MAXIMUM Airflow ENGAGED! - $60 DeepCool CH370 PC Case

alrighty then look at this how can your case do this well if you decide to get this one then you could do this welcome guys and this is the ch370 it's the Deep cools latest case it's a little Micro ATX case but it can fit beefy harder inside let's check it out after the message from our sponsor looking for Affordable Windows or office keys look no further I got you covered head over to scdk.com pick your windows Edition use my discount code le25 to get a 25 on any windows or Office Products once you complete your order after a few seconds you will receive your code in Windows go to settings there should be an activate Windows prompt at the bottom click that enter your code and wait for Windows to finish activation to check the activation status use the command prompt with the command slmgr.vbs XPR and you should receive a notification that the machine is permanently activated once again use code le25 at scdkey.com okay let me clarify something right in the beginning as I said this is the Micro ATX case meaning can only fit motherboard sizes up to Micro ATX no ATX I mean the regular size board so please avoid those questions says it's pointless to ask if it's already set in the video okay thanks first thing Dimensions 413 by 215 by 431 and it's a 5.3 kilograms heavy let's start from the front of the case a complete mesh front with the large Square pattern with this not yet seen thing there is a tab in the bottom that when you pull it kind of becomes like a more ventilated case you can see these gray lines and the other position is like a cross pattern the panel is easy to remove and you can see more clearly how this ventilated thing is working and that there is also a dust filter included which is not easily removable by the way unless unscrewed from the panel I believe that all the dust will be blocked in the front anyway so this should not be a big issue but maybe in like several months it would be nice to clean this so you need to take it apart there the panel is additionally perforated on both sides for maximum air intake and yes you are correct this case comes without front fence this is completely left to the user to decide what to use here in terms of support here in the front you can install three 120 mil fans or two 140 mil fans or up to a 360 millimeters radiator oh and this HDD caddy can be removed if you installed an AIO here I'll show you this once we get to the back of the case possibly the coolest thing about this particular case is the hidden headphone hanger on top corner just push this little button and hang your pair of favorite cans here before we move to the interior this is a four millimeter tempered glass on the side it's magnetically held in place with the latch on the back which you can just pull to open this and you can additionally secure it I mean the panel with adding a screw at the back the interior of this case has all the things a case should have and despite being just a Micro ATX case you can fit awesome stuff inside cable cutouts are all in the correct spots without rubber grommets though but this is a cost savings I guess a large cutout at the back of the motherboard tray is there for the easier CPU color mounting big gap in front so you can fit an area in push-pull config and you get around 90 millimeters of space here so it's plenty enough there is also a GPU anti-sac thingy the GPU holder good one sturdy and also padded with the soft material not to damage your GPU also it is height adjustable maximum GPU length is up to 320 millimeters and CPU Cooler size up to 165 millimeters okay here is another great thing this case has which is not just an aesthetic thing or a gimmick it's a perforated PSU shroud nothing new but this one has a support to mount to 120 mil fans here why is this not a gimmick because the back panel is also perforated in the bottom section so these fans could intake fresh air much better and Supply it directly to the GPU at the back there is one pre-installed and this is 120 millimeter fan in size and this is also the largest supported size on the back of this case of course it has a sliding rail so it can be removed up or down if needed other than that the back side is plain and regular i o Shield cutouts fan rails can be better seen from this angle it has four PCI slots and you can notice that the PSU is mounted from the inside of the case moving to the top of the case magnetic fine mesh you know that I'm not a big fan of these simply because of the looks there are better Solutions so I hope deep cool will Implement them in future release of their cases but once removed there are these large air holes here and also a place for either two 120 millimeter fans or to 140 mil fans or up to 280 size for the radiators the front dial panel is located closer to the right edge of the case and it's including a large power button two USB 3.0 ports with a combo headphone mic Jack between them a big reset button and a little HD Drive activity LED closer to it all right let's move to the back of the case I'm into the right side of the case rear panel is held in place by captive thumb screws it's a good thing and you can see that a perforated bottom area with an integrated dust filter here this is for those two fans in the bottom of the PSU shroud that you can add for the better airflow since this is a smaller case I wanted to show you the back side with all the cables in place so you can see that it's possible to have them all nicely hidden here because these zip type points are present all over the case those help a lot for this Knitter cable organization you can see that there are two screws here for the GPU anti-sac bracket so it's adjustable from the back side of the case we have a place for two SSD drives one at the top left corner or above the PSU the drive support does not end here the drive cage in the bottom can accommodate two three and a half inch drives or one three and a half inch and one two and a half inch drive at the same time the same can be removed and repositioned closer or further from the front if you want more space to hide PCU cables you can completely remove the cage like I did the bottom of the case reveals the screws for that drive cage and also a dust filter for the PSU which is that plain old mesh considering the price point this was expected it does the job but painting you know where to get it back here so here are some pros and cons that you should be aware of this is what I've noticed price is a pro this case is only 59.99 US Dollars and for the price it surely brings a lot of value you can put eight fans in this case even being just in Micro ATX case you can fit 8 fans three in the front two at a top and two at a bottom and one in the back so this is a huge plus so you can have a high airflow machine maybe like the Micro ATX builds I sure do they are cute and you can put beefy Hardware inside unlike with ITX cases which are much more limited even if you put a tick 3 plus slot GPU you can still Mount two fans at the bottom the headphone hanger is something completely unusual and actually useful the another major positive thing is cooling the case is so Airy and will keep your components cool at any point for example I use the GPU here that is known to be hot even without bottom fans installed it was below 70 at Max with bottom fence it managed to reduce the max GPU attempts by 2 degrees it's not much but it is good in the long run as the heat will escape the case much quicker the CPU cooling was not an issue ak-400 zero dark with two colors used in this build managed to keep the CPU below 50 degrees at all times so thermally this is an exceptional case so cons first I did not get a white case it looks much better than this black one it's a personal preference not a cone but it's part of that panda style not a full white so be aware of that so now you know that it comes in two color variants another thing is that there are no rubber grommets I get it that at this price point something had to be sacrificed but come on it's much better with them there is no USBC port on the front i o panel it's 2023 this is a standard now it doesn't matter which price point the case is it's standard now I did mention the top mesh dust filter those need to I know very on the market something like a removable perforated top panel is a much better option plus it would be cost effective as it's already a part of the case just put holes in it and be done it's not an additional cost it also comes with one fan only but considering that you can put 8 fans in this case in total this was left for the user to decide and I respect that decision by Deep cool so all in all this is a highly capable case for some tiny Micro ATX gaming builds Tiny But Mighty as you can put beefy components inside and don't worry about cooling giving it a highly recommended award thanks for watching guys if you enjoyed the video give it a thumbs up make sure to subscribe so you don't miss my future videos see you in the next one [Music] all right

Channel: LevelUP Gaming & Tech

Views: 40,281

Keywords: deepcool ch370 review, deepcool ch370, deepcool ch370 build, deepcool ch370 white, ch370 deepcool, ch370 white, ch370 build, deepcool, gaming pc, deepcool lt720, deepcool lt720 review, deepcool ls720, deepcool assassin IV, deepcool ak620, deepcool ak400 zero dark plus, deepcool ak400, airflow pc case, airflow pc case guide, best airflow pc case 2022 budget, best airflow pc case 2022

Id: dZNLa5niYJQ

Length: 9min 47sec (587 seconds)

Published: Mon Apr 10 2023