LukeFZ Uniscaler FSR 3 Mod Preview 7 Build Fixes Frame Generation In The Last of Us | Adds XeSS v1.3

welcome back guys in this video I'll be using the seventh preview build of luk FC's unit scaler FSR 3 frame generation mode in The Last of Us in order to fix its broken official FSR 3 frame generation implementation I tried using the older versions of this mod in this game the game kept on crashing on my steam deck and R Ali I think it was something to do with Radion GPU this problem is not present in the previous 7 pit this is its update lck here's the best part Intel's upscaler xcss has been updated to the latest version that is 1.3.0 from what I have seen so far xcss produces slightly better looking upscale images than FSR 3 but it does come with a slightly higher performance overhead than FSR 3 I'll try to demonstrate the difference between xcss and FSR 3 UPS scalers in this video you need to subscribe to Luke FC's patreon in order to gain access to their Discord server with the mod files are present the monthly Paton subscription cost around $6 in order to download the mod and just open their Discord server here it is then click on mod releases under mods then click on preview un scaler here look for preview file builds update log there it is then click uh this link mods. LFC doxyz then click on login using patreon need to sign into your patreon account give the permission allow expand Unis scaler downloads expand latest version preview 7 first download common mod files then you need to download Unis scaler first I'll be running the game on my R app I have the set one extreme variant of this device I'm using BIOS version 337 install the latest table GPU drive from AMD adrenaline version 24.31 for this game I have set Thea buffer size to 6gb using a 25 wats manual profile all three power value set at 25 Wat 720p resolution CPU boost disable as always these are the two files that I just downloaded before installing the mode I'll just s the vanilla version of the game to give you an idea about the broken FSR 3 frame generation implementation this last of us I have connected my gate kk3 Max game pad to Al Bluetooth board adrenaline settings free sync enable free sync enable anti- setting enabled display settings in order to increase the stress on the processor I'm using FSR 3 native anti- lasing not using FSR 3 upscaler frame generation enabled motion blood disable 720p resolution I'm using the low preset this is downtown outskirts area here we are hitting the GP bottle leg FPS contest shows that game is running at 70 FPS but you can see how sluggish the game play is almost as if the base FPS is around 35 to 40 camera feels so heavy now I'll be showing you how to install lufc mod we'll be checking the performance in the same area with the mod installed and FSR 3 F generation is working properly extract the contents of common mod files arive file double click select all of the files and folders here copy go back paste them here now extract the contents of uniscale f just one file select copy go back paste it here the nvng gx. file has been moved to the store nvn GX folder now this file is required when you are switching to dlss on PCS that don't have an RTX based GPU not required in this game go back select all of the files and folders except for unisal dos unisal common doip and St nvng GX folder copy paste them in the games install directory this is the directory with the games exe file is present need to paste the files and folders here like this now when you run the game for the first time with the mod installed a TL file will be generated using this file we will be switching from FSR 3 of scaler to X xcss xcss works on any GPU whether it's from Intel Nvidia or AMD it does not matter just launch the game black window with some logs indicate that the mod is working when the menu loads up we'll quit the game we are in quit to desktop go back to the games install directory where you pasted the mod files here look for a unisc doc config.txt iter upscaler is set to FSR 3 by default if your PC has an RTX Bas GPU you can use dlss xss can be used on any GPU so I'll just change the value from FSR 3 to xcss click on file click on Save if you set disable frame generation to True frame generation component of FSR 3 won't work close the file the dll files Cor responding to different up scalers are present in the Unis scaler folder just show you the version of xcss us. Li xs. file right click properties click on details this is the version 13. 