HYPERTUBE Designs Blueprints You Need In Satisfactory

Video Statistics and Information

Video
Captions Word Cloud
Reddit Comments
Captions
a few of you have asked recently whether I have some hypertube Blueprints and truth be told I don't tend to use hypertubes as many of you already know I opt to go with trains in all of my Let's Plays and we've just reached that point um in our current let's play so subsequently today we're going to be breaking down how to set up three hypertube setups that you may want to include in your factory first we're going to talk about the Junctions so that you can Traverse your factory with much more ease and then we're going to be talking about using a hypertube accelerator rather than a hyper 2 Cannon to allow you to accelerate yourself to wherever you want to be and then finally I'm going to talk to you about how you can use a hyper tube as an elevator within your factory to go up to the desired floors and I will be building all of these in a blueprint designer so that you can follow this system and create your own blueprints using this or alternatively if you want to save yourself a few minutes you can support me on patreon and you will get access to those blueprints anyway the hypertube junction is the first one that we're going to do and it's really simple to build especially with the blueprint designer because we can follow these little grids here so for example with this we're going to take our hypertube along and place it on the dead center part here and then from here we're going to go to large group well four small grids as you can see here and then two across onto each of the crosses either side of the middle line this is going to give us the right placement for a junction and from here you can split these off however you wish and we're going to add our hypertube entrances now you can place this and connect a previous hyper tube entrance to this I'm going to keep it simple by adding a entrance here and we're going to connect these up I am using a pack utility to give me unlimited power and from here we can place this down this is snapping as a blueprint but you can use the normal default mode to place this where you want and now when you're entering in the hypertube you need to make sure that you're pressing left or right depending on which direction you want to go as you're leaving the first section there you go but as you can see this is a really simple and easy to do blueprint that allows you to Traverse your factory we can also then change this into an accelerator with relative ease the idea behind the accelerator is that we have three entrances one going into the junction and then one that leads back around to the front entrance and then the third entrance for the hyper tube will lead off into your network or into a Canon so to speak the accelerator takes the same concept as the junction that we've just done so we're going to press the a key to go left whenever we're going around the last Bend and as you can see we're going to build up that momentum and then it's going to fling us out through the right hand hole once we reach the optimum speed whoops I thought I was deep water building this is going to be very simple because all we're going to do is take the junction that we've already built and then change what we've got going on the first thing that I'm going to do is remove this hypertube so we have the entrance and we're going to use this as the exit this can either head into another Network or we can shoot it upwards and then the next thing that we're going to want to remove is this Hyper Team we're going to connect it one in front by deleting the back support and we're going to place an entrance just here this allows us to choose left or right and from here we're going to try and make this a little bit smaller from here we're going to bring this back around to the front but we need to have the exit of this line again in the middle here just in front you need to have a little bit of a space so that we can be shot out and then enter here and we're going to start pressing the left key when we're coming around this Bend so if you need a little bit more space to do so because if you do it over here you're going to slow down and eventually stop yourself but this here is the basic system that you're going to need for the accelerator and here we are this time I'm going to aim at the deep water so hopefully we don't die foreign key as we're coming around and you can see we're slowly getting faster then we can choose to leave out whichever point we want and finally we have the elevator guys if you are finding this video helpful please do hit the thumbs up and obviously if you do want to see more don't forget to subscribe we're going to build this one but you can see it's pretty simple we have a few floors placed and we've got two entrances you need one entrance for every floor that you have so first floor is going to require one second floor is going to require one let's get over to the blueprint designer to build the elevator the first thing that you're going to want to place is a wall we're going to go with just the basic wall we're going to go five high the first floor can be as little as two walls high and then any floor above that for this is going to have to be three walls High which I think is acceptable we're now going to grab our hypertube support now I'm going to place this four spaces away from the wall and I'm also going to at this point grab our hyper tube and I'm going to run it up using the wall support up to the next floor the reason why I'm not using the wall holes for this is that sometimes it can get stuck inside the foundation and then you have to use the suicide command and start over which doesn't really work if you're trying to go up and down a building next we're going to place another hyper tube support just above this wall we're going to have this as an unpowered just wall support on its own and this one here is going to be another hypertube entrance which is going to take us to the next floor using the same technique as below at this point we're going to connect our entrances to power and save this this is the basic system and we'll place it just here first I'm going to go to the middle floor by holding down the left key there we go and then we're going to try and go up on the right hand side with the D key and as you can see this works perfectly if you do not have enough space between the floor and the entrance above you're going to find that you're going to get soaked into the uh the next hype tube entrance but guys thank you so much for watching special thanks does go to all of our amazing supporters on patreon most notably our Solas James Irwin 5 less and treble as well as our Lunas the Calamity band star Shoku the Yemen wolf and that dude aw as well as our blood moon of the day which today is the city rat until next time as always ciao for now
Info
Channel: TotalXclipse
Views: 32,935
Rating: undefined out of 5
Keywords: hypertube cannon Satisfactory, Hypertube cannon update 7, Satisfactory hypertube, Satisfactory hypertube designs, Satisfactory hypertube cannon, Satisfactory hypetube accelerator, how to build a hypertube accelerator Satisfactory, Satisfactory, Satisfactory blueprints, Satisfactory hypertube blueprints, Satisfactory Totalxclipse, Totalxclipse, Satisfactory Update 7, Satisfactory Update 8, Satisfactory Hypertube Junctions, Satisfactory hypertube design, Satisfactory hypertube guide
Id: vDEK5xpOPVo
Channel Id: undefined
Length: 8min 53sec (533 seconds)
Published: Wed Jun 07 2023
Related Videos
Note
Please note that this website is currently a work in progress! Lots of interesting data and statistics to come.