How to smoke brisket in a Weber kettle for beginners.

Video Statistics and Information

Video
Captions Word Cloud
Reddit Comments
Captions
how good's that test of a good slice of brisket but it can hold its own weight oh tender hi i'm chewie and in this video i'm going to show you how easy it is to smoke a brisket in a weber kettle this is a no fuss easy cook and if you haven't smoked brisket before you will after watching this so just sit back grab a drink or two and let's get into it i'm lucky enough to be smoking this 7.7 kilogram wx by rangers valley firefly score wagyu brisket that the good people out at gippsland premium meats sent my way to cook first up just putting the gloves on because i'm not a grot and i've got to keep touching my camera so i'll take these off move my camera put on a fresh pair of gloves all right flip it over slice through as you can see this brisket is huge it's bigger than my chopping board so much so i've actually just ordered a new one now always start with a sharp knife and always cut away from you we're going to start with by removing this big thick piece of decor fat it is thick heavy and will not render down in our cook and as i go around trimming the brisket i'm going to round off the edges and next up we're just going to start removing all of the thinner bits of fat and the silver skin just take your time it's easy enough with a sharp knife because you can actually get it under the silver skin and angling the blade up a little bit makes things a lot easier now how aggressive you go on the trim is really up to you but you definitely want to remove all that silver skin spin that around so you can see it and again any sharp edges you just want to round them off a little bit and for a home trim i'm happy with that we're just going to flip the brisket over and we're just going to take a little bit of this fat cap off but there's not a lot slice into it again remember knife always away from you now this is a softer fat you do not have to remove it all but you don't you don't really want lots of it there again this comes down to a personal preference now i have to make this fit a 57 centimeter weber kettle so i am going to start trimming it and shaping it a little bit more i'll spin it around so you can see what i'm doing and these thin bits they're going to dry out so we may as well just trim them down now that's better now we've got this gnarly bit here so i may as well just trim that off now shape it up and also that bit just keep shaping it rounding off those edges now there are two main reasons why we shape a um a brisket as i've already mentioned one is to fit it into the smoker and this one's going to be a weber today and two we just want it nice and aerodynamic so the heat and the smoke roll over our brisket i think just a little bit here and we're pretty much done one last little bit again it's personal preference you keep picking at it you're just going to keep trimming bits off but that i'm happy with now if you've already pre-liked this video cheers much appreciated what good is a brisket if we don't season it we'll be keeping this cook simple and stress-free so we're going to be using our own rub and there's a formula for it two parts coarse black pepper one part kosher salt and half a part granulated garlic did you notice i said parts you can use whatever you want to measure this out teaspoons buckets i don't care make as much as you want and once you have your rub made apply it to the bottom of the brisket first why i hear you ask because the top part's our pretty part and we'll finish on that don't forget the sides now flip it over and do the top did you notice i didn't use a binder that's because i don't think it needs it but by all means if you want to go wasting mustard go for it but don't come blaming me when you don't have any for your hot dogs today i'm going to be using a 57 centimeter weber kettle and i'm going to be utilizing the snake method because i want to be smoking at temperatures around 135 to 150 degrees celsius this is easy enough to do by adding a row of briquettes around the outer edge of the charcoal grate then make a second row making sure it is touching the first row and now add a top row and as you can see i've made the snake pretty much go around the entire charcoal grate i'd rather have a lot more unlit fuel there just in case i need it because trying to add it while it's light is pretty hard we can also add a foil pan to the bottom smoking wood goes on next i'm going to use some cherry and some iron bark just remember when placing wood chunks in leave a 50 mm gap between each piece because the wood burns quicker than the briquettes now lastly you want to light up some briquettes now normally i'd start with about 12 because i want to go a little bit hotter today i threw in 14. i've lit them up and a lot of people ask me how do i light up such a small quantity i use one of these little utensil holders and you can pick them up from most supermarkets and other stores you just dump that at the start of the snake then we can just add the grill back