that has that um addition put on that that is going to be the connecting building that's going to allow the cows to get out of that barn and come over to this one and now we're flying over the connecting building that's going to come out from under from that Barn that we're over the top of right now and now we're actually flying over um well the whole connecting building uh area here right now eventually they'll close this area in everything will all be tied together but um I just thought I would throw the Drone up I get uh questions in the other videos every so often you know how's the barn expansion project going and I found that this is the easiest way for me to do it just throw the Drone up in the air fly it quick and then try to narrate what you guys are seeing in uh this video now eventually this building that we're kind of over the top of that's got like 40 I think it's 44 40 ft maybe it's 50t added on to it and then eventually we'll add on to that bar and just continue right on through where those uh hutches are now we're kind of flying over the uh connecting building as it comes out of bar 9 and then now we're looking at what is going to be the back side of the Parlor and then the holding area is going to start right where that SM uh gutter is in the ground where those trucks are sitting and The Parlor building you can kind of see the uh the the little footer walls up above that or up in front of that that's where the rotary parlor itself is going to sit now that building is going to be an all metal building it's 10 I think it's 110 by 160 and they didn't feel they could clear span uh a wooden structure uh that wide so that's why we went with a metal build and then you can see they're kind of forming up these uh Square I guess they're rectangular Square rectangular whatever uh tanks and then that's going to be more or less recycled water that's going to come from The Parlor wash uh the the milking equipment wash some of the cleaner hose down is going to go into that area as well um once they get the metal building put up then they will dig the um area out where the Parlor is going to sit underground so that is going to do it for this one um I've got to try to get these out a little faster here it's been a few weeks since this was filmed to the point where I actually get it out to you guys so there'll be more to come and we will keep you posted thanks for watching and we will catch you at the next one

Channel: Farming Fixing & Fabricating

Views: 33,856

Keywords:

Id: dpbq3P2rBnc

Length: 8min 9sec (489 seconds)

Published: Mon Apr 29 2024