InSoFast Shipping Container Electric Installation

yeah all right this is a professional-grade hot night and this is a plunge blade now this plunge blade we're going to set for the proper net so we can push it in cut out the foam basically that's it you just loosen these nails and then drop it then you're able to go do a plunge step now this is a measuring stick for where we put the electrical boxes because the electrical box we wanted the same height now I'm taking this all the way up to the very top where the electrical Raceway is going to be before I pull it out so now we have plenty of access to full electrical raised legs now once that once the hot knife gets hot it of course will work a lot faster it'll start to plunge in and really cook so once you get started it's best to run all your cuts all at once and that's what we're doing here pull up are you going to be able to get that other angle again save the phone because those chunks can be put back in once the wire is polled but that's all there is so now what we're doing this we're pulling the wire we're actually going to push it through going stitching the wall together from this end all the way to the very end so it has the wire on as it jumps over here the channels going through and clean and now when we get to this behind we picked an obstruction so on this obstruction but we're gonna have to do pull that out a little bit pull the wire out and we're going to come along the electrical Raceway and take this chunk out let's see what's blocking it all right what we have here is right at the intersection of this panel and this panel we have a chunk of glue that has oozed up and is obstructing this area so that was a pretty significant piece of glue that's going through there all right [Music] okay we're good back her up a little bit okay let me take this box out bring it Jimmy yeah all right so we're going to give ourselves plenty of extra wire right here and I'll fold that over so we don't pull it back now in teach me some more wire okay that should be enough wire for the back box better nothing let's get a little bit more it doesn't hurt to have too much they're dope and the last box so now I'm going to cut out for these electrical boxes it's a triple box and we're gonna run the wire from that box up there to the ceiling fan so this is a pretty complex so now we have access going this way and that way and we'll cut out for the ceiling [Music] this is actually running behind that other box so we can totally skip that one and then you can see it will just go down there and now we're gonna take it and just get this back and then we want to flatten out this section so it goes right up against the beam or better yet right underneath the beam there you go please have one more the sandbox are we going to pull this box down let's not bomb it in there yet and then again just a change in direction and 90-degree bend the pipe you can actually put this piece that came in here back in there cuz has the Raceway is already the wire right in with the race

Channel: InSoFast

Views: 110,533

Rating: 4.7289071 out of 5

Keywords: InSoFast, insulating a shipping container, Rigid insulation, Insulation container, shipping container electric wiring, conex electric wiring, sea cans electric wiring, CX, Container, Panel, shipping container insulation, insulating sea cans, insulating conex, container conversions, rigid insulation, rigid insulation with studs, conex insulation, sea can insulation, ADU, accessory dwelling unit, in-law units, intermodal, intermodal housing, intermodal small homes

Id: d2x3FjyLwc8

Length: 9min 26sec (566 seconds)

Published: Sun Jan 13 2019