in place and adding an ambient temp probe on the opposite side of the lip fuel so we can track the weber's temp put the lid back on making sure the lid vents wide open and we want that lid vent also on the opposite side of our lit fuel we're going to watch the temp and as it rises and gets close to our target temp we're going to close down those bowl vents you know what this would be a good time for subscribe to the channel if you haven't already while you're there hit that bell button that bell button is going to allow you to be notified every time i throw on some more food the web is at tent now we can get our brisket on now we want to monitor the internal temp of this brisket while we're cooking it so it's better off to put the probe in now that way the lid is only off for a short time so just insert an internal temp probe you can put one in the point and one in the flat if you want i think one's enough now when placing the brisket in the webber you want the thickest part facing the heat source this is going to just protect this thinner part put the lid on remembering to keep the lid vent over our food that way the heat and the smoke is getting drawn over that brisket and just set the internal temp probe to 75 degrees celsius this isn't our finished temp we just want to monitor it up until then now just leave that alone for a couple hours and go and find something else to do the brisket's been in for three hours now it's currently sitting at 55 degrees internally i just want to check it and make sure none of the edges are drying up too much our snakes burnt around to here so we just want to adjust the grate and move our brisket around a bit and the edges are looking a little bit dry so i think we'll give them a spritz and i'll be using my special spritzing recipe today and once we've spritzed it just pop the lid back on now for those of you wondering my special spritzing recipe is one part water to one part water the internal temp of the brisket has just reached 75 degrees celsius and that bark is looking really good so it's finally time to boat in some foil and for those wondering how we pick up hot food just with these thin gloves on we've got these cotton gardening gloves underneath them put the brisket in the center and just roll up the foil to the edge of the brisket effectively making a foil boat now just find a river and let it sail away or just pop it back into the weber until it's probing with no resistance so we are seven and a half hours into the cook how good does that look it's reading 96 degrees internally but more importantly it is probing with no resistance and it's got that nice jelly wobble now any normal brisket will be at this stage anywhere between 93 and 99 degrees celsius but don't go by temp alone use that as a measurement and after you reach say 93 degrees see how it probes and just keep checking it it is time to hold our brisket keep all those juices we're going to wrap it up in a couple of ways of foil now we can wrap this up in an old towel then we're going to grab an esky and we're going to put another old towel down the bottom for some insulation and we want to put our brisket on top of that get it in there another towel on top lid on and i'm going to let this sit aside for two hours at least an hour but two is better you can hold a brisket for a long time doing it like this i've held a brisket for up to six hours and it was still piping hot so i recommend always allowing extra time to hold your brisket because you can hold it longer you just can't speed up the cooking process today i'm smoking at temps of 140 degrees celsius and all up our cook including the whole time of two hours is going to take nine and a half hours or for those of you who like to use my beer timer you're looking at a 19 beer cook i hope everyone's happy we're back on the long beer timers again the time has come let's get the brisket out of the esky and have a look at it wow how how good does that look now using the largest knife you've got preferably a brisket slicer you want to cut the brisket across the grain how good does that look it is literally just oozing out with juice i couldn't ask for a better brisket and then all you want to do is start slicing the rest of it down to 10 to 12 mil thick slices i think we all know i'm gonna say it brisket this good should be illegal as always cheers for watching
Info
Channel: Schueys BBQ
Views: 12,117
Rating: undefined out of 5
Keywords: how to smoke brisket in a Weber kettle, smoked brisket, how to smoke brisket, texas style brisket, bbq brisket, weber kettle brisket, brisket for beginners, beef brisket, Schueys BBQ, Brisket for beginners, low and slow beef brisket, low n slow brisket, snake method brisket, brisket in a weber, smoking brisket, brisket recipe, smoking brisket for beginners, weber brisket, brisket weber kettle, Bbq brisket recipe
Id: tbcD273D2CM
Channel Id: undefined
Length: 10min 17sec (617 seconds)
Published: Tue Nov 09 2021
Related Videos
Note
Please note that this website is currently a work in progress! Lots of interesting data and statistics to come.