Let's install Pi TV HAT to enable streaming TV to complement your experience

hello everybody my name is alan from sauber lab and today will be another video showing something about raspberry pi in this video i will show how you can install the raspberry pi db tv hat one of the subscribes told me why don't try to install or to show how you can install this uh tv head and i say yes good idea i think that we can connect this tv head to make your iptv in this way you can connect your satellite and you can watch this tv any place anywhere and you can either uh transmit through the internet you can connect this iptv to your envy or your plex or your kodi or any application that you like in this way you don't need to be fisking your house or you need to have a specific satellite connect to your device you can have on the internet connection and then when i bought this one what they come simple they come a box and inside the box come this is more hat really simple really small that you can connect your satellite and you can do everything that you want if you like this idea and want to learn a little bit more about it we're gonna show but first of all don't forget to leave your like subscribe for the channel let's do it [Music] first points let's explain what i have i have a small tv pie in this inside this box they come a small flask with some screws i didn't use because i print some case for my resin pie and that's i will change once that it's work basically i have a raspberry pi here a raspberry pi 3b this resident pipe 3b i put some heatsink principling the main components that were not because i don't want that they reduce the life or only stop to work it's not the best read sink that you can buy but at least it's simple and small and the application that i'm doing will be good enough because of this heatsink i cannot fit wrecked my head here so they already come with this extension and it's really handy with this extension what you do you get your pi head and you connect just in the top and you slide and press when that's pressed it's connect all the pin disconnect so no problem you can run it in such a way that you don't need to stress have this one you can potentially put these screws here they suggest you put some screw to hold it in position but i will change some things so i don't need to put any screw at the moment but if you want you can do it no problem at all but i would prefer to print something for me that you will look like more pattern profession now already print the base i will only need to design the top and that's it fine have this one in mind then now we can go for our computer and start to do our first setup which operating system that we're gonna install if you think that we're gonna install rasmus ios or raspbian you think correctly so we're gonna open the website to fish website for raspberry pi and here we go in the software option where show us this option so what we're gonna do we can come here and put to see all the loads and which option to uninstall we're gonna install the resin pipe lights you can install the option for desktop and watch all the movies for your raspberry pi or all your tv through the razon pi do everything through the razon pi but they don't like this idea because i think that the razon pie it's a really good component to be as light as possible it you don't overheat and in some place and all the rest of the applications out i think that i never connect uh hmi for this rail raspberry pi apart for one or two times but nine percent of the times i don't connect so if you are one of this person you're gonna install the light if you're not you're gonna put the hdmi and do all the configuration directly here independent of your choice we're going to install the light option if you install the desktop and work well without any lagging and really light please leave your comment enough is elite because i want to save some extra space and very extra capacity for a light option so i come here and we'll do the download this option after finishing the load we can get our sd card connecting our adapter because my computer don't have a specific adapter for it so it's better to do it and we connect in the computer with the sd card connect to the computer we can select our image you don't need to unzip or just compact to do anything because the program will do for you you select the image that you can install in our case it's this sd card only one that's connect i put flash they asked for permission and we accept the permission and once that has been once that has been accepted permission they will start all the process for decomposition and threshold information so we need to wait until they finish if you did everything fine at this stage we'll show the information flash complete so we can remove our sd card and put again in our computer because we're gonna need it so once that i put they appear lots of vehicles that you didn't find cannot open this folder and now open this page this one is the boot what we need to do we need to create a folder called ssh we come here new text document and we create ssh this one's because we're going to access our raspberry pi to the ssh so we need to create this one to allow it once that you put sd card in our resin pi we're gonna put connected to the internet power in and don't forget the satellite so i will do it now once that you plug everything now we can open our putty and access our resin pipe through the ssh in my case my rasmup i have the follow ip address 192.168.1.232 please look the ip of your azenpai you can have a lot of programs that you can locate you can go directly route and locate the ap address so you need to find the correctly paid address for your equipment and we come here and put open they will ask you to make login so i will looking as a pie having password raspberry perry and i put enter and they ask you please go shoot the raspbian config and change your root password because it's not safe so let's do it let's come here i copy sudo and i paste this information run in this page we can come in our system option and they will ask the password let's change it by password they say after you change your password will be changed so exactly what you want to do and put enter and we tape the new password in my case will be test123 and again and i did correctly so i can come here enter after this one i can finish this application because you don't need it and we're gonna clear all the page what's the first thing that we're going to do should before we start our installation if you think about upgrade amp date our raspberry pi you think correctly because we want to avoid that any mistake happen or any problem happen so let's do it now first script that we're going to run is this one suit apt get update for we do the update for our list and that'll take some seconds it's quite fast it is update so let's wait wonderful we finished choppy data release now we're gonna upgrade our system to do this upgrade we're gonna tape sudo pt get upgrade and we run it i read upgrade my system so it will be really fast and don't allowed an upgrade if you wanna do the