HackRF Portapack H2 Assembly

Video Statistics and Information

Video
Captions Word Cloud
Reddit Comments
Captions
oh wow this is cool we got a package today I'm going to add on the portapack H2 plus to the hack RF first we will Begin by removing all the antenna covers and fasteners from the hack RF and then you're going to pry open the plastic enclosure you will need a wedge tool tip to make it easier but once you get it open you can go ahead and set the board aside now we're actually going to assemble the Porta pack we're going to use this double-sided tape first to make sure the battery stays in place between the expansion headers connect the battery cable to the power input module making sure that black is aligned to ground now we're going to take the hack RF board and align the pin headers to the portapack H2 board and press them together to mount the boards next you're going to throw these board spacers in and they should fit in pretty snug now we're going to take the lower half of our case and make sure all the cutouts for the antennas and clock and buttons are good to go remove this screen film then you're going to take the top half of the enclosure and throw it onto the board assembly snapping it in place then you'll use all these screws to secure the case board to the standoff spacers we used previously we finally get to throw the plastic knob on the dial and then we can put the five button caps over onto the dial as well if the device turns on you can press the dial down twice to turn it off and next we will cover how to install the Mayhem firmware onto the portapack which gives some pretty cool features cheers okay bye
Info
Channel: Securiosity
Views: 45,058
Rating: undefined out of 5
Keywords: Flipper zero rf, Hackrf one, Hackrf one portapack h2, Hackrf portapack, Hackrf sdr, custom, firmware, flipper zero, flipperzero, gadgets, hack rf one, hacking, hacking device, hacking gadgets, hackrf, hackrf one, hackrf one tutorial, hackrf portapack h2, mayhem, portapack, portapack h2, radio, radio frequency, rf, rtl-sdr, sdr, software defined radio
Id: 4dRsBhN3PUc
Channel Id: undefined
Length: 1min 41sec (101 seconds)
Published: Sun Mar 05 2023
Related Videos
Note
Please note that this website is currently a work in progress! Lots of interesting data and statistics to come.