0.28 launch the game I'm using the same settings as before 720p resolution FSR 3 native anti-in to stress the GPU frame generation enabled low settings theu we getting around 65 FPS and now the game is running smoothly frame generation is definitely working I hope it's observable big Improvement in terms of performance with Luke FC mod that sluggishness is gone best part is games interface is not FL ring no crashing issue is present in order to improve the game's performance and just use the FSR 3 upscaler component xss will get activated and do it now display settings disable FSR 3 anti- lasing scaling mode set to FSR 3 super resolution quality preset apply changes observe the FPS counter yeah FPS increase up to 90 game is running smoothly just show you some combat this is an empty area look at the next sequence there Joel check out the input response controls are responsive no problem with input delay take out this guy I'll use my weapons over there reload it's a very smooth experience guys we getting around 100 FPS oh no my character was reloading his gun M quality is looking crisp got shot back this guy one more remaining there he is reload [Music] again 95 to 100 FPS I cleared the area okay let's just try to observe the railing Grill here the fine lines I'll be switching to FSR 3 after this UPS scalers often struggle to render the fine lines properly we are getting around 3 to 5 FPS in this sequence I'll switch to FSR 3 now just need to open the mods DL file present in the games installed directory change up scaler value from xcss to FSR 3 click on file click on Save launch the game using the same settings as before I load the same sequence there's Jo the mod will use the upscaler that we specify in the mod DL file irrespective of the upscaler selected in the game settings okay try to observe the railing now when I move the camera around you can see the flickering of textures fine lines are not rendered properly I hope it's observable recording the game using my mobile phones camera big difference in terms of quality between FSR 3 and xcss but we are getting a higher FPS close to 120 with xcss enabled here FPS was around 105 image looks decent when I don't move the camera around but when I move the camera shimmering of textures occur the fine lines are not rendered properly common problem with FSR 3 upscaler now I'll be running the game on my steam deck show you the mod setup process first I'll run the vanilla version of the game I'm using proton experimental as the compatibility lay my steam de is running on stable Steam OS version 3.5.7 game is installed on lson Steam deex internal SSD performance tab Vol level set to three FPS uncapped frame rate limit set to off allot aing setting enable I have the LCD variant of steam deck I have overclocked its display to around 70 HZ refresh it display settings 800p resolution FSR 3 enabled super resolution using its balance preset frame generation on using the low preset with motion blood disabled game load it up here you can see it's running in a sluggish manner FSR 3 frame generation is not working properly the interpolated frames are causing the game to run in a sluggish manner this is not 70 FPS camera feels so heavy oh my God observe the railing you can see the shimmering of textures and I move the camera CA around now I install the mode this is steo running in desktop mode I have already extracted the contents of uniscale common mod files and unisal Al files and just select unisal folder when mm. when mm. dll and uncal Asi files copy them open the games install directory select the game in your St library right click manage browse local files this is the games install directory where the gam cxt file is present need to paste the mod files here paste four items done now you need to add a launch option to the game in order to get the mod working select the game in your stain Library click on the settings C Here Close the promt properties under launch options just type this line of text I'll provide it in the description of this video you can copy it from there and paste it here using protone experimental as the compatible delay I'll generate the mods DML file just launch the game black window with some locks will pop up indicating that the mod is working there you go game should not crash we are in quit to library go back to the games install directory where you pasted the mod files here look for a TL file there it is uniscale conf. tml open it just double click up scaler value set to FSR 3 change it to xcss click on the save button here flop the icon close the file switch to steam gaming mode launch the game still using the same settings 800p resolution FSR 3 super resolution enabled balance preset frame generation enable V disable low reset there's 12 now the game is running be better than before it's still not as good as real 60 FPS but definitely better than before engage in combat use my gun mod definitely works on Steam best part is you can use the mod to enable xcss latest version 1.3 this guy was behind me was looking for him oh he still alive not anymore where's this last guy I think my teammates killed him oh there he [Music] is finally observe the railing again the fine lines are Ender properly using xcss so that's it with the video guys I hope you find it useful thanks for watching and have a nice day

Channel: Gaming DJ

Views: 3,011

Keywords: Gaming DJ, steam deck, valve, steam, steam deck india, steam deck setup, steam deck sd card, steam deck shader cache, steamdeck, steam deck gaming dj, steam OS, shader cache, compat data, linux, The Last Of Us Steam OS, The Last Of Us Steam Deck, steam os v 3.5.17, Rog Ally, Rog Ally vs Steam Deck, Steam OS, Steam Deck vs Rog Ally, 2024, Rog, The Last Of Us Rog Ally, Ryzen Z1 Extreme, The Last Of Us, FSR 3 Frame Generation, FSR 3, Preview 7, XeSS, FSR vs Xess, Uniscaler

Id: ugEF7_fQ6TQ

Length: 16min 11sec (971 seconds)

Published: Tue Apr 16 2024