upgrade for the first time be ready because it will take around five ten minutes depending which kind of sd card and which kind of internet to have and everything so in my case i read already step it is one because take a little bit over time now we're gonna install the application for the tv heads to do it it's simple we come here and run the follow script sudo apt-get install tv header and we do enter they will read all the informations and they will ask you want to install they will take 826 megabytes of your capacity you are sure that you want to do it yes this reason that we buy the tv head and these risks that we install and try to do it yes i'm sure so i come here put yes and enter so now we'll take the same time to upgrade all your data for the first time around the a five ten minutes so let's wait perfect it appears this page we can set up our admin password and user so i will add as a sauber lab and i put enter the squad password tape correctly because they only ask one time do not ask twice so let's tape it and done what they tell you that you can access your application through the port 9981 so you can put your ip address plus port 9981 so let's wait to finish installation before we enter in this port we put enter and wait a little bit more when they appear this information pi raspberry pi so supposedly finish you to do the installation we can clear this page only to be clear it will not affect anything for you so now we can open our web page and try to access the part nine nine eight one wonderful already type it here and my address will be 192.168.1.2232 and the port 9981 so now i can login with my user that's a great salvation lab and my password first time that you do your login they will appear this page where you need to find the language that you want to run out the application so i come here and select as english and here i can select as english as well that will be at the preference language so i select here and put save and next okay they will transfer everything for english and we can come here and save an x again we can define what ip address that's allowed to access what it means suppose that you want to run a plex application or any application or jellyfin application you want only this system or this computer will have access for my tv head so i can put the p address of my system in our case i will be open because i want that everyone my network access it and it will not set for external access if i want to set external access i really suggest you to define a password for user and logging but in our case we're gonna put as open admin user at open user user so let's put here and save next once that appeared this page i needed to go for the network and i select my dpv tv so i come here next now they were at appear the first network that i'm setting as a dvd network and now i need to select where i am so to select it i need to go here and look which option that fit more for my needs australia finlandia and my case it will come here in uk you need kindle in my case i look for which antenna that have a better signal in my case i search a little bit online it's not so difficult and i find that in my case will be suddenly health so i will select this one i suggest you to put the predefined mixes according from the place that you leave i'm not 100 confident that will work in all the regions or any place that you want it's worth for you to check that the band frequency that you have in your country will fit the frequency that they read always you can have different options like uh db in the box you have the dvp t2 and dvd so you can have a different range of fragrance that you can access in my case it will be this one and we come here and put save next once that's you put in 7x they will start to scanned right appear as i ate mixers but they will take a couple of minutes until they finish scan all the mixes so it's worth you to wait you don't need to tune anything they will do everything for you it's only wait before they finish it once that appear 100 check we can come here and put say the next and now we can put map create target and network targeting and put save and next well done you finish all your configuration so we can come here and put finish so once that appears this page we can come here and put now and that we will appear all the problems that now it's running now it's playing so uh we can start to watch some tv let's go to i don't know channel 4 and i put play channel 4 they will start to run the program for the channel 4. the only problem that when you're running directly in this application they sometimes lag a little bit so it's not so good to run directly what we can do we can create our imagery you file where you can share we can stream can create our playlist for it how we can do it it's simple let's get again our channel 4 and that's we come here download program and the red sq to download it we'll put channel four and we save it let's download the second one only to be sure now let's put the channel five and put channel five and i save it so now if i open this folder the right appear channel four and channel five if i open it it will start as a vlc player but will not run it we can come here and open with our notepad plus plus and if you look there appear the name of the program that is running at that exactly time what we can change we can put as a channel before and we can save it so all the time that we open our channel form they will already appear channel for him in the bottom and the name of the file there what we can do as well we can create a big playlist let's open our channel five as well and change our description for channel five and that we copy these two lines and come here in our channel four and past it you can create as much as you want and we come here and save once that is safe if open our channel for the red appear at the both playlists let's go back here and i can change for channel five or i can come here and change for channel four and i come here and stop it and then if i open this file the red appeared in both channels and as much as you wanted to put you can put here also if you want to choose this file this file it's a m3u file if i open here so you can connect directly for your jfing amb plex and that you can have a live stream through that application so you can have the application your phone and you can live stream for others also you can download your phone this uh tv heads application and you can watch your open tv in your phone or any place that you want so guys i hope that you like this video it's only i want to show this option for tv head if work in your country please leave your comments that at least the people that live in the same country as you can buy and install in the same way if you like this video anything that was worth don't forget to leave your like subscribe for the chan and see you next time bye

Channel: Sauber-Lab UK

Views: 237

Keywords: TV Streaming, Media System, TV with Plex, TV with Emby, TV with Jellyfin, Streaming, Open Source App, File Server, Home Lab

Id: rIKaO85IBu4

Length: 15min 45sec (945 seconds)

Published: Tue Oct 19 2021